Use the latest 2AE NVRAM file from the master branch. This file improves
the EVM performance for the 2AE murata module.
MD5SUM:
- cyfmac4373-sdio.2AE.txt: 6301804650847946c79797387eda9c7a
https://onedigi.atlassian.net/browse/DEL-7936
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Add extra configuration 'CFG_STM32_BSEC_WRITE=y' to the make line to
enable OTP write support.
https://onedigi.atlassian.net/browse/DEL-8074
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
These are available in 'meta-freescale'.
The only difference is that meta-freescale's recipes deletes de SDMA
firmware so the generic one provided by linux-firmware package is used.
We create a minimal bbappend to use the NXP provided SDMA firmware.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also clean some dead code: libjpeg-turbo is the only jpeg implementation
in poky since long ago. Also "remove-libtool" is enabled by default in
bitbake so there is no need to do it in our distro configuration.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit adds Bluetooth Vulnerability CVE-2019-9506
resolution to the firmware file.
CVE-2019-9506 is a Bluetooth key negotiation vulnerability.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://onedigi.atlassian.net/browse/DEL-7134
Co-authored-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The qualcomm.sh script has been losing functionality over time, to the
point that now is just loading the kernel module using 'modprobe'.
Instead, run modprobe directly from the udev rule and get rid of the
qualcomm script.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Reset the FW files to release r00006.3.470144.2a
Verbatim copy of the recipes in DEY-3.2, using command:
git restore -s dey-3.2/master -- meta-digi-arm/recipes-bsp/firmware-qualcomm
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Verbatim copy of the recipes in DEY-3.2, using command:
git restore -s dey-3.2/master -- meta-digi-arm/recipes-kernel/kernel-module-qualcomm
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Explicitly set this variable to keep some necessary scripts in /etc/init.d and
set a "softer" assignment to allow override it.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
For development this would not be needed as it points to AUTOREV, but
for releases we need to specify the SHA1 revision, and this recipe
builds two different branches (for NXP and STM platforms), so we need a
place to define two different revisions.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The recipes have been updated in meta-freescale, and version 1.18.5.imx
is no longer available.
Follow same change in meta-freescale's "conf/machine/include/imx-base.inc".
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The crank storyboard engine is provided in binary format. The RPM
package manager that creates the rootfs needs and explicit runtime
provider for 'libEGL.so', which in the ccmp15 is provided by the
'libegl-gcnano' runtime package.
Fix build failure:
--> Finished dependency resolution
Error:
Problem: package packagegroup-dey-crank-1.0-r0.0.ccmp15_dvk requires crank-sbengine, but none of the providers can be installed
- conflicting requests
- nothing provides libEGL.so needed by crank-sbengine-7.1-r0.3.ccmp15_dvk
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The modalias changed as part of the kernel update to version 5.15.
See commit dd545833b773b20aa7cec10f89bff96014ccb64f in kernel tree.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This fixes a failure in the firmware installation script when trying to
program crank images:
./install_linux_fw_uuu.sh -i dey-image-crank
[ERROR] Could not find file 'dey-image-crank-ccimx6ulsbc.boot.ubifs'
[ERROR] Could not find file 'dey-image-crank-ccimx6ulsbc.recovery.ubifs'
[ERROR] Could not find file 'dey-image-crank-ccimx6ulsbc.ubifs'
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
For the CC6UL 1GB flash variant, the programming of the rootfs exceeds
the current 90 secs timeout, giving following failure:
[Bulk(R):LIBUSB_ERROR_TIMEOUT] fb[-t 90000]: ucmd update rootfs ram ${fastboot_buffer} ${fastboot_bytes} -e
Error: Bulk(R):LIBUSB_ERROR_TIMEOUT
Increase the timeout to prevent the failure.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We don't want the FIPS version of wolfssl to be used by default, so
the recipe is configured as:
DEFAULT_PREFERENCE = "-1"
Unfortunately, DEFAULT_PREFERENCE has lower precedence than the layer
priority, so we need to put the recipe in a layer with priority less
or equal to the other layers having wolfssl recipes (meta-openembedded,
meta-wolfssl). This means in our case using 'meta-digi-arm' instead of
'meta-digi-dey', in which conceptually would fit better.
https://onedigi.atlassian.net/browse/DEL-8036
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Base recipe in Poky has been updated to that version, so we need to
update the bbappend to prevent a bitbake parsing failure.
