ALSA_LIST variable is weakly set through an override (stm32mp1common or
stm32mp2common). When the override is in place, the hard assignment of
the plain variable is not enough, and the value weakly set in
meta-st-stm32mp layer takes precedence over the plain variable hard
assignment.
Clear the variable with the override and move it from machine config files
to the include file.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Move BOOTSCHEME_LABELS from common include to platform config
Default to:
- 'opteemin' for ccmp15
- 'optee' for ccmp13
This doesn't change the behavior present in DEY-4.0, where OPTEE in ccmp15
was minimal and running on non-secure DDR.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This override sets other variables, such as STM32MP_SOC_NAME which is used
on the build of the FIP image.
It also makes ST layer append a new UBOOT_CONFIG (default_stm32mp15/13)
that we must remove.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
On the new BSP the configuration is called 'optee-nand' and the build
parameters have changed.
We do this override in meta-digi only to incorporate
`STM32MP_USB_PROGRAMMER=1`
parameter, which allows to boot the nand image from USB, too.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The function had into account the memory variants when copying U-Boot
device trees, but not the U-Boot binaries themselves.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit removes kernel headers from the SDK package list to
prevent overwriting the default ones, as there are currently no
ST-specific headers required.
Reference: ebadb27d60
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
When a WiFi card adds additional interfaces (for AP or WiFi direct),
it generates udev triggers that lead the wifi card to fail.
Ignore those events.
The reason of this new behavior is due to poky commit 1e8b49999ad8.
https://onedigi.atlassian.net/browse/DEL-9600
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Configure the FIT_CONF_DEFAULT_DTB in the machine settings to define the
default configuration for the generated FIT image.
https://onedigi.atlassian.net/browse/DEL-9595
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit updates the tarball to be based on libteec v1.0.0, as the previous
version was generated without the correct Trusted Application (TA) and did not
work properly.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit introduces a dynamic layer that extends the flutter-apps layer by
adding an init service to automatically launch the Flutter demo on boot.
https://onedigi.atlassian.net/browse/DEL-9380
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
STM patch nº8 was causing memory mapping errors when playing .flv videos on the
ccmp25-dvk, so revert it.
https://onedigi.atlassian.net/browse/DEL-9466
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit introduces the necessary changes in the Digi Embedded Yocto layer
to support the X-LINUX-AI v6.0.1 software package from the meta-st-x-linux-ai
layer.
The update removes support that is now provided directly by the ST layer in
this new version and adapts existing recipes to align with the updated
mechanisms for AI application integration. These changes ensure compatibility
with platforms that feature hardware acceleration (NPU), as well as those that
rely solely on CPU-based inference.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Typically, recipes that support clang builds only pull in the required clang
dependencies when the TOOLCHAIN variable is expliciltly set to "clang". The
qttools recipe in meta-qt6 differs from this by adding the dependency as soon
as meta-clang is present in the bblayers, regardless of the selected toolchain.
This causes all of the nativesdk clang packages to get included in our SDK
(along with the gcc ones), causing SDK bloat and spurious build errors on build
machines with limited resources.
Make sure that the dependency is only added when the clang TOOLCHAIN is
explicitly selected.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Enable CONFIG_BPF_SYSCALL and CONFIG_CGROUP_BPF when using docker, as it
is needed for a correct network interoperability.
Some kernels may have it enabled by default, but others not, so just enable
it for any platform.
https://onedigi.atlassian.net/browse/DEL-9592
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Enable CONFIG_BPF_SYSCALL and CONFIG_CGROUP_BPF when using docker, as it
is needed for a correct network interoperability.
Some kernels may have it enabled by default, but others not, so just enable
it for any platform.
https://onedigi.atlassian.net/browse/DEL-9592
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This commit introduces the necessary changes in the Digi Embedded Yocto layer
to support the X-LINUX-AI v6.0.1 software package from the meta-st-x-linux-ai
layer.
The update removes support that is now provided directly by the ST layer in
this new version and adapts existing recipes to align with the updated
mechanisms for AI application integration. These changes ensure compatibility
with platforms that feature hardware acceleration (NPU), as well as those that
rely solely on CPU-based inference.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The release build should ensure it starts from a fresh environment to avoid
potential mismatches with old code.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes the default integration of the Flutter framework from the
SDK due to its significant impact on toolchain size, build time, and reliability.
