Check that weston-start exists before modifying it: after a recent change in
poky's weston-init recipe, this file only gets installed in non-systemd images.
Remove hardcoded systemd service path: some of the code ported from
meta-st-openstlinux assumes that the original weston-init systemd services are
installed under /lib, and it uses hardcoded paths to detect them. Yocto 5.0 now
has usrmerge enabled, so the services are installed in /usr/lib instead,
causing the check to fail. Replace the hardcoded path with its respective
variable.
https://onedigi.atlassian.net/browse/DEL-9011https://onedigi.atlassian.net/browse/DEL-9045
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The SCP firmware introduces too much verbosity (with
timestamp included) in the middle of the boot log
between the TF-A and U-Boot.
Reduce the log and remove compiler flags for errors
on unused variables (banner strings).
This removes the following messages from SCP firmware:
[ 0.000000] SCP-firmware v2.12.0-dev
[ 0.000000]
[ 0.000000] [FWK] Module initialization complete!
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
ST_OPTEE_DEBUG_TRACE is set to 0 if ST_DEBUG_TRACE is set to 0.
However, on the optee source code, if ST_OPTEE_DEBUG_TRACE=0 the
log level is automatically set to 3 (INFO) resulting in a very
verbose optee log.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
DEY generates the ccmp25 boot artifacts on subdirectories of the main
deploy folder. The firmware installation script expects to have them on
the deploy directory, so create the proper symlinks.
https://onedigi.atlassian.net/browse/DEL-9120
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add support based on STM release openstlinux-6.1-yocto-mickledore-mpu-v24.06.26.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add open-source implementation of the OpenGL API support based on v23.0.3
version from STM release openstlinux-6.1-yocto-mickledore-mpu-v24.06.26.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add GPU support based on v6.4.15 version from STM release
openstlinux-6.1-yocto-mickledore-mpu-v24.06.26.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add support based on v2.8 version from STM release
openstlinux-6.1-yocto-mickledore-mp2-v23.12.06.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add support based on v3.19.0 version from STM release
openstlinux-6.1-yocto-mickledore-mp2-v23.12.06.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
When TrustFence is enabled, use the HUK programmed on the OTP
bits for the ccmp15 platform.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9121
By default, the secure storage path in the REE is "/var/lib/tee". It is
part of the rootfs, and thus, it gets lost on a firmware update.
This commit changes that path to a different partition "/mnt/data/tee"
when Trustfence file-based encryption is enabled.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Optee-client provides the TEE Client API as defined by the GlobalPlatform TEE standard.
It is required to communicate with a Trusted Application (TA) running in a Trusted OS.
https://onedigi.atlassian.net/browse/DEL-8970
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit fixes the set_fip_sign_key() function to match the new keys format
where there is a key_pass file for each key, no longer needing to search with
the key index.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit fixes the set_fip_sign_key() function to match the new keys format
where there is a key_pass file for each key, no longer needing to search with
the key index.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This is an NXP change that reverts a mainline weston commit form v9.0.0, in
which the mouse cursor only gets activated when there is mouse movement. This
change was only being included in the weston v10.0.X i.MX forks.
For platforms that don't use these weston forks (ccimx93 uses the v11.0.X fork
and ccmp15 uses mainline weston), the mouse cursor doesn't load right away when
booting the system, which causes apps that are automatically launched (such as
the LVGL demo) to not register the mouse, rendering said apps unresponsive to
it.
Port NXP's change to all of the weston versions we currently use to avoid this
problem.
https://onedigi.atlassian.net/browse/DEL-8865
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When TrustFence is enabled, the boot artifacts (TFA and FIP)
have a 'signed' suffix. Handle this case so that the correct
symlinks are created and the correct artifacts are put into the
SWU file.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
These binaries are installed in subdirectories by default. The uuu
installer expects to find all binaries on the same folder where the script
is. By creating symlinks, the uuu installer can find all the binaries it
needs directly on the deploy folder.
NOTE: variables in 'for' clauses are intentionally without quotes to skip
whitespaces in them.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
(cherry picked from commit 019deb6313)
These binaries are installed in subdirectories by default. The uuu
installer expects to find all binaries on the same folder where the script
is. By creating symlinks, the uuu installer can find all the binaries it
needs directly on the deploy folder.
NOTE: variables in 'for' clauses are intentionally without quotes to skip
whitespaces in them.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
We will use BOOTDEVICE_LABELS as a means to add 'sdcard'
configuration to TF_A_CONFIG within meta-st-stm32 so there
is no need to have a wrapper variable in meta-digi.
This reverts commit c6f19a099c.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Commit 92969f0c4 ("plat-stm32mp1: Remove CFG_STM32_BSEC_WRITE dependency with
debug configuration OP-TEE") on OP-TEE source code, removed the link between
the BSEC WRITE feature with DEBUG feature, so now by default it is enabled.
This reverts commit 2395378ec4.
https://onedigi.atlassian.net/browse/DEL-8657
Create a new script for the generation of PKI tree for STM platforms
and leave the trustfence-sign-artifact script exclusively for signing.
The new gen-pki script only requires the platform as an argument and the
path to where to save the tree (if it doesn't exist) in
CONFIG_SIGN_KEYS_PATH.
This commit also reverts commit 13c136dbc5 by getting rid of the
trustfence-genpki-native.bb recipe and moving back the PKI generation
functions into trustfence.bbclass. This recipe didn't quite guarantee
that the PKI was generated on time for the recipes that required the
keys to exist, anyway.
Instead, the PKI generation function must be called right after
do_compile() of recipe tf-a-stm32mp to be ready for do_deploy() where
the key is used.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Commit 7cf314ba80 made a weak assignment of TF_A_CONFIG in the machine
config file, so that it could be overriden from conf/local.conf with a
straight assignment. However, this variable already has a weak assignment
on include files for the tf-a-stm32mp recipe, which apparently take
precedence over the machine files.
This commit creates a new variable DEY_TF_A_CONFIG in the machine config,
and then uses a straight assignment of TF_A_CONFIG to the new variable on the
tf-a-stm32mp.bbappend.
This allows users to override the machine default and avoids the STM recipe
weak assignment.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Weston is not launched in read-only filesystem because /home/root
is not a writable path.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Weston is not launched in read-only filesystem because /home/root
is not a writable path.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Gabriel Valcazar
Javier Viguera
Arturo Buzarra
Francisco Gil
Hector Palacios
Isaac Hermida
Mike Engel