NOTE: to review the patches once they are updated in
'meta-st-openstlinux'.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
meta-freescale updated to version '10.0.0.imx', so our bbappend fails
with:
ERROR: No recipes in default available for:
... meta-digi-dey/dynamic-layers/freescale-layer/recipes-graphics/wayland/weston_9.0.0.imx.bbappend
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The qualcomm.sh script has been losing functionality over time, to the
point that now is just loading the kernel module using 'modprobe'.
Instead, run modprobe directly from the udev rule and get rid of the
qualcomm script.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
As that's an old VM with limited specs, there is no much gain on using
it over the canonical Stash repositories that justifies the code
overhead and the possible errors due to synchronization problems.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The SRCREV may change depending on the version of the kernel, so it
cannot be a common variable for all kernel versions.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use the canonical Stash repository to avoid synchronization problems
between the repo and the mirror.
Moreover the LOG mirror is hosted in an old VM machine with limited
specs, and although the transfer of the objects is faster, the counting
of the objects to transfer (which is done in the server) takes ages to
complete, so at the end, there is no time gain using the mirror.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Not needed anymore in our layer, as this has been fixed in meta-st-stm32mp.
This reverts commit 786e5c9e56.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Commit 8cba3aaefb in 'meta-freescale' changed the kernel_localversion
function we are using in our kernel recipe. This leads to a not-properly
configured kernel build, where CONFIG_MODULES is disabled. That
config option is needed to build external kernel modules in other
recipes, so those recipes (kernel-module-qualcomm, cryptodev-module,
etc) fail to build.
The commit makes sure the kernel is properly configured for building by
extending the do_configure function in a "prepend".
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
By default STM layer creates extra partitions, the vendorfs partition is
reserved to save custom STM libraries and binaries, however the ccmp15 platform
does not have this additional partition, and stores all the libraries in the
rootfs.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
gstreamer recipes was updated to v1.20.3 in poky layer, so this commit updates
the recipe version for custom bbappends.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
weston recipe was updated to v10.0.1 in poky layer, so this commit updates the
recipe version and refresh a custom STM patch.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the required firmware binaries for bluetooth and wireless
interfaces, based on the release imx-hardknott-drogon_r1.0 (Wireless firmware
v13.10.246.265)
https://onedigi.atlassian.net/browse/DEL-8021
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Building a toolchain/SDK fails for ccmp15-dvk, because the NXP-based
trustfence tools (for example the cst) are not available. Fix the build
by filtering out those tools when the build platform is not NXP based.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It's just a waste of space as we already have the kernel image in the
'linux' partition and that gets mounted under /mnt/linux.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The recipe fails to build for the target, but that is expected, as this
is a tool you need to run in the host or from the toolchain/SDK, so
rework the recipes to restrict only for native and nativesdk.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Yocto 4.0 only supports OpenSSL 3.0.x while NXP's CST (code signing
tool) is still using OpenSSL 1.1.x. So the build fails when using the
Yocto-build OpenSSL. Instead, build OpenSSL 1.1.1 as part of the build of
the CST and link statically against libcrypto, so the resulting binaries
(cst, srktool) do not depend on any specific OpenSSL version installed
on the development computer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
In order to perform the standalone signature process, it was required
to rebuild the Toolchain with Trustfence support enabled.
CST source code is now available for downloading in the Digi FTP, so add
Trustfence sign scripts and cst/srktool to the default toolchain for it
to be used for standalone signature without rebuilding.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit 2c9b721fb9ce38dcd0034e22d95db6e0ee068955)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The enable p2p patch add support for enabling p2p as module parameter setting
it by default to false.
