This commit modifies the cloud connector configuration to use
'remotemanager.digi.com' URL since it does not use certificates for the
connection.
'edp12.devicecloud.com' only allows connections with certificates.
The certificate is downloaded during the first device connection to DRM and
stored in '/etc/ssl/certs' directory inside the 'rootfs' partition.
Following connections must use this certificate.
After a firmware update 'rootfs' partition is re-programmed (standard boot)
or changed to use the corresponding partition of the other block (dual boot). In
any case the certificate downloaded is not available anymore, so the device is
not able to reconnect.
Currently there is no a 'immutable' partition to store the certificate, that is,
a place where the certificate is not removed during a firmware update and can
be used by the cloud connector (similar to the 'data' partition on a ccmp1)
Related to commit 063a946e7c.
https://onedigi.atlassian.net/browse/DEL-8400
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
By launching in system mode it is possible to play music from a shell using
pulseaudio. With change all platforms and images (with or without graphical
support) have pulseaudio working.
https://onedigi.atlassian.net/browse/DEL-8417
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
With platform overrides we need to use ':append' operand. Otherwise, we
are overriding the previous content of the variable and not adding to it.
In this case, for example, we removed some postprocessing functions that
allow SSH into the device with an empty password.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit updates the patch series for wpa-supplicant and hostapd v2.10,
based on the Murata release imx-kirkstone-fafnir_r1.0 that matches with the
Cypress Linux WiFi Driver (FMAC) release v5.15.58-2023_0222
https://onedigi.atlassian.net/browse/DEL-8407
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit creates a new launcher group in the '/etc/xdg/weston/weston.ini' to
have access to the QT cinematicexperience.
This is done for QT5 (ccmp15, ccimx8mm, ccim8mn) and QT6 (ccimx93).
https://onedigi.atlassian.net/browse/DEL-8379
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
ConnectCore 93 DVK only connects the XBee reset line (XBEE_RESET_N_GPIO) but not
the sleep request (XBEE_SLEEP_RQ_GPIO)
It also reworks the 'xbee-init' script to support empty reset
(XBEE_RESET_N_GPIO) or sleep request (XBEE_SLEEP_RQ_GPIO) values.
https://onedigi.atlassian.net/browse/DEL-8375
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
True is the default since long time ago, and thus not necessary. This
follows similar changes done in other layers.
Command used:
sed -e 's|\(d\.getVar \?\)( \?\([^,()]*\), \?True)|\1(\2)|g' -i $(git grep -E 'getVar ?\( ?([^,()]*), ?True\)' | cut -d':' -f1 | sort -u)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
'do_populate_sdk' for dey-image-webkit was not working because of package
nghttp2:
DNF version: 4.11.1
--> Starting dependency resolution
--> Finished dependency resolution
Error:
Problem: package nghttp2-dev-1.47.0-r0.1.cortexa53_crypto requires nghttp2 = 1.47.0-r0.1, but none of the providers can be installed
conflicting requests
nothing provides nghttp2-client >= 1.47.0 needed by nghttp2-1.47.0-r0.1.cortexa53_crypto
nothing provides nghttp2-server >= 1.47.0 needed by nghttp2-1.47.0-r0.1.cortexa53_crypto(try to add '--skip-broken' to skip uninstallable packages)
ERROR: Logfile of failure stored in: proj/ccimx8mm-dvk/tmp/work/ccimx8mm_dvk-dey-linux/dey-image-webkit/1.0-r0/temp/log.do_populate_sdk.2923894
ERROR: Task (dey/4.0/sources/meta-digi/meta-digi-dey/dynamic-layers/webkit/recipes-core/images/dey-image-webkit.bb:do_populate_sdk) failed with exit code '1'
This commit creates a bbapend to allow empty 'nghttp2-client' and
'nghttp2-server' packages because 'nghttp2-dev' depends on 'nghttp2' that
depends on
'${PN}-client (>= ${PV}) ${PN}-proxy (>= ${PV}) ${PN}-server (>= ${PV})' per
the recipe at poky.
https://onedigi.atlassian.net/browse/DEL-8380
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
The SW encryption is much faster than decicated HW in our platforms.
