Commit Graph

7 Commits

Author SHA1 Message Date
Gabriel Valcazar ee14e6f28e imx-boot: create a symlink to the default 1GB image
This simplifies the creation of the sdcard image.

https://jira.digi.com/browse/DEL-6159

Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
2018-09-04 11:28:45 +02:00
Gabriel Valcazar f6639026d8 imx-boot: remove intermediate binary between mkimage iterations
Since this binary (u-boot-atf.bin) wasn't being deleted, the mkimage makefile
was using the one from the previous iteration, causing the 1GB imx-boot to
contain the 2GB U-Boot.

https://jira.digi.com/browse/DEL-6094

Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
2018-08-10 09:45:00 +02:00
Gabriel Valcazar f10f90d0c7 imx-boot: use different DCD depending on the cc8x variant
Also, move all of the recipe's patches from the .bbappend file to the .bb file,
because the .bb file's modifications depend greatly on said patches.

https://jira.digi.com/browse/DEL-6085

Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
2018-08-01 11:26:35 +02:00
Gabriel Valcazar 77e656cf21 imx-boot: add support for the imx-boot package
This package is the combination of U-Boot and the other i.MX firmware binaries.
In our case, these binaries are: the SCFW, the ATF and the DCD.

The recipe has been ported from the meta-fsl-bsp-release repo, with a couple of
important changes:

    * Support for our platform (based on the mx8qxpa0, which uses A0-specific
      parameters for mkimage and appends the DCD explicitly)
    * Support for multiple UBOOT_CONFIG values (NXP only uses one UBOOT_CONFIG
      string per platform; so the compile, install and deploy functions had to
      be tweaked to build both 1GB and 2GB variants for our platform).

Our DCD patch used in imx-mkimage is also used, since both packages share the
same repo and imx-boot is the one responsible for generating the final,
bootable image.

https://jira.digi.com/browse/DEL-6085

Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
2018-08-01 11:26:35 +02:00
Gabriel Valcazar 02223e2df5 imx-mkimage: update recipe to use the 8qxp_beta2 branch
In order for Yocto to append all the necessary firmware binaries to the U-Boot
image, this recipe needs to be up to date.

Also, remove the older hardcoded SRCREV in our .bbappend file. The file that
gets patched hasn't been modified since beta1, so our patch apllies cleanly to
beta2.

https://jira.digi.com/browse/DEL-6085

Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
2018-08-01 11:26:35 +02:00
Hector Palacios 53e81f5350 imx-mkimage: add DCD for cc8x 1GB Micron MT53B256M32D1
This was done using Excel aid sheet:
  MX8QXP_LPDDR4_register_programming_aid_ValidationBoard_1.2GHz_v7_DBI_enabled.xlsx

Signed-off-by: Hector Palacios <hector.palacios@digi.com>
2018-06-26 18:07:07 +02:00
Hector Palacios 2d28c97cc8 imx-mkimage: add imx-mkimage support
This recipe builds the Device Configuration Data (DCD) that
configures DRAM controller before the bootloader.

Signed-off-by: Hector Palacios <hector.palacios@digi.com>
2018-06-26 18:07:07 +02:00