The cfg80211 netdevice fixes the registration of virtual interfaces for kernels
v5.12+.
https://onedigi.atlassian.net/browse/DEL-7986
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Also, fix the sequence number of the GPIO_SET_DEBOUNCE_IOCTL ioctl. Same
fix has been done in Linux.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 16eded4f0edcc603de83be7155f7c09718ba5ddd)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove deprecated versions of recipes updated in other general layers
(poky, meta-openembedded). Also remove duplicated IMX specific recipes that
are available in other BSP layers (meta-freescale, meta-fsl-demos, etc).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
An outdated 'mesa' bbappend on meta-st-stm32mp is making mesa package
fail to build, due to incorrect configure options.
mesa-22.0.0/meson.build:614:2: ERROR: Problem encountered: kmsro requires dri3 for X11 support
Override the build configuration in our layer until the bbappend gets
fixed in ST layer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Yocto is becoming more strict on not using tags in the SRCREV, as that
may lead to problems in the different tasks of a bitbake recipe.
As of Yocto 4.0, bitbake errors when such condition happens, with:
"Recipe uses a floating tag/branch without a fixed SRCREV"
So convert the SRCREV of all tags to the proper SHA1 revision.
Also, extend the 'fix-build-issues' to delete '-Werror' from the
compilation flags. Newer versions of GCC (as the one used in Yocto 4.0)
throw more (new) warnings, and the '-Werror' flag was making the build
to fail.
cc1: all warnings being treated as errors
lim_api.c:1057:17: error: this 'if' clause does not guard... [-Werror=misleading-indentation]
lim_admit_control.c:169:17: error: this 'if' clause does not guard... [-Werror=misleading-indentation]
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* fix arch tune files path in machine config
* update imx-digi-base config file (using as a base the imx-base.inc
config file in 'meta-freescale')
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
By default, the STM layer includes several tools in the SDK, one of which is
the gcc-arm-none-eabi toolchain. However, in the build process it throws the
following unexpected error about an unsatisfied runtime dependency:
Error:
Problem: conflicting requests
- nothing provides libpython2.7.so.1.0()(64bit) needed by
nativesdk-gcc-arm-none-eabi-9-r0.1.x86_64_nativesdk
Since this package works with python3, python2 was deprecated and this tool is
only needed to build Cortex-M4 applications, this commit removes this package
from the default SDK.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds a patch for the qcacld-3.0 wireless driver to read the
wireless MAC addresses from device tree. This patch is based on the original
commit from qcacld-2.0 driver improving and simplifying the code to work with
the new qcacld-3.0 driver.
https://onedigi.atlassian.net/browse/DEL-7916
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the wireless firmware in order to work with the new Linux
qcacld-3.0 wireless driver.
Latest release "r10016.1 - Post-CS3 1.0.016.1" updates the following files from
"qca6574au-le-2-2-1_qca_oem" product branch:
PCIe:
- athwlan.bin (b4fd36922625b7303d006581f6c7cd10)
- utf.bin (0d70048214fea05d1c40b3034e8107cd)
SDIO:
- qwlan30.bin (342cb50ce5c6ff930a65f341c0dfbc77)
- utf30.bin (f94810be89cc2f3e979ab4a57243872b)
https://onedigi.atlassian.net/browse/DEL-7916
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the Linux wireless driver for Qualcomm's chipset to the
new qcacld-3.0 driver.
This update is based on the release "r10016.1 - Post-CS3 1.0.016.1" from
"qca6574au-le-2-2-1_qca_oem" product branch, which uses for a Linux kernel v5.4
the tag "CHSS.LNX_FSL.5.0-01200-QCA6574AUARMSDIOHZ".
https://onedigi.atlassian.net/browse/DEL-7916
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Gonzalo Ruiz
Arturo Buzarra
Javier Viguera
Hector Palacios
Isaac Hermida
Mike Engel
Tatiana Leon