Also enable recipe for ccimx93, and pass the correct DTC flags to create
overlays capable DTBs.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also:
* Support ccimx93
* Add all the patches regardless of the platform (remove overrides). The
patches do not clash, so adding all of them eases the maintanance and
the migration to new versions of the imx-atf.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These are just a verbatim copy of the ccimx8mm ones, so the project is
buildable. This file list should be revisited and adapted for the
ccimx93.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use += operator to prevent resetting the value of the EXTRA_IMAGEDEPENDS
variable. That is how it's mostly used elsewhere.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is later overridden in the machine config files, but a default
(not empty) value is needed, to prevent a syntactic error in
init-ifupdown recipe (where it is used).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The poky recipes were updated on the minor version to 1.20.4
but the bbappends were 1.20.3 specific so they did not apply.
Use a wildcard to have them apply even if the minor version
changes upstream.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
(cherry picked from commit 0c73b31cf5)
This allows the user 'weston', which is running the video
backend, to access files on external media, such as USB
disks and microSD card.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8208
In the past, this file was cloned from poky to skip mounting
an already mounted device. This condition was done on poky's
version so the cloned file is no longer needed.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
A new set of meta-freescale updates broke our layer, because they
updated opencv package and our bbappend does not apply anymore.
The build fails at parsing:
ERROR: No recipes in default available for:
meta-digi/meta-digi-dey/dynamic-layers/freescale-layer/recipes-support/opencv/opencv_4.5.2.imx.bbappend
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This allows users of the layer to override the value with a different
default. Same change was done in meta-freescale's imx-base file.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This package includes the concurrent module required by the XBee library
(to use ThreadPoolExecutor)
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
Artifact encryption is now supported for ccimx8mn and ccimx8mm.
This reverts commit 1134e4c07c.
https://onedigi.atlassian.net/browse/DEL-7915
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit 588005bb4b2200e79b180f77671304d9c5bdf509)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
When read-only feature is enabled, the rootfs should be .squashfs
and not .ubifs.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
(cherry picked from commit c32278af74cea8cb38aa81590eaa867be1c739c9)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add a new parameter '-i' to update-firmware to let the user
select a specific image_set of the sw-description file to
use during the swu update.
This allows adding different image_sets on the sw-description
and reduce the number of images to build. It also adds more
future-proof flexibility.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8199
In previous line we are launching the mdev in daemon mode. One of the
first tasks the daemon mode performs is a cold scan, so there is no need
to repeat it afterwards.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
On recovery based devices, the swupdate process is executed in the
recovery, so there is no need to have the swupdate daemon running on the
rootfs.
Add a on-target post installation script to disable the swupdate
bootscript on the normal rootfs. This has the side effect of failing in
the recovery initramfs because the initramfs does not have a complete
SysV init system. For that case add a rootfs postprocess function to
delete the postinst script.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add configuration 'BUILD_UBOOT_SCRIPTS' to select whether to build the
boot and install scripts or not, and set it to 'true' by default.
This allows removing the scripts on upper Yocto layers.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
There is a problem when building the SDK because two binaries
have the same name (update-firmware) and makes the compilation
to fail.
Change the name to update-firmware.recovery and create a wrapper
over the update-firmware to check if the system is not dual boot
to call it.
Rework the code to make it more reliable.
Remove the umount of the alternative linux partition, now it is
not needed because only the active linux partition is mounted now.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Now in the file descriptor we have three different names:
platform, primary and secondary.
Also a link from 'platform' to 'single' to keep backward
compatibility.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
All the dualboot logic will be checked in run time.
To do this:
* Include the altboot.src by default in all the images
* Create a post installation script to change the
firmware_download_path in the cloud connector
* Unify the swupdate file descriptor for dual and single boot
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
This commit removes duplicated and unused build artifacts for the ccmp1
platforms. Also fixes a build warning related with flashlayout config file.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit modifies the cloud connector configuration to use
'remotemanager.digi.com' URL since it does not use certificates for the
connection.
'edp12.devicecloud.com' only allows connections with certificates.
The certificate is downloaded during the first device connection to DRM and
stored in '/etc/ssl/certs' directory inside the 'rootfs' partition.
Following connections must use this certificate.
After a firmware update 'rootfs' partition is re-programmed (standard boot)
or changed to use the corresponding partition of the other block (dual boot). In
any case the certificate downloaded is not available anymore, so the device is
not able to reconnect.
Currently there is no a 'immutable' partition to store the certificate, that is,
a place where the certificate is not removed during a firmware update and can
be used by the cloud connector (similar to the 'data' partition on a ccmp1)
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
The directory '/etc/ssl/certs' is in the 'rootfs_x' partition for dual boot or
'rootfs' for standard boot. In any case this certificate cannot be used after
updating because it is stored in the other block partition (for dual boot) or
because the whole partition has be re-programmed (for standard boot).
So, after a firmware update the device will not be able to reconnect to DRM
unless the user revokes the certificate.
This commit changes the certificate directory to be '/mnt/data' where 'data'
partition is mounted. This is not erased during a firmware update, so cloud
connector can use the already downloaded certificate and the device is able to
reconnect to DRM.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
This commit fixes the issue in Jira
https://onedigi.atlassian.net/browse/DEL-7827 (and in GitHub
91bfa01a52#),
that is being manifest again in a CC6UL with 1GB although it may affect other
hardware.
Partitions are mounted:
* For multi-MTD systems, when an MTD subsystem event is received.
* For single-MTD systems, when a UBI subsystem event is received.
This commit avoids process UBI subsystem events in multi-MTD systems.
The automount rules filter UBI subsystem events to only process 'ubi0*' (the
only UBI device/volumes in a single-MTD) and then the executed script
'mount_digiparts.sh' checks for the existance of '/dev/ubi1' node to consider
the system multi-MTD instead of using 'singlemtdsys' U-Boot variable that only
exists on CC6UL.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
* Use 'MOUNT' variable instead of 'mount' command
* On the MTD subsystem event, stop looping once the UBI device number is found
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
This override is used in STM BSP layer on some recipes. Adding it to our
machines fix a build failure on the gcnano-driver-stm32mp recipe.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Increase the timeout from 90 to 120s since it's a large image
and it may take more time on different NANDs.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The U-Boot environment resides on a UBI volume. The uuu script
relies on the environment to save part of the commands that
U-Boot needs to execute after reboot in the middle of the
installation. If the UBI volume 'uboot_config' does not exist
the installer fails.
This commit:
- Creates a function -on the uuu script only- for obtaining
the result of running any U-Boot command (0=success, 1=error).
- Checks the existance of 'uboot_config' volume.
- Runs 'ubivolscript' script to create the UBI volumes layout
that generates the environment volume if it doesn't exist.
- Increases the timeout for running the 'ubivolscript' since
there are occasions in which 'ubi part' (which is part of the
script) takes more time (if it cannot find the fastmap).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Javier Viguera
Hector Palacios
Arturo Buzarra
Tatiana Leon
Gonzalo Ruiz
Francisco Gil