This commit allows to mount only the linux partition active in read-only mode.
https://onedigi.atlassian.net/browse/DEL-8193
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
According to udev documentation running programs that access to mount/umount
filesystems is not allowed due to the default sandbox that is enforced on
systemd-udevd.service, so on systemd systems we must to use systemd-mount
binary instead of mount. Also systemd-mount does not support mount ubi devices
by volume name, so we need to use the absolute device path.
https://onedigi.atlassian.net/browse/DEL-8193
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds the extra machine specific configuration files for udev on
ccmp1 platforms to allow, for example, automount storage devices.
https://onedigi.atlassian.net/browse/DEL-8193
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit changes the arm-trusted-firmware build configuration to only build
one ATF artifact.
It will create an image that boot over USB and NAND.
https://onedigi.atlassian.net/browse/DEL-8187
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
By default ccmp1 platforms have dualboot mode by default, however the required
boot script was added to ccmp15 platform only, so this commit fixes it.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The first time the 'dualboot' variable is tested it is directly run in
the script and doesn't need to escape the special characters.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
When Dual Boot is not enabled, 'rootfsvol' variable must point to the
single boot system rootfs partition 'rootfs'.
Explicitly set this value. Otherwise the script relays on the default
rootfsvol value, which may be a Dual Boot partition.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
meta-freescale updated the base recipe and that broke the build:
ERROR: No recipes in default available for:
meta-digi-arm/dynamic-layers/freescale-layer/recipes-bsp/firmware-imx/firmware-imx_8.16.bbappend
The differences in our bbappend are simple enough that we can make a
version agnostic bbappend.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Set 'UBOOT_HAS_FASTBOOT=true' on CCMP1 platforms and therefore add the
UUU installation script to the installer ZIP file.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
For platforms with a FIP artifact, ignore U-Boot artifacts and instead
add to the installer zip file the FIP artifact and the ATF artifacts.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
- create dualboot.bbclass that
- sets DUALBOOT_ENABLED variable
- defines partition names and function for changing the sw-description
for swupdate
- move files from layer into meta-digi
https://onedigi.atlassian.net/browse/DEL-7962
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
On the CCMP1 SOMs, we only consider a single system partition called UBI,
with many UBI volumes.
The variable 'singlemtdsys' allowed to change between this and
a system with multiple MTD partitions with one UBI volume each
(old approach on CC6UL).
This commit removes the variable and uses the logic as if it was set.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Use the latest 2AE NVRAM file from the master branch. This file improves
the EVM performance for the 2AE murata module.
MD5SUM:
- cyfmac4373-sdio.2AE.txt: 6301804650847946c79797387eda9c7a
https://onedigi.atlassian.net/browse/DEL-7936
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Add extra configuration 'CFG_STM32_BSEC_WRITE=y' to the make line to
enable OTP write support.
https://onedigi.atlassian.net/browse/DEL-8074
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
These are available in 'meta-freescale'.
The only difference is that meta-freescale's recipes deletes de SDMA
firmware so the generic one provided by linux-firmware package is used.
We create a minimal bbappend to use the NXP provided SDMA firmware.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also clean some dead code: libjpeg-turbo is the only jpeg implementation
in poky since long ago. Also "remove-libtool" is enabled by default in
bitbake so there is no need to do it in our distro configuration.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit adds Bluetooth Vulnerability CVE-2019-9506
resolution to the firmware file.
CVE-2019-9506 is a Bluetooth key negotiation vulnerability.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://onedigi.atlassian.net/browse/DEL-7134
Co-authored-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The qualcomm.sh script has been losing functionality over time, to the
point that now is just loading the kernel module using 'modprobe'.
Instead, run modprobe directly from the udev rule and get rid of the
qualcomm script.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Reset the FW files to release r00006.3.470144.2a
Verbatim copy of the recipes in DEY-3.2, using command:
git restore -s dey-3.2/master -- meta-digi-arm/recipes-bsp/firmware-qualcomm
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Verbatim copy of the recipes in DEY-3.2, using command:
git restore -s dey-3.2/master -- meta-digi-arm/recipes-kernel/kernel-module-qualcomm
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Explicitly set this variable to keep some necessary scripts in /etc/init.d and
set a "softer" assignment to allow override it.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Arturo Buzarra
Mike Engel
Gonzalo Ruiz
Francisco Gil
Javier Viguera
Hector Palacios
Isaac Hermida