The HW encryption is limited to the use of CAAM which is used through
blob calls, therefore the cryptodev module is not required.
https://onedigi.atlassian.net/browse/DEL-8371
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Packages bluez5-init, cloudconnector, and connectcore-demo-example-webkit
provide a launcher script that is used regardless of the init system being
systemd or sysvinit. Those launcher scripts use the '/etc/init.d/functions'
file, which is provided by the 'initscripts-functions' runtime package,
so add that runtime dependence.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
No functional change, just include poky.conf (which is the base for our
distro) and then remove all the code that is duplicated.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit adds a custom config file to handle the KEY_POWER events on systemd.
https://onedigi.atlassian.net/browse/DEL-8207
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This custom config file applies not only the NXP platforms so this commit
renames it.
https://onedigi.atlassian.net/browse/DEL-8207
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The 'ifupdown' script does not allow to disconnect a network interface on
purpose. Once it is down, the script will reconnect it again.
This commit adds a configuration section inside 'NetworkManager.conf' to be able
to manage this behavior. By default, it is disabled.
https://onedigi.atlassian.net/browse/DEL-8342
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
On boot, ConnectCore 6UL was failing to start pulse audio since it was trying
to use journalctl as log target when systemd is not included.
Boot error:
Starting Dropbear SSH server: dropbear.
W: [pulseaudio] main.c: This program is not intended to be run as root (unless --system is specified).
E: [pulseaudio] log.c: Invalid log target.
E: [pulseaudio] cmdline.c: Invalid log target: use either 'syslog', 'stderr' or 'auto' or a valid file name 'file:<path>', 'newfile:<path>'.
E: [pulseaudio] main.c: Failed to parse command line.
Starting bluetooth: bluetoothd.
While on it change the 'connectcore-demo-server' priority to be launched after
pulseaudio when not using systemd.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
Move 'video-examples' and 'webglsamples' recipes outside dynamic-layers/webkit
so platforms without 'webkit' support (such as ConnectCore 6UL) are able to
include and build successfully the complete 'connectcore-demo-example'
Related to 0b9b73afc8
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
This commit includes by default several Qt applications to show the graphical
capabilities of the CCMP15 platform.
https://onedigi.atlassian.net/browse/DEL-8254
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
We need some of the extra gstreamer packages added via
MACHINE_GSTREAMER_1_0_EXTRA_INSTALL for the ccimx93, but as the ccimx93
does not have an 'imxgpu' override, they don't get added. Instead, add
the packages for all the NXP platforms by removing the override and then
empty the variable for the 'ccimx6ul' for space-saving purposes.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
accel-video was being used only for including or not gstreamer in the
different DEY images. But then we had exceptions to include gstreamer for
machines that do not define accel-video, so just follow what the ccmp15
does, and use a generic 'gstreamer' distro feature to add 'dey-gstreamer'
support to the images.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
MACHINE_GSTREAMER_1_0_PLUGIN should contain the machine-specific gstreamer
plugin to use, but not the rest of the packages to be included in the
rootfs. So clean that variable up, and add the dependent packages in the
dey-gstreamer package group.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Generated webkit rootfs image for the ConnectCore MP15 is too big to fit in a
dual boot system.
This commit redefines 'dey-webkit' packagegroup not to include connectcore
demo multimedia feature in ccmp1 platforms.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
'package-management' allows to install packages in runtime. This feature is not
usually utilize by customers so we are removing this support from all images.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
This commit separates the original 'connectcore-demo-example' package in 3
packages:
1. 'server' package. It contains the 'demoserver.py' script and its
corresponding systemd service and init script.
This script is required for the local demo and to be used with the
Bluetooth application (during the get started process)
2. 'example' package. It contains the html and required resources (images,
javascript, etc.) to use the demo locally, except for the multimedia
resources.
This package depends (in runtime) on the 'server' package.
3. 'multimedia' package. It contains the multimedia html and required
resources (images, javascript, videos, etc.) to use the multimedia demo
features locally.
This package depends (in runtime) on the 'example' package and also on
'video-examples' and 'webglsamples' packages.
This split allows to select the required demo packages per platform and image
type.
By default, the 'multimedia' package is the one included in the webkit images,
but the 'example' package is the one included in the rest of images.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
This commit is similar to those required to launch crank applications on top of
weston in ConnectCore MP 15 platform, it must wait for the socket
'/run/user/0/wayland-1' after weston is initialized.
See commits 7de8270beda64236cdd1c46857906315a37dc4fe and
1ec5cc172c.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
Do not build 'drm' platform for ccmp1 platforms. The code for 'drm' does not
properly build out of the box in cog version 0.14.1 and some patches are
required.
