Use the same common files for both ConnectCore 8M platforms
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
We're going to be using the busybox http server to house the WebKit examples,
so we need to get rid of any files that might interfere with it. Keep the files
for the ccimx6ul, since it doesn't support WebKit.
https://jira.digi.com/browse/DEL-7314https://jira.digi.com/browse/DEL-7339
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This image is very similar to dey-image-qt, but it includes the WebKit
packagegroup instead of the Qt one. Said packagegroup contains all of the
elements needed to run a WebKit-based browser environment in DEY.
This image requires the meta-webkit layer, so include it in our default
bblayers template. For now, include all WebKit related recipes in a dynamic
layer, because the ccimx6ul doesn't support WebKit and its projects don't need
meta-webkit at all.
https://jira.digi.com/browse/DEL-7339
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
configure power LED for blinking in standby
configure power LED solid on after resume
https://jira.digi.com/browse/DEL-7330
Signed-off-by: Hector Bujanda <Hector.Bujanda@digi.com>
This version includes changes needed to reflect the OTP driver update in the
kernel.
https://jira.digi.com/browse/DEL-7261
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This package was being included as a RRECOMMENDS from libcrypto, but we don't
need it in the initramfs at all. Since our recovery image is already pretty big
compared with the recovery partition size on ccimx6ul platforms with 256 MB of
storage, remove it to make sure the image can fit.
https://jira.digi.com/browse/DEL-7253
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The old fsl_otp driver is deprecated and we need to determine
if the device is closed using a new property of the device tree
called 'digi,tf-closed'.
Assume the device is open if the property is not found.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7185
(cherry picked from commit fc1a736758)
The old fsl_otp driver is deprecated and we need to determine
if the device is closed using a new property of the device tree
called 'digi,tf-closed'.
Assume the device is open if the property is not found.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7185
By default, we generate SWU files which update both the linux and rootfs
partitions. This, along with the fact that platforms using NAND as the storage
media require a reboot for the rootfs partition's "enc" flag to take effect,
makes it safe to format the NAND's rootfs partition before performing an
update, regardless of having to encrypt the rootfs or not.
However, customers that wish to use the swupdate feature to update just the
linux partition will find that the rootfs is completely erased after the update
is finished, because a new rootfs hasn't been written in its place.
To avoid this scenario, parse the SWU package's description to verify that it
contains a rootfs image before formatting the partition.
https://jira.digi.com/browse/DEL-7067
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Busybox's device manager mdev was originally meant to be set up by writing its
path to /proc/sys/kernel/hotplug before launching it, but that entry no longer
exists in Linux v5.4's procfs and mdev can be launched directly.
Since mdev is the element in the recovery initramfs that is in charge of
mounting all partitions where .swu packages can be found (update partition on
the eMMC/MTD, uSD and USB), checking for the existence of the hotplug entry in
the procfs before launching mdev in v5.4 was preventing the partitions from
being mounted, and causing all software updates to fail.
While at it, move the two second delay to before mdev is launched, so all
partitions can be mounted. Otherwise, some devices such as the USB might not
be ready when mdev is launched, causing its partition to not be mounted.
https://jira.digi.com/browse/DEL-7143
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
MMC core block has changed in kernel 5.4 so Replay Protected Memory Block (RPMB)
and boot partitions are not listed under /proc/partitions anymore.
get_emmc_block_device() function in pkg_postinst_ontarget() method was looking
for these entries to identify the MMC partition where to execute resize2fs.
This function has been modified to do the checks inside /dev/mmcblk* where RPMB
and boot entries are still listed.
https://jira.digi.com/browse/DEL-7094
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
This interface should be the last item defined in the
/etc/network/interfaces file.
When you try to enable the interface br0 (bridge interface),
all the other interfaces should be available.
