The readlink command on a real file was expanding to nothing and then
the '/etc/resolv.conf' file was not being updated with the nameservers.
With this change we only run the 'readlink' link command after checking
that the file is actually a symbolic link.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
When not enough arguments are given (this includes using only the '-h'
argument for help), show the complete help.
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Avoid splitting the boot script message in two different lines:
Starting bluetooth hardware: [OK]
done.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The new line should be printed after the result, instead of before.
Example:
root@ccimx6sbc:~# memwatch -r -w -a 0x2190034
0x02190034: 0x00000000 root@ccimx6sbc:~#
After this patch:
root@ccimx6sbc:~# memwatch -r -w -a 0x2190034
0x02190034: 0x00000000
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
This application tests the MCA comparator feature by configuring
the thresholds, sample rate and other parameters.
Signed-off-by: Sebastian Pastor <sebastian.pastor@digi.com>
https://jira.digi.com/browse/CC6UL-600
After 0e7f5d3a47 both platforms probe both ports,
which is problematic (for example, ttymxc4 is the console in the 6UL based
platforms).
Use more concrete rules to avoid that problem.
https://jira.digi.com/browse/DEL-4199
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
After the kernel update (v3.14 to v4.1) the sysfs path changed from:
/devices/soc0/soc.0/2100000.aips-bus/21f4000.serial/tty/ttymxc4
to:
/devices/soc0/soc/2100000.aips-bus/21f4000.serial/tty/ttymxc4
which caused the XBee Cellular not to be detected on the new kernel. These more
general rules are compatible with both kernels.
https://jira.digi.com/browse/DEL-4199
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
This patch modifies the code of some of the provided samples to be able to run
them in our platforms. By default, these applications cannot find the
certificates in the device, and the command line options are not working.
Patched samples:
* shadow_sample
* shadow_sample_console_echo
* subscribe_publish_sample
See https://github.com/aws/aws-iot-device-sdk-embedded-C.
https://jira.digi.com/browse/DEL-4101
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
Variable 'AWS_IOT_LOGGING_LEVEL' can be used from the project 'local.conf' to
establish the logging level of the AWS IoT Device SDK.
There are 6 incremental levels: none, error, warn, info, debug, and trace.
Default is 'debug'.
https://jira.digi.com/browse/DEL-4101
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
The AWS IoT device SDK for embedded C is a collection of C source files that
can be used in embedded applications to securely connect to the AWS IoT
platform.
The SDK code is available in GitHub and includes the library code and several
sample applications.
A user must provide from its 'local.conf':
* AWS_IOT_CERTS_DIR: Absolute path to the directories where the required
certifies are stored:
* Root CA.
* Device signed certificate.
* Device private key.
And optionally, values for the rest of variables defined in the 'awsiotsdk-c'
bbclass.
This recipe is building the library code and the binaries for the samples:
* shadow_sample
* shadow_sample_console_echo
* subscribe_publish_sample
See https://github.com/aws/aws-iot-device-sdk-embedded-C.
https://jira.digi.com/browse/DEL-4101
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
mbedTLS is an open source, portable, easy to use, readable and flexible SSL
library.
https://jira.digi.com/browse/DEL-4101
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
QMI modems didn't work with the version of
modemmanager that the dey-2.2-r1 release was
using.
We were using two patches for uBlox plugin to use XBee Cellular 3G
that are now merged in modemmanager master.
This updates modemmanager to use the commit where QMI
problem was fixed and also include uBlox patches.
https://jira.digi.com/browse/DEL-4192
Signed-off-by: Salvador Penalva <salvador.penalva@digi.com>
Add patch to MM, so it detects the U-Blox modem connected to the XBee
socket.
https://jira.digi.com/browse/DEL-4084
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Tweaked to maintain some recipes' revisions to AUTOREV instead of the
fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The XBee Cellular needs more time to settle down before MM is able to
detect it on boot. As this is connected to one of the 'ttymxc' serial
ports, use that port to conditionally delay the launch of MM.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Adding more retries to the port AT probing has an impact in modems not
using serial drivers (for example using qmi, mbim). It takes longer for
MM to detect those modems and then user space gives up waiting for the
modems to be available.
This reverts commit 682d77e414.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Pulseaudio 9.0 relies on the syscall memfd_create, which was introduced
in kernel 3.17, but the version currently supported for the CC6 SBC is
3.14.
There is a corner case where the configure script does not detect the
actual kernel version, thus enabling memfd_create. When Pulseadio tries
to call memfd_create, it shows error messages, so disable memfd
explicitly.
https://jira.digi.com/browse/DEL-3923
Signed-off-by: Alejandro Navarro <alejandro.navarro@digi.com>
Added a post-installation script to disable the wireless interfaces on
module variants without wireless support.