Since 'drm' platform is not being used, remove it for ccmp1 instead of fixing
the build process.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
NXP and ST platforms launches weston in a different way. In ccmp15 we must wait
for the socket at '/run/user/0/wayland-1' after weston is initialized, while
that is not required on NXP platforms.
This commit reverts part of the changes in commit
31d9863fea.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
In order to reduce the final size in the rootfs, this commit removes the
package manager for the core-image-base images.
https://onedigi.atlassian.net/browse/DEL-8335
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Starting at Bluez 5.48, the battery characteristic was moved to the
DBUS org.bluez.Battery1 interface. This causes the device to try to
read information from iOS devices after establishing a connection,
triggering a reverse pairing request. This scenario causes random
disconnects in iOS devices unless a trust agent is registered in the
host to take care of the pairing. Removing the battery plugin at
startup fixes the issue.
Signed-off-by: David Escalona <david.escalona@digi.com>
There is an environment option "COG_PLATFORM_WL_VIEW_FULLSCREEN" for
that purpose, so do not patch the code.
Set that variable to true if you want "cog" to be started in
fullscreen mode.
https://onedigi.atlassian.net/browse/DEL-8356
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Mostly a verbatim copy of the recipes in 'meta-imx' as of release
rel_imx_5.15.71_2.2.0, with a couple of changes:
* packagegroup-qt6-imx.bb renamed to packagegroup-qt6-dey.bb
* removed 'nxp-demo-experience' from packagegroup-qt6-dey.bb as the recipe
lives in a different layer 'meta-nxp-demo-experience' which we currently
don't clone under DEY.
https://onedigi.atlassian.net/browse/DEL-8347
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove the 'qt5-layer' hardcoded dependence for 'digi-dey' and
dynamically get whether QT5 is being used in the project. This is done
with a new class _qt-version.bbclass_ that is able to get that
information from the project.
https://onedigi.atlassian.net/browse/DEL-8347
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Several fixes to the runtime dependences:
* Use new override syntax with ':'
* There is not "dualboot-init" package only "dualboot"
* Delete dependence on trustfence-tool
While on it, define do_configure and do_compile as noexec, because those
tasks do not need to execute, and remove the wrong PACKAGE_ARCH entry
(as this package is arch/machine agnostic)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
For 'wayland' enabled distro features, 'weston' is added as image
feature. This is later used in poky to change the SYSTEMD_DEFAULT_TARGET
to 'graphical.target' which is the correct systemd default target for
graphical images.
This allows to delete the workaround we have in 'weston-init'
recipe to start weston automatically on boot.
Also delete some packages from CORE_IMAGE_EXTRA_INSTALL:
- weston-init and weston-examples are included as part of the 'weston'
image feature.
- gtk+3-demo: removed from the default images, as it is a graphic framework
we are not promoting.
- xterm: removed as weston does already provide a terminal (weston-terminal).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The commits in Digi clone have been merged to the public
libsoc repo.
Adjust the SRCREV to the latest available commit at the moment
(545b354968a9d03008e1e86e14c58e3f8423a20c) and remove the
dependency with Digi clone.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8218
This commit removes unused platform images to reduce the final size in the
rootfs.
https://onedigi.atlassian.net/browse/DEL-8335
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Set the options to false, so user can enable it and see the effect and how
it loads the performance.
Just starting with those options ON leads to a loaded system and the first
impression is too bad.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Update the recipe (using meta-imx's reference) to add support for the
ccimx93 and delete obsolete code.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The class 'boot-artifacts.bbclass' was created to generate a
list of the bootable artifacts that must be copied from the
deploy dir to the installer ZIP file, so that the installer
has all the possible bootloader files to update any variant
of the hardware.
The class was somewhat over-engineered to produce the list,
specially for the cc8x, with the variants of SoC revision,
RAM size and width. With the arrival of ST family, it got
more complex, as the artifacts don't even come from U-Boot
recipe.
To remove complexity, this commit removes the bbclass and
moves the list to the platform config file.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
v4l-utils contains tools to manage the camera.
We have also documented all these commands in our
documentation
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
meta-swupdate updated swupdate to version v2022.12, so we need to update
our bbappend to apply to that version. Otherwise firmware update is
failing due to some missing swupdate handlers.
