Update the recipes to v8.14. NXP changed the mechanism used to load the sdma
and regulatory firmware (they now use firmwared), so remove our ccimx8mm sdma
fw service for now and see if we need a similar workaround with the new
mechanism.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Digi Embedded Yocto 3.2-r2.2
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The AHAB decryption process takes the encrypted file from the address defined
in U-Boot and decrypts it into the address defined in this script. If both
addresses are the same, the decryption process ends up failing. This
happens even for signed-only images.
Maintain the original addresses in this script so they do not collide.
This reverts commit c970d87d5a.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
If IMAGE_FEATURE 'read-only-rootfs' is active, the rootfs image
will be SQUASHFS.
Remove other root file system images, such as ext4, ubifs, sdcard.gz
to avoid confusion and use by install scripts.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
U-Boot uses partition names instead of partition indexes for the nand devices.
This commit syncs the boot scripts with the new dualboot variables.
https://onedigi.atlassian.net/browse/CC6UL-1254
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
These folders /mnt/linux, /mnt/update and /mnt/data are
created by the automount_block.sh script. In a read only
system, these folders are not created raising some errors.
Creating these folders solves the issue.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Create this symbolics links in build time instead of doing it
in run-time. This simplifies the system and allows it to work
with read only filesystems.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Before this patch the MAC addresses were read from the device
tree in the qualcomm.sh script executed at init, and a creates
a file where the MAC where located.
In 0a92f5d9e8df644de74e74f152ed6ff3dd8d3369 in the qca driver
the support to read these MAC addresses from the filesystem
was added.
This commits creates the simbolic link between the device tree
and the expected path where the MAC addresses where located, and
gets rid of the file with the MAC addresses.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
mkimage logs are required for signature on CC8X and CC8M platforms. Create a
copy in the 'imx-boot-tools' deploy directory so a prebuilt imx-boot file can
be later signed using the standalone signature procedure.
Build the 'print_fit_hab' target unconditionally so the log is available for
future standalone signature processes.
Also, use 'CONFIG_MKIMAGE_LOG_PATH' and 'CONFIG_FIT_HAB_LOG_PATH' variables to
point to the logs before calling the sign scripts. We no longer require
creating a symbolic link of the log files.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This change was accidentally reverted when merging to dey-3.2/maint, causing
the qualcomm module to be missing in the rootfs.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
By default, all platforms except ccimx6qpsbc work at 400 kHz on the i2c bus
connected to the ATECC508A crypto chip.
https://onedigi.atlassian.net/browse/DEL-7727
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Re-use RAMDISK address for authenticating the rootfs instead
of allocating a new address (if authenticating a rootfs, we're
not using a ramdisk).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Add missing call to 'uuu' and erase the partition before creating
the UBI volumes.
Also add larger timeouts to erase operations.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The config file /etc/fw_env.config is generated dynamically basing on
the partition table and, in the case of NAND-based SOMs, on the NAND
geometry. This is done on a postinst script that modifies the file on the
first boot of the target. Since this is not allowed on read-only-rootfs,
this commit adds a default fw_env.config file to use instead when
read-only-rootfs is enabled.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-7708
This allows the packages to be included in the ccimx6sbc images. While at it,
include the Qualcomm bluez patches in ccimx6 builds. These patches aren't
destructive, they simply add functionality required by the Qualcomm chip, so
they shouldn't have any secondary effects when using the Atheros chip.
https://onedigi.atlassian.net/browse/DEL-7661https://onedigi.atlassian.net/browse/DEL-7666
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Other layers, such as meta-digi-dualboot, may add scripts to this
list on their layer.conf file. Depending on the order and priority
of layers, using a strict '=' here completely overrides previous
values, which is not desired.
Reported-by: Francisco Gil <francisco.gilmartinez@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
- Add the '-m' parameter. Without it, the script doesn't
generate the output merged configuration file, and the
fragments are not applied.
- Fix the if condition. The '*.cfg' expands to a list of
files, but the '-f' only admits one parameter. Use instead
the Python find_cfgs() function.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The variable 'dualboot' (and 'singlemtdsys' for CC6UL) was restored
after the bootcmd that runs the first time after programming U-Boot runs
fastboot again to resume the script.
This is ok for the CC6UL but not for the rest of platforms, that run the
partition script on the bootcmd, *before* running fastboot.
Restore the variables for all platforms in the bootcmd right after
resetting the environment.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
U-Boot has embedded support to handle bootcount tries.
When the limit of tries is reached, U-Boot runs the script
in `altbootcmd` rather than the usual `bootcmd`.
This other script resides on meta-digi-dualboot layer.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Ensure stdout redirection to the USB interface is removed in every case.
Otherwise, it would be left redirected when INSTALL_UBOOT_FILENAME is
manually set.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Install scripts may rework the partition table basing on the value of
env variables. Information of UBI volumes may remain on the NAND that
could later not correspond to the new partition table.
Make sure the MTD partitions are erased prior to updating:
- For Multi-MTD, append '-e' option to the update command.
- For Single-MTD, erase the system partition.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Check the status of 'dualboot' env variable.
If set to "yes", use the dualboot partition table in the script and
restore the variable (default is "no") after resetting the environment.
Also, for dualboot, there's no need to wipe the recovery partition or
boot into recovery mode.
For dualboot, this script programs both systems A and B with the same
images.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-7649
Gabriel Valcazar
Ariel D'Alessandro
Gonzalo Ruiz
Arturo Buzarra
Francisco Gil
Mike Engel
Hector Palacios
Javier Viguera