* fix arch tune files path in machine config
* update imx-digi-base config file (using as a base the imx-base.inc
config file in 'meta-freescale')
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These variables were originally set in NXP's recipes, but they moved their
definitions to each platform's configuration file. Set the appropriate values
where needed. While at it, replace every mention of the SOC_TARGET variable
with its new name, IMX_BOOT_SOC_TARGET.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Aside from adding the wireless-regdb-static support, this NXP package needs to
be included in the rootfs so the regulatory fw gets loaded in userspace.
https://jira.digi.com/browse/DEL-7133
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Disable all encryption support by default on CC8X and CC8MN platforms so
the default built images can be directly built.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This update is a cosmetic one and removes the RAM frequency from the SCFW
filenames. Reflect this change in the RAM_CONFIGS variable and in the uSD/UUU
installation scripts.
As a result, the imx-boot filenames will no longer have the RAM frequency
either.
https://jira.digi.com/browse/DEL-7096
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Modify the imx-seco recipe so it deploys the B0 and C0 versions of the SECO
firmware, Then, modify the imx-boot recipe so it builds every possible
combination of:
* RAM configuration
* imx-boot target (with and without M4 demos)
* Silicon revision
https://jira.digi.com/browse/DEL-7069
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This allows to generalize the code instead of needing to replicate
overrides for each platform that contains the MCA.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The variable BT_DEVICE_NAME is used to name the Bluetooth device name on
the BlueZ configuration file. Re-use the contents of DIGI_FAMILY (except
for ccimx6qp which re-writes it) to simplify platform definitions.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
- WLAN_P2P_INTERFACE is the same for all platforms: "p2p0".
- WLAN_P2P_DEVICE_NAME can be built out of ${DIGI_FAMILY} except for
the ccimx6qp, that's why it has a weak default assignment.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Environment encryption is not yet supported in U-Boot.
Unset TRUSTFENCE_ENCRYPT_ENVIRONMENT on the machine configuration
and remove the platform conditional on the class.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
* prefix TRUSTFENCE_ to variable SIGN_MODE for DEY
* prefix CONFIG_ to variable SIGN_MODE for script
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
WPA and P2P configuration files are basically the same between all
platforms, so we remove all duplicated files to use a common file
and modify it in the recipe logic.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
A variable called IMAGE_BOOTLOADER was being used without distinction for
referring to two different things:
- the recipe that builds the bootable artifacts
- the prefix of those artifacts
The value of this is "u-boot" for most platforms, but "imx-boot" for the
CC8X based platforms.
The name of the variable is misleading, so this commit splits it into two:
- BOOTLOADER_IMAGE_RECIPE, to refer to the recipe
- UBOOT_PREFIX, to refer to the prefix of the bootable artifact
With the separation, the variable UBOOT_SYMLINK becomes a generic formed
one, so it is moved to digi-defaults.inc.
While on it, fix the image_types_digi.bbclass which was not making use of
the original variable to establish all the dependencies.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Similar to the way the u-boot recipe does, create a symlink to the default
bootable artifact.
Since they are overwritten on every loop, this requires that the default
RAM configuration is set the last on the list of RAM_CONFIGS (same
convention than the one used on UBOOT_CONFIGS).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
This recipe adds a script and a related systemd service that
configures two GPIOs (user defined, or else platform-defaults) as
output and sets them to the appropriate value for initializing the
XBee socket:
- XBEE_SLEEP_RQ: is set low, for running the XBee
- XBEE_RESET_N: is set low and then high, to reset the XBee
The service triggers on the condition that the UART TTY device node
pointed to by variable XBEE_UART exists.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6366
In Yocto 2.6, this variable is null whenever systemd is enabled. Explicitly set
this variable to keep some necessary scripts in /etc/init.d.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also, remove sysvinit and add pam, which is needed by weston+systemd.
https://jira.digi.com/browse/DEL-6415
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
cryptoauth-openssl-engine is not compatible with OpenSSL v1.1.x, until
it will be supported, we disable it.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The SDMA firmware does no longer live inside the kernel tree.
It must now be installed on the rootfs.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6420
Since we were modifying UBOOT_SYMLINK for the ccimx8x, we were generating
u-boot symlinks with imx-boot names. This also caused the imx-boot recipe to
fail during compilation, because it couldn't find the old UBOOT_SYMLINK that
we replaced.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also add gtk3+ and clutter demos that depend on wayland since they are also
included in NXP's images.
https://jira.digi.com/browse/DEL-6104
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This package includes applications to:
- Update the MCA firmware
- Manage different MCA settings
- Configure the tamper settings
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This package is the combination of U-Boot and the other i.MX firmware binaries.
In our case, these binaries are: the SCFW, the ATF and the DCD.
The recipe has been ported from the meta-fsl-bsp-release repo, with a couple of
important changes:
* Support for our platform (based on the mx8qxpa0, which uses A0-specific
parameters for mkimage and appends the DCD explicitly)
* Support for multiple UBOOT_CONFIG values (NXP only uses one UBOOT_CONFIG
string per platform; so the compile, install and deploy functions had to
be tweaked to build both 1GB and 2GB variants for our platform).
Our DCD patch used in imx-mkimage is also used, since both packages share the
same repo and imx-boot is the one responsible for generating the final,
bootable image.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
U-Boot's 'dboot' command now supports uncompressing Image.gz.
This will be the default kernel image type for the CC8X.
This also changes the names of the device tree artifacts, that must be
updated on the boot script. While on it, add support for all the SOM
variants (wireless and non-wireless).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
- This is an AARCH64 platform that requires to build "Image", so let's
change KERNEL_IMAGETYPE to a weak assignment in imx-digi-base.inc
- The device tree is inside a vendor folder.
- For the moment, this platform builds from a different branch.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5936
Javier Viguera
Gabriel Valcazar
Hector Palacios
Gonzalo Ruiz
Arturo Buzarra
Mike Engel