As our bbappend is generic enough, use a wildcard bbappend so it applies
to all swupdate versions.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
On systems with a single MTD system partition and multiple UBI
volumes, the initramdisk doesn't mount the 'update' partition
because mdev rules only trigger events for MTD partitions.
This commit adds a rule to trigger an event for every /dev/ubi0_x
(every UBI volume on ubi0 device) and call the new automount_ubi.sh
script. The script checks if the volume is called 'update' and if
so, it creates /mnt/update mountpoint and mounts the volume.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8297
(cherry picked from commit df9c622b1bf0a7307c61deda12cf1f67d4f630f0)
(cherry picked from commit 8b8f9560af)
On systems with a single MTD system partition and multiple UBI
volumes, the initramdisk doesn't mount the 'update' partition
because mdev rules only trigger events for MTD partitions.
This commit adds a rule to trigger an event for every /dev/ubi0_x
(every UBI volume on ubi0 device) and call the new automount_ubi.sh
script. The script checks if the volume is called 'update' and if
so, it creates /mnt/update mountpoint and mounts the volume.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8297
(cherry picked from commit df9c622b1bf0a7307c61deda12cf1f67d4f630f0)
This commit removes the on-target post installation function for read-only rootfs,
as it will fail trying to edit files.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
This commit removes the on-target post installation function for read-only rootfs,
as it will fail trying to edit files.
https://onedigi.atlassian.net/browse/DEL-8221
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Change the condition to start after the weston service.
While on it, add a "requires" option given that weston is mandatory to have
the "cog" tool running.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
v4l-utils contains tools to manage the camera.
We have also documented all these commands in our
documentation
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
meta-freescale did another merge of recipe updates that we need to follow
to prevent build failures.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This was incorrectly removed in last commit affecting this recipe. Removing
vulkan config option is needed to prevent a build failure.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The WESTON_SERVICE variable may contain the '@' character. In that case
the sed command fails due to using the same character as separator. To
prevent this problem use a different separator for the sed command.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Native X11 is not supported for ccimx93 (dropped by NXP), so remove
xcomposite-egl and xcomposite-glx packageconfig options.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
All files go to xbee-init package, so by default xbee package is not
created. This leads to a failure when building the SDK:
Error:
Problem: conflicting requests
- nothing provides xbee = 1.0-r0.0 needed by xbee-dev-1.0-r0.0.ccimx8mm_dvk
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Cleaned code comes from older yocto versions (not needed anymore), and is
causing a build failure when building the nativesdk package.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The variable dualboot might not be defined or well have an invalid
value. Just keep the service running if it is a dualboot model.
https://onedigi.atlassian.net/browse/DEL-8264
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Make the script send the resume actions to the background
so that console returns to the user without having to wait
for the Wi-Fi module to load and the Bluetooth to attach.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8262
The following files were duplicated across platforms but were
identical or almost identical.
Only used on SysVinit (currently only by default on the CC6UL).
- standby
- acpid.map
Only used on SystemD
- standby-actions
Notes:
- The triggering of udev actions are harmless if the interfaces
don't exist.
- The value of KEY_POWER on acpid.map for CC6/CC6Plus was originally
0 instead of 1, but this file is not currently used in systemd.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Instead of overriding the whole do_compile function, just to reconfigure
u-boot for Trustfence, create a do_configure pre-function that takes care
of that. This allows the removal of duplicated code.
Also, disable the generation of u-boot environment artifacts. We are
not using them and so many u-boot artifacts in the deploy directory
are confusing.
Finally, adjust the names of the TF u-boot artifacts in the do_deploy
append function.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These are just a verbatim copy of the ccimx8mm ones, so the project is
buildable. This file list should be revisited and adapted for the
ccimx93.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
A new set of meta-freescale updates broke our layer, because they
updated opencv package and our bbappend does not apply anymore.
The build fails at parsing:
ERROR: No recipes in default available for:
meta-digi/meta-digi-dey/dynamic-layers/freescale-layer/recipes-support/opencv/opencv_4.5.2.imx.bbappend
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This package includes the concurrent module required by the XBee library
(to use ThreadPoolExecutor)
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
Add a new parameter '-i' to update-firmware to let the user
select a specific image_set of the sw-description file to
use during the swu update.
This allows adding different image_sets on the sw-description
and reduce the number of images to build. It also adds more
future-proof flexibility.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8199
In previous line we are launching the mdev in daemon mode. One of the
first tasks the daemon mode performs is a cold scan, so there is no need
to repeat it afterwards.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
On recovery based devices, the swupdate process is executed in the
recovery, so there is no need to have the swupdate daemon running on the
rootfs.
