- create dualboot.bbclass that
- sets DUALBOOT_ENABLED variable
- defines partition names and function for changing the sw-description
for swupdate
- move files from layer into meta-digi
https://onedigi.atlassian.net/browse/DEL-7962
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
On the CCMP1 SOMs, we only consider a single system partition called UBI,
with many UBI volumes.
The variable 'singlemtdsys' allowed to change between this and
a system with multiple MTD partitions with one UBI volume each
(old approach on CC6UL).
This commit removes the variable and uses the logic as if it was set.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Use the latest 2AE NVRAM file from the master branch. This file improves
the EVM performance for the 2AE murata module.
MD5SUM:
- cyfmac4373-sdio.2AE.txt: 6301804650847946c79797387eda9c7a
https://onedigi.atlassian.net/browse/DEL-7936
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This commit adds Bluetooth Vulnerability CVE-2019-9506
resolution to the firmware file.
CVE-2019-9506 is a Bluetooth key negotiation vulnerability.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://onedigi.atlassian.net/browse/DEL-7134
Co-authored-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Reset the FW files to release r00006.3.470144.2a
Verbatim copy of the recipes in DEY-3.2, using command:
git restore -s dey-3.2/master -- meta-digi-arm/recipes-bsp/firmware-qualcomm
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
For the CC6UL 1GB flash variant, the programming of the rootfs exceeds
the current 90 secs timeout, giving following failure:
[Bulk(R):LIBUSB_ERROR_TIMEOUT] fb[-t 90000]: ucmd update rootfs ram ${fastboot_buffer} ${fastboot_bytes} -e
Error: Bulk(R):LIBUSB_ERROR_TIMEOUT
Increase the timeout to prevent the failure.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
As that's an old VM with limited specs, there is no much gain on using
it over the canonical Stash repositories that justifies the code
overhead and the possible errors due to synchronization problems.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit updates the required firmware binaries for bluetooth and wireless
interfaces, based on the release imx-hardknott-drogon_r1.0 (Wireless firmware
v13.10.246.265)
https://onedigi.atlassian.net/browse/DEL-8021
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The recipe fails to build for the target, but that is expected, as this
is a tool you need to run in the host or from the toolchain/SDK, so
rework the recipes to restrict only for native and nativesdk.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Yocto 4.0 only supports OpenSSL 3.0.x while NXP's CST (code signing
tool) is still using OpenSSL 1.1.x. So the build fails when using the
Yocto-build OpenSSL. Instead, build OpenSSL 1.1.1 as part of the build of
the CST and link statically against libcrypto, so the resulting binaries
(cst, srktool) do not depend on any specific OpenSSL version installed
on the development computer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
In order to perform the standalone signature process, it was required
to rebuild the Toolchain with Trustfence support enabled.
CST source code is now available for downloading in the Digi FTP, so add
Trustfence sign scripts and cst/srktool to the default toolchain for it
to be used for standalone signature without rebuilding.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit 2c9b721fb9ce38dcd0034e22d95db6e0ee068955)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 16eded4f0edcc603de83be7155f7c09718ba5ddd)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit updates the wireless firmware in order to work with the new Linux
qcacld-3.0 wireless driver.
Latest release "r10016.1 - Post-CS3 1.0.016.1" updates the following files from
"qca6574au-le-2-2-1_qca_oem" product branch:
PCIe:
- athwlan.bin (b4fd36922625b7303d006581f6c7cd10)
- utf.bin (0d70048214fea05d1c40b3034e8107cd)
SDIO:
- qwlan30.bin (342cb50ce5c6ff930a65f341c0dfbc77)
- utf30.bin (f94810be89cc2f3e979ab4a57243872b)
https://onedigi.atlassian.net/browse/DEL-7916
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This recipe will download and install the required firmware binaries for
bluetooth and wireless interfaces. This recipe is based on the release
imx-hardknott-cynder_r1.0 (Wireless firmware v13.10.246.261)
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds u-boot build support for the CCMP15 platform.
The installation scripts are copies from the CC6UL platform.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://onedigi.atlassian.net/browse/DEL-7797
The sign mode needed for each platform is invariable, and since the platform
is already a mandatory parameter for the script, we can store this information
implicitly. Reflect this change in every recipe where the script is used, but
keep the variable at the Yocto level since it's still needed in several places.
https://onedigi.atlassian.net/browse/DEL-7862
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Javier Viguera
Hector Palacios
Gonzalo Ruiz
Arturo Buzarra
Isaac Hermida
Mike Engel
Gabriel Valcazar