The installer uses the regular rootfs filename or falls back to search
for a squashfs (read-only) rootfs image.
The UUU installers of eMMC-based platforms use an if/elif/else structure
to determine which file exist (in order of preference). Replicate this
structure on the rest of platforms and installers.
This avoids printing an error message if the default rootfs does not exist
but the read-only one does.
Also, reset 'rootfstype' variable if the default rootfs file exists, which
allows to install regular images over a previous read-only system.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
When running the installation script on variants with larger NANDs, two of the
script's commands take longer than our intended timeouts under specific
circumstances:
* When the variant has a NAND with 512 MiB or more and singlemtdsys is set
to "yes", running ubivolscipt takes longer than our 10 second timeout.
The larger the NAND storage size, the longer this command takes.
* When the variant has a 1 GiB NAND, singlemtdsys is set to "yes" and
dualboot is set to "no", the update of the recovery UBI volume takes
longer than our 15 second timeout.
In both of these cases, the script fails and the installation process cannot
continue. Apply the following changes to prevent this:
* Increase the ubivolscript timeout from 10 seconds to 30
* Increase the recovery update timeout from 15 seconds to 20
Also, remove the command immediately before ubivolscript is run, since said
command is already being run at the beginning of ubivolscript.
https://onedigi.atlassian.net/browse/DEL-9097
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
There is a corner case that wasn't cover by the script, if you
use the script using a -k -t the "-t" would be the name of the
dek.bin.
This new implementation solves the issue.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Some variables in the script belong to u-boot, not to the shell
running the script. Escape those variables so the shell does not
expand them.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Some minor fixes:
* return error code if installation fails
* cosmetic: update comment with options
* just exit after error and do not execute boolimit command
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
In case a HWID is not set or the variant is unknown, do not set it to a default
U-Boot file but ask the user for the proper file.
This case should not happen, but cover it for safety.
https://onedigi.atlassian.net/browse/DEL-8855
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Use the intention of installing dual boot firmware as a condition to set
bootlimit=3 so that the bootcount mechanism is enabled.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DUB-1058
During firmware install, the target may be reset several times.
We don't want the bootcount to count these as boot attempts.
This was done in a791bb4463 for the ccmp1
but not for the rest of platforms.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
If the default r/w rootfs is not found it will try to do a
fallback to the squashfs image.
In the nand devices additionally we need to set the rootfstype
to squashfs.
https://onedigi.atlassian.net/browse/DEL-8638
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
For the CC6UL 1GB flash variant, the programming of the rootfs exceeds
the current 90 secs timeout, giving following failure:
[Bulk(R):LIBUSB_ERROR_TIMEOUT] fb[-t 90000]: ucmd update rootfs ram ${fastboot_buffer} ${fastboot_bytes} -e
Error: Bulk(R):LIBUSB_ERROR_TIMEOUT
Increase the timeout to prevent the failure.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 16eded4f0edcc603de83be7155f7c09718ba5ddd)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add missing call to 'uuu' and erase the partition before creating
the UBI volumes.
Also add larger timeouts to erase operations.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The variable 'dualboot' (and 'singlemtdsys' for CC6UL) was restored
after the bootcmd that runs the first time after programming U-Boot runs
fastboot again to resume the script.
This is ok for the CC6UL but not for the rest of platforms, that run the
partition script on the bootcmd, *before* running fastboot.
Restore the variables for all platforms in the bootcmd right after
resetting the environment.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Ensure stdout redirection to the USB interface is removed in every case.
Otherwise, it would be left redirected when INSTALL_UBOOT_FILENAME is
manually set.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Install scripts may rework the partition table basing on the value of
env variables. Information of UBI volumes may remain on the NAND that
could later not correspond to the new partition table.
Make sure the MTD partitions are erased prior to updating:
- For Multi-MTD, append '-e' option to the update command.
- For Single-MTD, erase the system partition.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Check the status of 'dualboot' env variable.
If set to "yes", use the dualboot partition table in the script and
restore the variable (default is "no") after resetting the environment.
Also, for dualboot, there's no need to wipe the recovery partition or
boot into recovery mode.
For dualboot, this script programs both systems A and B with the same
images.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-7649
The script required the passing of option '-b' for setting up the
target to use a single MTD partition and multiple UBI volumes.
If a target however already has the variable 'ubisysvols' set to
'yes' but this parameter is forgotten when calling the script, the
partition layout would change to default (several MTD partitions).
Remove the recently added '-b' option and make the script decide
basing on the current value of 'ubisysvols' variable.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
With U-Boot supporting the creation of mtdparts and UBI volumes depending
on the value of variable 'ubisysvols', adapt the install script to make
use of those to generate a partition table and UBI volumes accordingly.
This can be triggered with new option '-b'.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The current syntax only works properly when running the script through bash.
Change this so that it works for other shells as well.
While at it, fix a typo in the message that appears when the variant can't be
detected in the 6UL script.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The install script of cc8x had errors (using double '==' instead
of single on comparisions).
Besides fixing this typo, this commit changes the logic to:
- default to 2GB U-Boot for variants other than the ones in the
list.
- consider variant code 0x00 (not programmed HWID) as a failure.
thus forcing the user to specify the file on the command line.
This second action is done also on the cc6ul script.
Reported-by: Hector Bujanda <hector.bujanda@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
With the generalization done in previous commits, we have now several files
that are identical and can be merged into a common SOM or SOM family
folder.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Hector Palacios
Gabriel Valcazar
Francisco Gil
Mike Engel
Isaac Hermida
Tatiana Leon
Javier Viguera
Gonzalo Ruiz