Add a on-target post installation script to disable the swupdate
bootscript on the normal rootfs. This has the side effect of failing in
the recovery initramfs because the initramfs does not have a complete
SysV init system. For that case add a rootfs postprocess function to
delete the postinst script.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There is a problem when building the SDK because two binaries
have the same name (update-firmware) and makes the compilation
to fail.
Change the name to update-firmware.recovery and create a wrapper
over the update-firmware to check if the system is not dual boot
to call it.
Rework the code to make it more reliable.
Remove the umount of the alternative linux partition, now it is
not needed because only the active linux partition is mounted now.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Now in the file descriptor we have three different names:
platform, primary and secondary.
Also a link from 'platform' to 'single' to keep backward
compatibility.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
All the dualboot logic will be checked in run time.
To do this:
* Include the altboot.src by default in all the images
* Create a post installation script to change the
firmware_download_path in the cloud connector
* Unify the swupdate file descriptor for dual and single boot
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
This commit modifies the cloud connector configuration to use
'remotemanager.digi.com' URL since it does not use certificates for the
connection.
'edp12.devicecloud.com' only allows connections with certificates.
The certificate is downloaded during the first device connection to DRM and
stored in '/etc/ssl/certs' directory inside the 'rootfs' partition.
Following connections must use this certificate.
After a firmware update 'rootfs' partition is re-programmed (standard boot)
or changed to use the corresponding partition of the other block (dual boot). In
any case the certificate downloaded is not available anymore, so the device is
not able to reconnect.
Currently there is no a 'immutable' partition to store the certificate, that is,
a place where the certificate is not removed during a firmware update and can
be used by the cloud connector (similar to the 'data' partition on a ccmp1)
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
The directory '/etc/ssl/certs' is in the 'rootfs_x' partition for dual boot or
'rootfs' for standard boot. In any case this certificate cannot be used after
updating because it is stored in the other block partition (for dual boot) or
because the whole partition has be re-programmed (for standard boot).
So, after a firmware update the device will not be able to reconnect to DRM
unless the user revokes the certificate.
This commit changes the certificate directory to be '/mnt/data' where 'data'
partition is mounted. This is not erased during a firmware update, so cloud
connector can use the already downloaded certificate and the device is able to
reconnect to DRM.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
As a result of the dualboot support we may end up with two
'update-firmware' commands in the rootfs. To prevent file name clashing,
we may need to install the recovery-utils update-firmware as
update-firmware.recovery, and then the current command mode check would
fail.
Relax the check, by just looking at the first character.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
As we are going to document how to build Crank images using our own recipes, we
need a way for customers to provide the sha256 of the engine and demos tarballs:
* Storyboard Engines are not available as a compressed file, it is a directory
available after the installation of the whole Storyboard software, next to
Storyboard Designer, samples, and other resources. The installer is only
available after filling a form and receiving an email with the link and a
license key valid for 1 month.
To use our 'crank-sbengine_7.2.bb' recipe, users must create the tarball
from this directory and provide its path in the 'CRANK_ENGINE_TARBALL_PATH'
and its sha256 in 'CRANK_ENGINE_TARBALL_SHA256'.
* Regarding Storyboard applications, the included demo in the prebuilt image
is not publicly available, but customers can use the same recipe to install
their own applications.
To use our 'crank-demos_7.2.bb' recipe, users must create a tarball with
the exported application from Storyboard Designer and provide its path in
the 'CRANK_DEMOS_TARBALL_PATH' and its sha256 in
'CRANK_DEMOS_TARBALL_SHA256'.
There are also other configurable parameters such as 'CRANK_DEMO_PATH' or
'CRANK_DEMO_OPTIONS'.
The process of adding support to Crank Storyboard applications will be fully
documented as new topics.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
Since commit 554b97a ("swupdate: Set service type to notify") in meta-swupdate
layer, the swupdate service fails on boot due to the following timeout error:
swupdate.sh[2708]: [TRACE] : SWUPDATE running : [listener_create] : creating socket at /tmp/swupdateprog
swupdate.sh[2708]: [TRACE] : SWUPDATE running : [listener_create] : creating socket at /tmp/sockinstctrl
systemd[1]: swupdate.service: start operation timed out. Terminating.
systemd[1]: swupdate.service: Failed with result 'timeout'.
systemd[1]: Failed to start SWUpdate daemon.
