Instead of the 20 seconds hardcoded currently in the code, allow to
configure the response timeout in the connectivity section of the main
NetworkManager config file.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Currently in a systemd based init, the httpd server is not launched. A
systemd service is needed, so add it.
Also install a CGI script that allows to use the device for the
NetworkManager connectivity check.
https://jira.digi.com/browse/DEL-6577
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There's a recipe in the thud branch of meta-openembedded specifically for the
opencl-headers package, but it's also provided by imx-gpu-viv. This generates
build errors when parsing the recipes and when populating the sysroot for
opencv.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Make our vulkan sub-folder match NXP's by updating recipes, deleting ones that
are no longer needed and adding new ones. Also, stop forcing 1.0.65% as the
preferred vulkan version.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
Change the .bbappend name so it's compatible with all versions of the package.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
Change the .bbappend name so it's compatible with all versions of the package.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
The code revision is exactly the same as the one in v6.2.4.p2.3, so simply
rename the recipe and delete files that are not necessary anymore.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
Instead of having one common .inc file and one .bb file per architecture,
we now have one common .bb file for both architectures.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The watchdog and ADC devices were not being modified to belong
to 'digiapix' group, so the examples did not run properly when
ran as a user different than root.
Reported-by: Andreas Burghart <andreas.burghart@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6581
This patch is included in the rocko and sumo branches of poky to avoid errors
when starting an xserver using DRI, but it was removed in the thud branch in
favor of newer input methods other than SIGIO. SIGIO is still supported, but
not explicitly in the xserver configuration.
Since the vivante driver on the i.MX6 is using DRI and, by extension, SIGIO
(even though there is no way to configure xserver to enable SIGIO support), the
only way to make xserver start correctly is by removing the SIGIO support check
in the code.
https://jira.digi.com/browse/DEL-6565
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Even though systemd support is not yet available for these platforms, add the
scripts so bitbake doesn't fail when building the busybox package.
https://jira.digi.com/browse/DEL-6565
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
* Use the same operation order when resuming interfaces
* Remove unnecessary delay in ccimx6sbc standby script
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, bitbake will try building the aarch64 version of the package and
fail when building ccimx6 images.
https://jira.digi.com/browse/DEL-6565
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Digi Embedded Yocto 2.6-r1.3
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The exported PWM channels now report the channel name under udev
EXPORT parameter.
Add the 'change' udev action type to the udev rules and use that
parameter to change the group ownership of the PWM channels to
digiapix group, so they can be used by non-root user.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
For some reason, even though the general RDEPENDS for this package is correct,
all items are overwritten by the empty class-native version of RDEPENDS, even
when building for the target. Because of this, whenever this python module is
installed and used, it won't work.
Redefine the dependencies needed by the target until the issue is fixed
upstream.
https://jira.digi.com/browse/DEL-6553
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Some modems take a lot of time to initialize and ModemManager won't
see them on its first scan.
This service will force a rescan 40 seconds after boot, to give
enough time for those lazy modems.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6366
This recipe adds a script and a related systemd service that
configures two GPIOs (user defined, or else platform-defaults) as
output and sets them to the appropriate value for initializing the
XBee socket:
- XBEE_SLEEP_RQ: is set low, for running the XBee
- XBEE_RESET_N: is set low and then high, to reset the XBee
The service triggers on the condition that the UART TTY device node
pointed to by variable XBEE_UART exists.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6366
On the default device tree, the MCA UART that's connected to the
XBee socket is enabled. This registers as ttyMCA0.
Add a udev rule for this path so that ModemManager checks for
modems in this serial port.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6366
With the re-organisation of the python3 packaging, some of the
packages have disappeared and are now part of base packages.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Otherwise, packagegroup-dey-core won't get included in ccimx6ulstarter images.
This packagegroup contains fundamental OS elements, such as sysvinit, kernel
modules and so on. Use CORE_IMAGE_BASE_INSTALL instead and make sure to append
to the default value instead of overwriting it.
https://jira.digi.com/browse/DEL-6536
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
For CC6/CC6Plus
- Add USER_LED0 alias (same as default USER_LED)
- Change aliases of the other LEDs to USER_LED1 and
USER_LED2 (without additional underscore and fixed
indexes, to match the board schematics)
For CC8X SBC Pro
- Add USER_LED0 alias (same as default USER_LED)
- Add USER_LED1 which was missing
- Increase indexes (due to removed MCA_IO19 on SOM v3)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This modifies the behavior of the sd-resolve libsystemd component to prevent
the system from freezing whenever a service that uses said component is
stopped. Even though this doesn't free the terminated thread's resources
properly, this procedure only gets executed during the final moments of a
service's process before it exits, so resource leaks aren't an issue.
https://jira.digi.com/browse/DEL-6523
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit removes the following examples that were accessing
hardware interfaces:
- dey-examples-adc
- dey-examples-can
- dey-examples-gpio-sysfs
- dey-examples-spidev
- dey-examples-watchdog
The recipe 'dey-examples-digiapix' builds similar examples that make
use of Digi's APIX for accessing the hardware. Add this recipe to images
- dey-image-qt
- core-image-base
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5169
This reduces the number of files that must be modified when changing
branches between development/release modes.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Organize the common code in the recipe to make easy the
inclusion of new greengrass versions.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
This way, the wlan1 interface will only be created whenever a user wants to
bring the interface up with ifupdown. Modify the script to be able to delete
the interface whenever it gets brought down and remove its .sh file extension
so run-parts can run it properly during the ifup process.
https://jira.digi.com/browse/DEL-6353
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Tests have shown that having this interface up hinders wlan0's performance,
so don't bring it up by default.
https://jira.digi.com/browse/DEL-6353
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Javier Viguera
Gabriel Valcazar
Francisco Gil
Hector Palacios
Arturo Buzarra
Gonzalo Ruiz
Alex Gonzalez