This fixes following messages on boot:
wlan: driver load failure
modprobe: can't load module wlan (extra/wlan.ko): No such device
...
https://jira.digi.com/browse/DEL-3781
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The following changes have been made to the bluetooth-init script:
* Remove "hciconfig hci0 up/down" and this is now deprecated and likely
to fail. We use the AutoEnable feature of bluetoothd for this now.
* Move setting the MAC address to hciattach instead of using hcitool.
* Remove resets performed by hcitool and hciconfig. The hciattach
application already performs a reset and that should suffice.
* Remove hciattach retries.
https://jira.digi.com/browse/DEL-3711https://jira.digi.com/browse/DEL-3436https://jira.digi.com/browse/DEL-3636https://jira.digi.com/browse/DEL-3955
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This commits adds patches to hciattach for the following:
* Strict flow control setting
The hciattach application has a flow | noflow command line argument that is
currently only applied on the first configuration of the uart port. The
hciattach_rome plugin ignores this setting and assumes hardware flow
control is always supported. This commits makes hciattach obey the user flow
control indication.
* Modify hciattach_rome to set MAC address. The MAC address setting
feature in the rome plugin now works with the command line specified
MAC.
* Reduce verbosity. hciattach now accepts a "-v" verbose flag. By
default verbose output it omitted.
https://jira.digi.com/browse/DEL-3711https://jira.digi.com/browse/DEL-3436https://jira.digi.com/browse/DEL-3636https://jira.digi.com/browse/DEL-3955
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This 'sed' command was used in the past, when DHCP or MANUAL was
configured in the '/etc/network/interfaces' (for cellular). This is no
longer true as we always configure the interface with a custom (manual)
script.
This was breaking the rest of interfaces when configured to use 'dhcp':
iface eth0 inet manual
umanualc_opts -S -b >/dev/null &
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Launching the MM on target's boot fails to detect the XBee cellular
because this needs more time to complete the initialization. So add some
more retries for the AT port probing to allow the XBee cellular to be
detected.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of redirecting the MM logging to '/dev/null' use a file, so we
can see what's going on in case of failure.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The flow control patches have been merged to the master branch, so
update the revision to remove those patches from our layer.
This reverts commit a7c51af5b8.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Sysinfo was showing error messages if the working directory contains any file
with .log extension.
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
The recovery init checks if the configured update package exists and it is valid
before setting a new key and/or formatting the rootfs partition.
This change avoids getting non-booting devices after performing a firmware
update with a non-existing or invalid update package.
https://jira.digi.com/browse/DEL-3959
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
We have introduced new default configuration files for wireless that do
not show on sysinfo, so add them if they exist.
https://jira.digi.com/browse/DEL-3974
Signed-off-by: Alejandro Navarro <alejandro.navarro@digi.com>
The XBee cellular support is at the moment only in modemmanager's git
repository (master branch).
Also remove one Telit patch from the bbappend because it's already
included in the git repo.
https://jira.digi.com/browse/DEL-3841
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This version of libqmi is needed for newer versions of ModemManager.
Remove bbappend and patch to previous version as the patch is now
included in the new version.
https://jira.digi.com/browse/DEL-3841
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The current script cannot launch the hostapd twice (for dual HostAP mode)
because start-stop-daemon finds an already existing PID for hostapd after
running the first instance.
The solution is:
- Do not launch the hostapd in background (so that it does not fork the
process, which assigns a different PID)
- Use -b option of start-stop-daemon so that it launches the daemon in
the background.
- Let start-stop-daemon create the PID (since the hostapd will not fork
now this PID will match the hostapd process, allowing to kill it later)
This solution also hides the hostapd log messages that appeared before.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-4045
The original init script hardcodes the configuration file to use so it
cannot be re-utilized for concurrent AP/AP mode where two interfaces can
be used as SoftAP.
This commit uses the variable ${IFACE} to:
- select a specific configuration file per interface:
/etc/hostapd_${IFACE}.conf
- create a specific PID file per interface:
/var/run/hostapd.${IFACE}.pid
With this, the /etc/network/interfaces can use the script for using SoftAP
in different wireless interfaces.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
With the migration to Morty, some of the paths to the artifacts (boot
and rootfs images) need to be updated.
While on it, also remove the temporary README.txt file which is not
needed after it has been packed in the zip installer.
https://jira.digi.com/browse/DEL-4013
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Diaz de Grenu, Jose
Javier Viguera
Tatiana Leon
Sebastian Pastor
Salvador Penalva
Mike Engel
Alejandro Navarro
Alex Gonzalez
Hector Palacios