Including Flutter increases the build complexity exponentially, often resulting
in timeouts or failures caused by the large number of recipes involved.
Customers who require Flutter can still enable it manually if needed.
https://onedigi.atlassian.net/browse/DEL-9380
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
* Set the OP-TEE base address to 0x7e000000 (32MiB below the first gigabyte
of DDR).
* Update the ATF and OP-TEE memory maps to support up to 4GiB DDR.
This ensures OP-TEE runs reliably across all ccimx8mm memory configurations.
https://onedigi.atlassian.net/browse/DEL-9502
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Flutter is an open source framework for building multi-platform applications
without a graphical backend running. This commit adds support to create a new
DEY image type based on Flutter ready to use for the users.
https://onedigi.atlassian.net/browse/DEL-9380
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Even though we launch said demo with WebKit's page cache disabled, WebKit still
caches most of the demo's contents for two reasons:
* The demo is browsed using a non-HTTP(S) protocol (file://)
* The demo is contained within the same domain (same-site browsing)
This can lead to unexpected behavior on platforms with small RAM size. Add
a workaround to force WebKit to create a new web process everytime we open
a page on the demo, deleting the previous process and freeing its memory.
An alternative solution would be to alter our demo to make sure a page's
resources are correctly freed when exiting said page, but this provides a
general solution that ensures memory cleanup in all cases, albeit with slightly
longer loading times.
https://onedigi.atlassian.net/browse/DEL-9498
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Add a unique patch with the RT functionality between NXP tags (sha1)
'lf-6.6.36-2.1.0' (d23d64eea5111e1607efcce1d601834fceec92cb)
'Real-Time-Edge-v3.1-202503' (f03af81d60b7ae14e03fafa8f4c4289c30a73f93)
https://onedigi.atlassian.net/browse/DEL-9324
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The btnxpuart is the driver used to manage the bluetooth for our i.mx9
modules, so only specify it for the affected platforms.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The patch was recently added to meta-freescale, remove it from our layer to
avoid build errors.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
(cherry picked from commit 907531b55c)
The patch was recently added to meta-freescale, remove it from our layer to
avoid build errors.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Add UYVY support in order to be aligned with stateful v4l2 codecs
such as v4l2jpegenc.
https://onedigi.atlassian.net/browse/DEL-9546
Change-Id: I8c8e0b328aa3ea2325085d26cad0c14549b25f5a
Reviewed-on: https://gerrit.st.com/c/oeivi/oe/st/meta-opensdk/+/436381
ACI: CITOOLS <MDG-smet-aci-reviews@list.st.com>
Tested-by: Christophe PRIOUZEAU <christophe.priouzeau@st.com>
Reviewed-by: Christophe PRIOUZEAU <christophe.priouzeau@st.com>
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add also BGRA, ARGB, ABGR formats in order to be aligned with stateful
v4l2 codecs such as v4l2jpegenc.
https://onedigi.atlassian.net/browse/DEL-9546
Change-Id: Ia51f7a93b0a6fbccb3222230e9f0936d2293cbbb
Reviewed-on: https://gerrit.st.com/c/oeivi/oe/st/meta-opensdk/+/436379
Reviewed-by: Christophe PRIOUZEAU <christophe.priouzeau@st.com>
ACI: CITOOLS <MDG-smet-aci-reviews@list.st.com>
Tested-by: Christophe PRIOUZEAU <christophe.priouzeau@st.com>
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit conditionally selects the appropriate boot artifacts to include in
the ZIP installer, depending on whether Trustfence is enabled or not.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Both boot artifacts now use the same signed label, so this commit removes
unnecessary logic and updates the UUU install script to support the new boot
artifact naming. It also fixes the detection of signed artifacts by checking
for the presence of the FIP artifact, instead of relying on a U-BOOT artifact
that does not exist on this platform.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit includes a new tarball based on trustfence-fscrypt v0.2,
cross-compiled against libteec v1.0.0, to enable support for STM32MP platforms.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit integrates optee-client support from the meta-st-openstlinux layer,
based on the openstlinux-6.6-yocto-scarthgap-mpu-v25.03.19 tag.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit simplifies the recipe by integrating the symlink generation
directly into the main do_deploy() function, removing the need to maintain
both a do_deploy() and a do_deploy:append().
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Hector Palacios
Isaac Hermida
Javier Viguera
Arturo Buzarra
Gabriel Valcazar
Christophe Priouzeau