This commit adds a config fragment to enable systemd support to swupdate daemon.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The partition "environment" is not available in the ccmp15.
The solution suggested is read the "/proc/mounts" and check if
the "rootfs" is "ubifs" mounted.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
This commit fixes the following build warning with the swupdate v2022.05:
WARNING: dey-image-qt-swu-1.0-r0 do_swuimage: Syntax for sha256 changed,
please use $swupdate_get_sha256(dey-image-qt-wayland-ccmp15-dvk.boot.ubifs)
WARNING: dey-image-qt-swu-1.0-r0 do_swuimage: Syntax for sha256 changed,
please use $swupdate_get_sha256(dey-image-qt-wayland-ccmp15-dvk.ubifs)
WARNING: dey-image-qt-swu-1.0-r0 do_swuimage: Syntax for sha256 changed,
please use $swupdate_get_sha256(dey-image-qt-wayland-ccmp15-dvk.boot.ubifs)
WARNING: dey-image-qt-swu-1.0-r0 do_swuimage: Syntax for sha256 changed,
please use $swupdate_get_sha256(dey-image-qt-wayland-ccmp15-dvk.ubifs)
WARNING: dey-image-qt-swu-1.0-r0 do_swuimage: Syntax for sha256 changed,
please use $swupdate_get_sha256(dey-image-qt-wayland-ccmp15-dvk.boot.ubifs)
WARNING: dey-image-qt-swu-1.0-r0 do_swuimage: Syntax for sha256 changed,
please use $swupdate_get_sha256(dey-image-qt-wayland-ccmp15-dvk.ubifs)
WARNING: dey-image-qt-swu-1.0-r0 do_swuimage: Syntax for sha256 changed,
please use $swupdate_get_sha256(dey-image-qt-wayland-ccmp15-dvk.boot.ubifs)
WARNING: dey-image-qt-swu-1.0-r0 do_swuimage: Syntax for sha256 changed,
please use $swupdate_get_sha256(dey-image-qt-wayland-ccmp15-dvk.ubifs)
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
According to the Yocto reference manual, we need to specify the package name
override to indicate the package to which the value applies.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Generated Crank rootfs image for the ConnectCore MP15 is too big to fit in a
dual boot system. This commit removes gstreamer and package-management features.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
This commit updates:
* Crank engine version to the latest one (7.2)
* Crank demo to the provided one instead of the Thermostat example.
New demo is a launcher that includes 3 applications:
* Electrical vehicle charger demo
* Robot arm demo
* Medical demo
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
The ccmp1 build generates ubifs images for the NAND on the device and vfat and
ext4 images for the SD card. This commit reuses the already implemented
mechanism to match only ubifs images for the ccmp1 platforms.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Cloud Connector opens USER_BUTTON GPIO as an interrupt to listen for rising and
falling edge events and upload them to Remote Manager as data point values.
Having MCA_IO1 as user button and opened by the Cloud Connector (or any other
software) prevents the device to go to sleep when it is not connected (all
MCA GPIOs are wake-up sources when configured as interrupt)
https://onedigi.atlassian.net/browse/DEL-8155
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
This commit fixes the Ethernet entries to prevent ModemManager from trying to
manage it:
ModemManager[177]: <info> [base-manager] couldn't check support for device
'/sys/devices/platform/soc/5800a000.eth1': not supported by any plugin
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit fixes the pulseaudio recipe to launch the pulseaudio-server
service at boot time for sysvinit systems.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit exports the environment variable XDG_RUNTIME_DIR if does not exists
for services that require sharing a pulseaudio instance.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The new DVKs of the cc8mn, cc8mm and ccmp1 have a new ftdi
usb to serial chip that is recognized as a thermal device by default.
With the install_usb_driver.sh script this driver is replaced
to a USB to serial driver.
This script is included for the needed platforms in the zip
installer provided in the getting started.
https://onedigi.atlassian.net/browse/DEL-8126
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Now the cloud connector has all the logic to detect if its
running in a dual_boot system, so it is not needed this anymore.
We need to modify on the fly the path to save the image in a
dualboot system.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Use the same name for both firmware update mechanism.
Add a dependency to only add recovery-utils used by the
non dual-boot firmware update system.
