The support to update U-Boot in the redundant partition must be enabled in the project
configuration file by setting the variable "SWUPDATE_UBOOTIMG_REDUNDANT" to "true":
SWUPDATE_UBOOTIMG_REDUNDANT = "true"
This feature is only available for the newer platforms: ccmp13, ccmp15 and ccimx93. Trying to
enable it in older platforms will display a warning and fallback to non-redundant update.
Signed-off-by: David Escalona <david.escalona@digi.com>
Backport of multimedia package for ccimx93 from NXP's Mickledore-based
lf-6.1.55-2.2.0 release. Mainly copies and appends of multimedia
recipes from the new release, and restricted to ccimx93 by changing the
COMPATIBLE_MACHINE, so it does not affect other platforms.
https://onedigi.atlassian.net/browse/DEL-8840
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This new variable establishes the number of 1Kb blocks to skip before writing U-Boot in the
bootloader partition.
Signed-off-by: David Escalona <david.escalona@digi.com>
As part of the integration of the new ML package, also update the
ethos-u-firmware binary built from Stash:
Repo: emp/ethos_u_firmware.git
Revision: bd5506ddba364ad04602d5009b77077f78450b97
Source: NXP's MCUXpresso SDK_2.14.2_MIMX9352xxxxM
Co-authored-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Backport of graphics package for ccimx93 from NXP's Mickledore-based
lf-6.1.55-2.2.0 release. Mainly copies and appends of graphics recipes
from the new release, and restricted to ccimx93 by changing the
COMPATIBLE_MACHINE, so it does not affect other platforms.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The TF-A and OP-TEE images have different suffixes depending
on whether TrustFence is enabled or not, but the suffix variables
themselves must exist independently of whether TF is enabled.
Currently, they were defined on the trustfence.bbclass, and the
variables did not exist when TF was disabled, which caused build
problems, for example, building the SWU file.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This compression method has a better compression ratio than the default (lzo),
but the (de)compression speed is slower, leading to slower read/write speeds.
However, the recovery partition only gets accessed in specific use cases such
as software updates and partition encryption, and it contains an initramfs. The
UBIFS will only be read at boot time to load its elements, but once the
initramfs is loaded in RAM, there are no more read/write operations to the
UBIFS during runtime, so the speed penalty is minimal.
Take advantage of the improved compression ratio to reduce the size of the
recovery image. On the ccimx6ul, the size is reduced by 248 KiB.
https://onedigi.atlassian.net/browse/DEL-8819https://onedigi.atlassian.net/browse/DEL-8825
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This includes also an update and rename of the Edgelock Enclave firmware
package (firmware-ele-imx).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit removes the BOOTLOADER_SEEK_OFFSER, because it has been
moved into the swupdate class and renamed into SWUPDATE_UBOOT_OFFSET.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
This commit adds u-boot swupdate support for all platforms.
Now u-boot can be updated with all our supported update
options. Currently it will only update first partition
u-boot partition.
https://onedigi.atlassian.net/browse/DEL-8749
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
The 'mtd-blacklist' parameter prevents swupdate from acting upon those
partitions that we consider sensitive.
Make such list platform-dependent.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
As part of the integration of the new ML package, also update the
ethos-u-firmware binary built from Stash:
Repo: emp/ethos_u_firmware.git
Revision: a0352b0cf7267c896b55980dedd08daddc780733
Source: NXP's MCUXpresso SDK_2.14.0_MIMX9352xxxxK
And, drop deepview-rt support for ccimx93, as NXP has done the same in
6.1.36-2.1.0 release.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
An anonymous function in linux-stm32mp.inc produces a bbfatal error when
KERNEL_DEVICETREE variable contains more than one device tree. This is our
case since we build the main DT plus a number of DT overlays.
This commit removes the dependency to this include file since we have our
own recipe to build the kernel and it is not needed at all.
It also removes the build of a uImage and the need to provide a
LOADADDR.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Backport of graphics package for ccimx93 from NXP's Mickledore-based
6.1.36-2.1.0 release. Mainly copies and appends of graphics recipes
from the new release, and restricted to ccimx93 by changing the
COMPATIBLE_MACHINE, so it does not affect other platforms.
Notice, that the new version of weston used now by the ccimx93 requires
a different profile file (weston-socket.sh). This profile supercedes the
old 'weston.sh'.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Backport of multimedia package for ccimx93 from NXP's Mickledore-based
6.1.36-2.1.0 release. Mainly copies and appends of multimedia recipes
from the new release, and restricted to ccimx93 by changing the
COMPATIBLE_MACHINE, so it does not affect other platforms.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
LVGL is a free and open-source embedded graphics library that is able to run
in environments with limited resources.
This image includes a desktop environment and an LVGL widget demo (lvgl_demo)
https://onedigi.atlassian.net/browse/DEL-8740
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit adds signed FIT image support for the CCMP1
platforms when using Trustfence.
https://onedigi.atlassian.net/browse/DEL-8591
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Through the inclusion of 'nand-4-256' in BOOTDEVICE_LABELS, the include
file 'st-machine-common-stm32mp.inc' adds strings to MULTIUBI_BUILD and
IMAGE_FSTYPES that result in building ubi and ubifs images.
