Currently in a systemd based init, the httpd server is not launched. A
systemd service is needed, so add it.
Also install a CGI script that allows to use the device for the
NetworkManager connectivity check.
https://jira.digi.com/browse/DEL-6577
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Even though systemd support is not yet available for these platforms, add the
scripts so bitbake doesn't fail when building the busybox package.
https://jira.digi.com/browse/DEL-6565
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
* Use the same operation order when resuming interfaces
* Remove unnecessary delay in ccimx6sbc standby script
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This script introduces a minor delay when the own script
launch the wpa_supplicant daemon, however this minor delay
is needed in the boot process when the wireless interface
is loaded, if not the bridge mechanism throws an unexpected
error trying to add the interface to the bridge before the
wireless is ready to use.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Soften the dependencies between the services and start the bluetooth stack
regardless of the existence of a bluetooth chip. Also, update the standby
script to reflect that there is no longer a strong dependency between the
services.
https://jira.digi.com/browse/DEL-6452
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Latest update to version 1.29.3 in upstream breaks the compatibility
of our bbappend, to avoid it in future updates, this commit
generalizes the bbappend to apply all the 1.29 series.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This script behaves the same way as our custom standby script, with a few
modifications, for example:
* instead of using initscripts to stop/start daemons, it uses systemctl calls
* save variables that are needed when resuming in /tmp, because the script is
executed twice instead of once (when suspending and when resuming)
* remove the locking/unlocking of the critical section and the actual state
change, since that is handled by systemd-suspend now
Also, add a different standby script for when systemd is enabled. Said script
acts as a wrapper for systemd's suspend mechanism.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Since poky commit b6fbb3f3d4d6367b0fd7921078f67057551c7ede
reboot config was moved to init.cfg to provide this configuration
when busybox is selected as the init manager, however it is needed
for initramfs images where no init manager is set (see poky commit
ef4a417ab04779bd9fc8a6540a20cca7d14e98cf).
https://jira.digi.com/browse/DEL-6451
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The defconfig file has been refreshed for the current busybox
version 1.29.2 maintaining the same applets enabled.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This script was added a long time ago and it never gets used anymore, so remove
it from our images.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The defconfig file has been refreshed for the current busybox
version 1.27.x maintaining the same applets enabled.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Currently, it isn't possible to wake up the ccimx8x after suspending to RAM.
For now, use the less strict "freeze" low power mode instead.
https://jira.digi.com/browse/DEL-6148
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The suspend script has conflicts with the suspend from bash, then
we decided to rename our custom suspend script to standby and create
a symlink called suspend to maintain backward compatibility.
https://jira.digi.com/browse/DEL-5622
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Sync defconfig to enable command 'chvt' because the xserver-nodm
init script requires this command in the stop process to swicth
the foreground virtual terminal after stopping the xserver.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Sync defconfig to enable command 'command' because /etc/profile
of base-files requires this command to be available. If it is not
available the following message is output during login on a image
using busybox.
-sh: command: not found
(From OE-Core rev: e41c90b852167bbcb434da57b84280e855acae33)
https://jira.digi.com/browse/DEL-5632
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
NetworkManager was experiencing an unexpected behavior managing
the network interfaces on a supend/resume process, then to avoid
this undesired behavior the suspend script will stop and restart
the NetworkManager service.
https://jira.digi.com/browse/DEL-5351
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
NetworkManager will be restarted on the suspend script so this workaround is not needed
This reverts commit b3ae030fce.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
With these changes we tell NM to not manage the wireless interfaces before
unloading the wireless module. This was causing some unexpected behavior that
crashed NetworkManager.
Signed-off-by: Sebastian Pastor <sebastian.pastor@digi.com>
https://jira.digi.com/browse/DEL-5351https://jira.digi.com/browse/DEL-4571
The supplicant support for a bridge was not being managed,
then the bridge was failing when the softap was configured
with an encryption. With this change we launch a supplicant
instance with the bridge support after checking that the
/etc/network/interfaces contains the required parameters.
https://jira.digi.com/browse/DEL-4454
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Busybox's init enabled at build time collide with 'sysvinit' package.