Adding this only one binary/script called update-firmware will
be added.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
- create dualboot.bbclass that
- sets DUALBOOT_ENABLED variable
- defines partition names and function for changing the sw-description
for swupdate
- move files from layer into meta-digi
https://onedigi.atlassian.net/browse/DEL-7962
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Crank demo was not working on CCMP15 devices due to several changes on weston
service and the user launching it. This commit makes several fixes to make
the demo to work again:
- Add 'DEMO_USER' parameter to determine which user will launch the demo. Update
recipe and start script accordingly.
- Add 'DEMO_DISPLAY' parameter to determine the display that will be used to
launch the demo. Update recipe and start script accordingly.
- Parameterize the name of the Weston service after which the demo must be started.
Update recipe and service file accordingly.
- Give Crank engine read and execution permissions so the engine can be started
by any user.
- Add new method to the demo start script to wait until Wayland is fully setup
before actually starting the demo.
Signed-off-by: David Escalona <david.escalona@digi.com>
The new ConnectCore demo functionality makes use of some new Python libraries. Add these libraries
as a dependency in the demo recipe.
Signed-off-by: David Escalona <david.escalona@digi.com>
If a package with a postsints script requires ldconfig, the package class adds
a ldconfig postinst fragment to initialize it before. Systemd has its own
ldconfig.service to initialize it and sometimes if both services are running
at the same time in the first boot, the first one will work, but the second
one will fail with the following error:
ldconfig[141]: /sbin/ldconfig: Renaming of /etc/ld.so.cache~ to /etc/ld.so.cache failed: No such file or directory
This commit adds an ordering dependency between them to make sure that only one
service is running at the same time
https://onedigi.atlassian.net/browse/DEL-8133
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit improves the sysinfo script to skip error on platforms that don't
provide some variables.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
If we add the demo to the graphical images (dey-image-qt) the resulting
image does not fit on the rootfs partition for the smallest variant.
https://onedigi.atlassian.net/browse/DEL-8004
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The demo now has a "Play music" feature, which requires pulseaudio to be running in the device.
This commit checks if pulseaudio is running before starting the demo, and starts the service in
the case it is not.
Signed-off-by: David Escalona <david.escalona@digi.com>
These packages were added only for graphical images, however it could be used
also in non-graphical environments. This commit removes this restriction.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The latest ConnectCore demo updates introduced support for audio controls that
use the mpg123 library to manage audio on the device. This commit adds a
runtime dependency for that package.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Also clean some dead code: libjpeg-turbo is the only jpeg implementation
in poky since long ago. Also "remove-libtool" is enabled by default in
bitbake so there is no need to do it in our distro configuration.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The start/stop script of the service was using "killproc" and "pidofproc" functions from
"/etc/init.d/functions" to find the process PID. These functions rely on "pidof", which does
not work very well with Python scripts. Instead, use "pkill" and "pgrep" which allow to
search the executable in the full command line to retrieve the correct PID with the -f modifier.
Signed-off-by: David Escalona <david.escalona@digi.com>
The library recently added support for Python bindings. This commit
adds support to compile and install these Python bindings using a
new package: 'libdigiapix-python3'.
Signed-off-by: David Escalona <david.escalona@digi.com>
This patch has been integrated in meta-freescale's bbappend for
pulseaudio, so having it also in our bbappend results in Yocto trying to
apply it twice, which obviously fails and breaks the build.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The crank storyboard engine is provided in binary format. The RPM
package manager that creates the rootfs needs and explicit runtime
provider for 'libEGL.so', which in the ccmp15 is provided by the
'libegl-gcnano' runtime package.
Fix build failure:
--> Finished dependency resolution
Error:
Problem: package packagegroup-dey-crank-1.0-r0.0.ccmp15_dvk requires crank-sbengine, but none of the providers can be installed
- conflicting requests
- nothing provides libEGL.so needed by crank-sbengine-7.1-r0.3.ccmp15_dvk
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
meta-freescale updated to version '10.0.0.imx', so our bbappend fails
with:
ERROR: No recipes in default available for:
... meta-digi-dey/dynamic-layers/freescale-layer/recipes-graphics/wayland/weston_9.0.0.imx.bbappend
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This recipe downloads a tarball with the pre-built Crank engines for DEY
devices (http://log-sln-jenkins.digi.com/yocto/downloads/crank-sbengine-7.1.tar.gz):
* ConnectCore 8M Mini
* ConnectCore 8M Nano
* ConnectCore 8X
* ConnectCore 6UL
* ConnectCore 6
* ConnectCore MP1x
It installs the corresponding engine inside '/usr/share/crank/sbengine' and the
launcher script '/usr/bin/sb-launcher'.