These are redundant and not needed since meta-digi's
'image_types_digi.bbclass' already generates the needed ubifs images.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8714
These are files for programming images with STM32CubeMX tool.
We don't use the tool or the files. Remove the task to avoid build
warnings.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
BOOTDEVICE_LABELS defines the supported boot device (NAND by default).
BOOTSCHEME_LABELS defines the which kind of boot is supported.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
ConnectCore Cloud Services examples are included in 'dey-examples' repository
so they can be built from here and also imported in Eclipse/Digi Application
Development Environment for Linux with the samples wizard.
The example 'upload_file' has been removed since currently there is no support
for binary data points in the CCCS daemon/client model.
https://onedigi.atlassian.net/browse/DEL-8628
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
This recipe generates several packages:
* 'cccs' includes the CCCS shared library
* 'cccs-daemon' includes the binary and resources to execute the CCCS daemon
(daemon, service and init scripts, configuration file)
* 'cccs-cert' includes the required certificate to use CCCS daemon
* 'cccs-gs-demo' includes the binary and resources to execute the CCCS get
started demo (binary, service and init scripts)
* 'cccs-legacy' includes the binary (all-in-one) application to execute
the legacy CCCS application (aka cloud-connector) and the configuration
file
* 'cccs-legacy-dev' includes resources to develop legacy CCCS applications
(all-in-one) (header files inside 'cloud-connector' and 'cloudconnector.pc'
pkg config file)
* 'cccs-legacy-staticdev' includes static resources to develop legacy CCCS
applications (all-in-one) (static library)
This commit also renames:
* 'CLOUDCONNECTOR_PKGS' variable to 'CCCS_PKGS'.
* 'CC_DEVICE_TYPE' variable to 'CCCS_DEVICE_TYPE'.
https://onedigi.atlassian.net/browse/DEL-8628
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
All the 'altboot' script functionality has been moved directly to the 'altbootcmd' command
in U-Boot, so this script is no longer necessary. Remove it for all platforms.
https://onedigi.atlassian.net/browse/DEL-8674
Signed-off-by: David Escalona <david.escalona@digi.com>
This wks file creates the required GPT and partition layout
to have a bootable SD card with the following partitions:
- fsbl1
- fsbl2
- metadata1
- metadata2
- fip-a
- fip-b
- u-boot-env
- linux
- rootfs
- data
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8120
Equivalent commits in meta-freescale:
71d2a1ad49a3e04d0d401d4e9c52d5a50105b6dc
995f2f0a86da9428af348e72e51beb5063ebd729
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Now that both U-Boot and the SCFW can autodetect the RAM configuration, we can
simplify the imx-boot build process to generate two binaries (one per SOC
revision) instead of eight. Build "flash_spl" imx-boot images and use only one
global defconfig for u-boot.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This update includes automatic RAM configuration detection, and only one SCFW
binary is needed for all ccimx8x variants. Adapt the imx-boot recipe
accordingly.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Backport from NXP's lf-6.1.1-1.0.0 release for the ccimx93 (meta-ml
layer).
This version of flatbuffers is needed for ethos-u-vela version 3.6.0
(backported in following commit).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
When the swu package is generated it needs the right
extension of the rootfs to be formed.
https://onedigi.atlassian.net/browse/DEL-8558
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
These variables are used to generate .sdcard images, and without them, said
generation will fail.
https://onedigi.atlassian.net/browse/DEL-8540
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, the sw-description used for non-dualboot systems will be missing
these values and the software update process will fail.
https://onedigi.atlassian.net/browse/DEL-8513
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Certain platforms share a processor family but need to be differentiated
between them. DEY was using the variable DIGI_FAMILY as the SOM name
rather than the family. It becomes useful to have both (DIGI_SOM as the
more specific, and DIGI_FAMILY as the more generic).
This is the case, for example, of:
- ccmp1 (family)
- ccmp15 (SOM)
- ccmp13 (SOM)
- ccimx8m (family)
- ccimx8mm (SOM)
- ccimx8mn (SOM)
Both variables are used on the machine overrides.
Where DIGI_FAMILY was used, use now DIGI_SOM.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The name of the variable was not very intuitive of what
it contains. This variable expands to the SoC vendor
(NXP or STM).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
By default, our 'cloudconnector' package is installed.
This can be overriden by defining 'CLOUDCONNECTOR_PKG' in the 'local.conf'
with the custom package that includes this application.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
OPTEE_PKGS variable must have a default (empty) value to prevent bitbake
parsing errors.
This fixes a build failure for MP1 platforms where the variable was
undefined in the commit that added the support.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
NXP platforms that have 'optee' in the MACHINE_FEATURES, will install
optee userspace packages (ccimx8m and ccimx93 at the moment).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
An official fix was added to meta-timesys in commit
ae4f6e9854361d4a6d71b6f8b87130268d990b32, so our workaround is no longer needed
This reverts commit 7a77130550.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
David Escalona
Javier Viguera
Isaac Hermida
Hector Palacios
Gabriel Valcazar
Mike Engel
Tatiana Leon
Francisco Gil