meta-fsl-arm is no longer used for Morty release. Now the community
support is implemented in 'meta-freescale' layer.
https://jira.digi.com/browse/DEL-3451
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These new US and world board data files contain new calibration settings
updated with the latest certification results.
md5sums:
bdwlan30_US.bin: f2c414adb682a8cd95e72593fad7fa08
bdwlan30_World.bin: 12e2bae1a871e2a3dfa6ded0ee675c09
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Tweaked to maintain the u-boot and linux revisions to AUTOREV instead of
the fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Protect the invocation of the _scan_done() callback function with the
global lock to avoid that it is called while the module is being unloaded
and the data structures have been freed.
Additionally, the commit also adds a patch to reduce the log level of the
driver that is logging some annoying messages.
https://jira.digi.com/browse/DEL-3607https://jira.digi.com/browse/DEL-3393
Signed-off-by: Pedro Perez de Heredia <pedro.perez@digi.com>
Refresh the patches with GIT so they apply cleanly using "git am".
Otherwise they fail with:
Applying: openssl_helper: use /dev/urandom as seed source
error: corrupt patch at line 16
Patch failed at 0003 openssl_helper: use /dev/urandom as seed source
Applying: hab4_pki_tree.sh: usa a random password for the default PKI generation
warning: keys/hab4_pki_tree.sh has type 100755, expected 100644
Notice that they were not failing in Yocto, as it does not use "git am"
to apply patches, but it's better to have the patches correctly done.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
On a CC6, the 'env default -a' command deletes the 'soc_family' variable
that is used on the U-Boot boot scripts to configure the name of the
device tree file to load.
Then if we try to boot into recovery directly (without a reset) because
the variable is not available, it fails to compose the correct name for
the fdt, and gives the error:
reading uImage--ccimx6sbc-id129.dtb
** Unable to read file uImage--ccimx6sbc-id129.dtb **
Force a reset, so the 'soc_family' variable is available again and the
correct fdt_file is loaded.
While on it, add some blank lines to the 'recovery reboot' message, so
it's easier to read.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The caam encryption check was only done from fw_env_write and fw_env_read
functions, which are not called when using the functions exported as a library.
Move the check_caam_encryption() call to fw_env_open(), which is called from
all code paths. A similar check for AES encryption cannot be moved because it
requires the AES key as an argument.
https://jira.digi.com/browse/DEL-3616
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
NAND partitions may have pre-existing UBI volume information
and that will tell U-Boot to use 'ubiwrite' to keep UBI wear
leveling information instead of erasing the NAND partition
beforehand. Given that the UBI support in U-Boot is not
particularly complete and stable, and specially if the NAND
partition table has been changed, this could result into
problems during the UBI volume initialization or during the
update process. To prevent such problems it is better that
the NAND partitions are erased.
This loses the UBI wear leveling information but provides
a more reliable deployment install script.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-718
Modify patch to clean compiler warning:
warning: passing argument 1 of 'sysfs_mmcboot_set_protection' discards
'const' qualifier from pointer target type
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove the commit that removes the p2p0 interface at boot. This interface
is the one used to establish p2p connections. Configuring the wlan0 command
for p2p does not work.
https://jira.digi.com/browse/DEL-3390
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The qualcomm wlan driver creates two interfaces at load time, wlan0 and
p2p0. Both of them should load the module if not already loaded.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This commit adds a wpa supplicant P2P configuration file and configures
the p2p0 interface automatically at pre-up.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Even though this variable is documented as unused, removing it fails
wireless regression tests.
https://jira.digi.com/browse/DEL-3501
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This re-enables USB mass storage support that was unintentionally
removed in commit 6851ab23e4.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-713
The dependence on virtual/kernel is added implicitly through the module
class, so there is no need to add it explicitly.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This updates the kernel configuration to the latest one
which disables unused drivers and options to optimize the
kernel size.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The following document,
JQCA61x4, QCA65x4, and QCA937x
Configuration Parameters Specification
80-Y7674-11 Rev. J
September 30, 2016
Contains a list of unused configuration arguments in page 29. This commit
removes those listed arguments that appeared on the default configuration
file to avoid confusion.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Otherwise the module is built with debug as that is the Makefile's
default.
https://jira.digi.com/browse/DEL-3392
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Implements functions to get and set variables from U-Boot's environment.
https://jira.digi.com/browse/DEL-3358
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These have been provided by the embedded hardware team and they are to
be used for certification testing. The calibration corresponds to the
internal antenna on the module. If using the current external antenna on the
CC6UL SBC they work fine, although they could be tweaked to improve.
The BDF files provided were generated from the original ones, by running a
test tree for output power calibration for QCA6564A-3 chip. This test
tree is called
‘FCCSP_Rome3.x_WLAN_CLPC_cal_and_WLAN_BT_Verify_Y8611-H341.xtt’ and it
belongs to the Qualcomm Design Package ‘DP25-WL420-100’.
The test tree is to be run in the QSPR software tool, part of the QDART
software tools set provided by Qualcomm.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
As discovered during certifications preparation work, calibration changes
applied only on the bdwlan30.bin file do not take effect.
Per QCA guidelines, the bdwlan30.bin and utfbd30.bin files should be the
same for the calibration changes to work.
This commit removes the current utfbd30.bin file, with an md5sum that
matches the original bdwlan30.bin file in QCA's chipcode
qca6564-le-1-0-3_qca_device repository, and creates a symbolic link to the
actual bdwlan30.bin board file used to certify Digi's module internal
antenna.
https://jira.digi.com/browse/DEL-3454
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The codec MAX98088 present on the ccimx6ulsbc only needs one
configuration file that can play and record.
The default file enables the interfaces present on the ccimx6ulsbc:
- Headphones
- Speaker
- LineOut (in stereo mode)
- LineIN-A
- MIC2
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2352
Javier Viguera
Alex Gonzalez
Mike Engel
Pedro Perez de Heredia
Alejandro Navarro
Diaz de Grenu, Jose
Hector Palacios
David Escalona