If the br0 interface is located before the other interfaces
involved in the bridge, it will fail.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
* prefix TRUSTFENCE_ to variable SIGN_MODE for DEY
* prefix CONFIG_ to variable SIGN_MODE for script
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The poweroff command is not available in the initramfs due to a missing
sysvinit/systemd dependency. Use the busybox "halt" command, since it's
available regardless of the init manager used. Rework the error message and
script variables accordingly.
https://jira.digi.com/browse/DEL-6983
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Userspace firmware loading support is required for the Linux imx-sdma driver.
The patches that accomplish this were originally in poky, but were removed in
the thud upgrade. Re-work the patches so they apply over systemd v239.
https://jira.digi.com/browse/DEL-6932
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
In very rare cases, random services would hang when powering off the system,
causing the poweroff process to stall for 90 seconds before timing out the stop
job. To avoid this behaviour, minimize the effect of these random freezes by
decreasing the timeout.
The default services in our system take well under 15 seconds to stop
gracefully, so we can guarantee that a timeout will never happen under normal
circumstances.
https://jira.digi.com/browse/DEL-6794
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Use ifupdown variable 'p2p-network-id' to pass a WPA supplicant network
id, to pre-populate some parameters (SSID/passphrase) when creating the
group where this device is the GO.
Also replace go_intent=7 with the auto parameter. According to the
documentation:
"auto" can be used to request wpa_supplicant to automatically
figure out whether the peer device is operating as a GO and if so,
use join-a-group operation rather than GO Negotiation.
https://jira.digi.com/browse/DEL-6741
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit fixes the error message when specific network scripts
are launched.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-6728
Commit 074e3ba3 ("meta-digi-dey: add cryptsetup tool into initramfs") added
the runtime dependency to cryptsetup for all platforms, but it is
required only to encrypt/decrypt block devices.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit disables file system check on the root file system when it is encrypted.
This prevents the service from failing on encrypted rootfs with the message:
[FAILED] Failed to mount /run/media/mmcblk0p3.
See 'systemctl status run-media-mmcblk0p3.mount' for details.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-6655
To avoid possible conflicts with NetworkManager, remove systemd-networkd
entirely.
https://jira.digi.com/browse/DEL-6610
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The Replay Protected Memory Block (RPMB) is an special storage
partition that cannot be accessed via standard block layer.
When a user space tool like blkid, tries to read it the kernel
suffers buffer I/O errors and timeouts.
This commit modifies the post installation script to filter the RPMB
partitions from the mmc block devices, to avoid multiple kernel
errors during the script execution.
https://jira.digi.com/browse/DEL-6609
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Removed the platform dependency to apply the resize to all platforms.
https://jira.digi.com/browse/DEL-6609
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This recipe is an example for customer for a system-monitor. Scripts that
verify the system status can be added to /etc/system-monitor.d
The recovery mechanisms can be implemented on those scripts or in the
system-monitor script. The software watchdog systemd support is used to
guarantee that the system-monitor is running.
When using this it is recommended to enable the systemd hardware watchdog
support, refer to the systemd documentation for this.
The systemd service provided by this recipe is not enabled by default as it
is an example that needs customization.
https://jira.digi.com/browse/DEL-6593
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Currently in a systemd based init, the httpd server is not launched. A
systemd service is needed, so add it.
Also install a CGI script that allows to use the device for the
NetworkManager connectivity check.
https://jira.digi.com/browse/DEL-6577
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Even though systemd support is not yet available for these platforms, add the
scripts so bitbake doesn't fail when building the busybox package.
https://jira.digi.com/browse/DEL-6565
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
* Use the same operation order when resuming interfaces
* Remove unnecessary delay in ccimx6sbc standby script
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, packagegroup-dey-core won't get included in ccimx6ulstarter images.
This packagegroup contains fundamental OS elements, such as sysvinit, kernel
modules and so on. Use CORE_IMAGE_BASE_INSTALL instead and make sure to append
to the default value instead of overwriting it.
https://jira.digi.com/browse/DEL-6536
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Gabriel Valcazar
Arturo Buzarra
Hector Bujanda
Hector Palacios
Mattias Lindblad
Francisco Gil Martinez
Mike Engel
Javier Viguera
Jose Diaz de Grenu