systemd-tmpfiles throws warnings of /var/run being deprecated in favor of /run.
Even though this is corrected automatically, the warnings appear several times
during runtime, polluting the systemd journal.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The file 'manufacturing.xml' file in the manifests repository does not exist.
When building manufacturing artifacts, we must use the 'manufacturing/morty'
branch, that already contains the right repositories to clone.
For a manufacturing job, this commit only adds the 'meta-digi-mfg' if it is not
already there.
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
(cherry picked from commit 379ca469dff949e09c667d1a448012881b8812d2)
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Similar to what we did on sysvinit, stop dnsmasq from starting automatically
on boot so NetworkManager can launch it via dbus.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The postinst script tries parsing the wireless MAC address from the sysfs, and
in case of failure, obtains a random string from /dev/urandom. This caused two
problems when booting with systemd:
* The wifi interface's sysfs entry is not available because the interface
hasn't had time to start up yet, forcing the script to always resort to the
/dev/urandom fallback.
* Even though the postinst scripts are run after populating the volatile
filesystems (as can be seen in run-postinsts.service's dependencies), trying
to read either /dev/random or /dev/urandom at this point in the system's
initialization causes it to lock up indefinitely.
To avoid either situation, add the following changes:
* Immediately exit when running on a non-wireless target, as the script isn't
necessary in this use case.
* Parse the wireless mac address from /proc/device-tree/wireless, which is
guaranteed to always be available when the script runs. By doing this, we can
remove the /dev/urandom fallback entirely.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This script behaves the same way as our custom standby script, with a few
modifications, for example:
* instead of using initscripts to stop/start daemons, it uses systemctl calls
* save variables that are needed when resuming in /tmp, because the script is
executed twice instead of once (when suspending and when resuming)
* remove the locking/unlocking of the critical section and the actual state
change, since that is handled by systemd-suspend now
Also, add a different standby script for when systemd is enabled. Said script
acts as a wrapper for systemd's suspend mechanism.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
In Yocto 2.6, this variable is null whenever systemd is enabled. Explicitly set
this variable to keep some necessary scripts in /etc/init.d.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These changes are needed in order to achieve a behavior similar to our
bluetooth initscripts'.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This service acts as a systemd replacement for our bluetooth-init initscript.
All it does is call the initscript before starting the bluetooth stack.
Since initscripts dissapear from /etc/init.d when disabling sysvinit, move the
script to /etc/. Also, include bluez5-init as a packagegroup-dey-bluetooth
dependency regardles of whether systemd is enabled or not.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These patches don't apply on the latest version of systemd used in Yocto 2.6.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Without systemd, our KEY_POWER events were handled by the ACPI daemon, which in
turn issued a "poweroff" command. With systemd, the ACPI daemon is no longer
available and the events are handled by systemd-logind instead, which also
powers down the system properly. However, NXP added a patch that prevents
system-logind from handling the events, since they use the sc_powerkey instead.
Remove this patch to be able to power the target off via our power button.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also, remove sysvinit and add pam, which is needed by weston+systemd.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, there will be errors due to missing dependencies.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These have been ported directly from NXP's meta-fsl-bsp-release layer.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Since poky commit b6fbb3f3d4d6367b0fd7921078f67057551c7ede
reboot config was moved to init.cfg to provide this configuration
when busybox is selected as the init manager, however it is needed
for initramfs images where no init manager is set (see poky commit
ef4a417ab04779bd9fc8a6540a20cca7d14e98cf).
https://jira.digi.com/browse/DEL-6451
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Fix write operation by moving the re-lock of the mmc partition
after performing the system synchronization, if not the mmc
driver throws read-only errors. Also, improved the code
to avoid compilation warnings because the return values were
not managed in write operations.
https://jira.digi.com/browse/DEL-6449
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Since commit 4b41d9072a304fadbe1cc37c94575f12a2a47fd3 in poky
busybox removes the RRECOMENDS dependency with busybox-syslog,
then we need to explicitly add this dependency in the recipes.
https://jira.digi.com/browse/DEL-6443
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Bitbake was using the imx-atf recipe inside of meta-freescale instead of ours.
Said recipe was compiling a different tag, causing our kernel to stop loading
when using our generated imx-boot images.
Remove our .bb file and add a .bbappend that changes the source code revision
to the tag compatible with the rest of the imx-boot files.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Device tree file names won't have the kernel image type like a
prefix anymore, since thud uses the original file names.
https://jira.digi.com/browse/DEL-6443
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Device tree names don't use KERNEL_IMAGETYPE as a prefix anymore,
since in this version, there are different variable names to generate
device tree files.
https://jira.digi.com/browse/DEL-6443
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
KERNEL_IMAGE_BASE_NAME was replaced by KERNEL_IMAGE_NAME for
consistency between variable names.
https://jira.digi.com/browse/DEL-6443
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Remove git recipe to use the official 1.8.2 release and update
udev rules file to blacklist the network interfaces that ModemManager
must not manage.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Commit 491082c56ce34f3fd644f8d4457ccd52af951087 in poky layer enables
by default some security enhancements and optimizations for the compiler,
These extra checks added by the flag -D_FORTIFY_SOURCE=2 break the
CloudConnector build. This commit disables the extra validations only
for the CloudConnector recipe.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Removed patches already integrated in the OpenSSL code and
refreshed the necessary ones.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
cryptoauth-openssl-engine is not compatible with OpenSSL v1.1.x, until
it will be supported, we disable it.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Wireless tools is deprecated in favor of iw because the
wireless extensions have been deprecated in favor of the
new nl80211 interface for wireless devices.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The defconfig file has been refreshed for the current busybox
version 1.29.2 maintaining the same applets enabled.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This script was added a long time ago and it never gets used anymore, so remove
it from our images.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The point of this recipe is to provide the version of Bluez5 that was
certified. Thes certification does not apply to the ConnectCore 8X, and the
recipe currently fails to build due to missing files. Hence filter out the
ConnectCore 8X from this recipe.
This clears the following warnings:
WARNING: meta-digi/meta-digi-dey/recipes-connectivity/bluez/bluez5_5.41.bb: Unable to get checksum for bluez5 SRC_URI entry bluetooth-init: file could not be found
WARNING: meta-digi/meta-digi-dey/recipes-connectivity/bluez/bluez5_5.41.bb: Unable to get checksum for bluez5 SRC_URI entry main.conf: file could not be found
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
(cherry picked from commit bf9688fd08ac9e8823a5a253bdd1acacd1c0870e)
Trustfence is not supported in the CC8X at the moment. This cleans the
following warning:
WARNING: meta-digi/meta-digi-dey/recipes-core/trustfence/trustfence-initramfs.bb: Unable to get checksum for trustfence-initramfs SRC_URI entry trustfence-initramfs-init: file could not be found
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
(cherry picked from commit 778fc424274fc0983c348f4da6ca09e1a7b5b859)
Gabriel Valcazar
Arturo Buzarra
Tatiana Leon
Jose Diaz de Grenu