This does not seem a problem when using RPM package manager, but using
IPK instead, the build is broken at image creation time:
Collected errors:
* check_data_file_clashes: Package sysvinit wants to install file <...>/rcS
But that file is already provided by package * busybox
https://jira.digi.com/browse/DEL-4573
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
No applet has been enabled or disabled, just the defconfig file has been
refreshed for the current busybox version 1.24.x
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Now the suspend script brings down all the wireless interfaces that are
managed by ifupdown command (in the '/etc/network/interfaces' file) and
then unloads the wireless driver.
On resume the script triggers an event so udev reloads the wireless
driver and then brings up the interfaces that were brought down on
suspend.
https://jira.digi.com/browse/DEL-4288
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
- The Bluetooth daemon was always executed before setting up the
hardware, generating several problems specifically in the CCIMX6SBC.
This was causing the Bluetooth driver to override the Bluetooth name
and alias, as well as avoiding any host function on Bluetooth profiles.
Only pairing and ping was working, as well as client profile sides.
- This change also fixes some issues in the CCIMX6UL platforms with the
Bluetooth daemon failing to perform several bluetoothctl operations.
https://jira.digi.com/browse/DEL-4000https://jira.digi.com/browse/DEL-4015
Signed-off-by: David Escalona <david.escalona@digi.com>
udhcpc's '-n' option means 'Exit if lease is not obtained'.
We want to keep udhcp client alive if lease is not obtained, so when it is
possible, an IP is assigned.
https://jira.digi.com/browse/DEL-3821
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
The flash_eraseall busybox utility is not used in the ccimx6 and ccimx6ul
platforms. Its corresponding patch (and the library it depends on) can be
removed from the busybox recipe.
https://jira.digi.com/browse/DEL-1320
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Add critical section in suspend script to avoid that more than
one instance can be executed concurrently. This happens, for
instance, when the power button key is pressed while the system
is resuming, causing issues on the wifi interface.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3694
Add critical section in suspend script to avoid that more than
one instance can be executed concurrently. This happens, for
instance, when the power button key is pressed while the system
is resumming, causing issues on the wifi interface.
https://jira.digi.com/browse/DEL-3431
Signed-off-by: Pedro Perez de Heredia <pedro.perez@digi.com>
Bringing the Bluetooth interface down and up during suspend
is not needed and it even showed problems on the Starter Board
where the Bluetooth interface does not come up again after
having been brought down in suspend.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3416https://jira.digi.com/browse/DEL-3081
Remove preventive delays during the removal of Bluetooth and Wireless
interfaces. Tests revealed they are not needed.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The loading of the wireless module without proper arguments does nothing.
Besides, if the interface was down before going to suspend, there is no
need for the wireless module to be loaded.
The wireless module will be loaded nevertheless (with proper arguments)
when the interface is brought up.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3241
The suspend script was unloading the wireless module driver *only* if the
interface 'wlan0' was previously up. If the interface is down the module
does not unload and the system fails to suspend.
This patch removes the module always if it appears in the list of loaded
modules.
While on it, move the unloading of wireless after the unloading of
Bluetooth, to be in line with the reversed order in which they are loaded
on the resume_interfaces() call.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3241
Down the bluetooth interface before entering suspend and up it after resuming
if it is present and up.
https://jira.digi.com/browse/DEL-2806
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Start syslog earlier (from 20 to 02) so it is running and other init scripts
can use it to log into the system like the S03networking script.
https://jira.digi.com/browse/DEL-2812
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
It has been observed that the wireless interface ocassionally fails to resume
from suspend on extensive long run validation testing, so we workaround it by
bringing the interface down before suspend and bring it up again after resume
This reverts commit a77cd1406d.
https://jira.digi.com/browse/DEL-2217
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
We switch to the way it works in Android, short press (<2s) takes the target
to suspend and long press, >2s but <9s, performs a software controlled
power down.
Pressing longer than 9 seconds does the uncontrolled hardware power off
directly from the PMIC.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The suspend script did a ifup/ifdown on wlan0 to workaround issues we
had using wireless drivers on some platforms.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Javier Viguera
Gabriel Valcazar
Arturo Buzarra
Hector Palacios
Sebastian Pastor
David Escalona
Tatiana Leon
Mike Engel
Pedro Perez de Heredia
Isaac Hermida
Alex Gonzalez