https://onedigi.atlassian.net/browse/DEL-7969
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
Required for some Crank engine libraries. They are linked against
'libts-1.0.so.0' instead of 'libts.so.0'.
https://onedigi.atlassian.net/browse/DEL-7969
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
Required for some Crank engine libraries. They are linked against libwayland-egl
library without version, 'libwayland-egl.so'.
https://onedigi.atlassian.net/browse/DEL-7969
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
Building the wpewebkit recipe with more than 16 threads throws an unexpected
error "ninja: build stopped: subcommand failed.", so this commit limits it
to a safe value.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds a cairo bbappend from meta-st-openstlinux layer to add support
to EGL and libgles2 graphical libaries.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The Webkit version of the ConnectCore demo implements some new functionality:
- The COG browser is automatically started when the device boots loading the demo in the
primary display.
- A new Multimedia section is available to reproduce some demo videos and WebGL examples
in the device's browser.
Signed-off-by: David Escalona <david.escalona@digi.com>
The ConnectCore Demo is launched on startup and starts the web server. Demo can be accessed
by any computer in the LAN by just typing the IP address of the device in the web browser.
Signed-off-by: David Escalona <david.escalona@digi.com>
The ConnectCore Demo web page will be the new default landing page for all products,
so remove the default landing page that was created for the ccimx6ulsbc platform.
Signed-off-by: David Escalona <david.escalona@digi.com>
The ConnectCore Demo will be installed by default in all the platforms, so this recipe
is no longer required.
Signed-off-by: David Escalona <david.escalona@digi.com>
The video examples and WebGL samples will be part of the new ConnectCore Demo, so move these
recipes to a more appropriate folder. While on it, remove dependencies with 'digi-webkit-examples'
recipe as it will be obsoleted.
Signed-off-by: David Escalona <david.escalona@digi.com>
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: David Escalona <david.escalona@digi.com>
(cherry picked from commit ccc9211d00dad7be6cb2c2d0cf179a62563e26c6)
NetworkManager package moved from autotools to meson build system, so
some of the configs we added in the bbappend do not apply anymore.
Remove dead code and clean up the bbappend.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It's just a waste of space as we already have the kernel image in the
'linux' partition and that gets mounted under /mnt/linux.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We need to relax what ciphers are allowed with openssl-3.0 so that we do
not break Digi/RM. See DAL commit ec586a621c24f840ac7cc4f91241c55581698ba3
https://onedigi.atlassian.net/browse/DEL-7999
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This is the only python2-based recipe in our layer, so remove it to be
able to remove the 'meta-python2' layer from DEY as well.
Apparently it was introduced for some Optee dependence and it was used
in previous versions of 'meta-imx', but 'meta-imx' removed it as well
for Kirkstone, so we do the same here.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Since Yocto 3.4 the package "clutter-1.0" was considered a legacy component,
and moved to meta-gnome.
https://onedigi.atlassian.net/browse/DEL-7981
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
When building an SDK (with populate_sdk), all '-dev' packages are
installed. And empty 'openssh-dev' package would pull in 'openssh-sshd'
package even if our image is only depending on 'openssh-sftp'.
This causes a conflict with 'dropbear' server, which is only using
openssh-sftp.
Fix:
Problem: package dropbear-dev-2020.81-r0.4.cortexa7t2hf_neon requires dropbear = 2020.81-r0.4, but none of the providers can be installed
- package dropbear-2020.81-r0.4.cortexa7t2hf_neon conflicts with openssh provided by openssh-8.9p1-r0.7.cortexa7t2hf_neon
- package openssh-8.9p1-r0.7.cortexa7t2hf_neon conflicts with dropbear provided by dropbear-2020.81-r0.4.cortexa7t2hf_neon
- package openssh-dev-8.9p1-r0.7.cortexa7t2hf_neon requires openssh = 8.9p1-r0.7, but none of the providers can be installed
- conflicting requests
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit integrates by default support to WPA3-Enterprise modes
128-bits (WPA-EAP-SUITE-B) and 192-bits (WPA-EAP-SUITE-B-192)
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Those variables are used to hold integer data parsed from bluetooth
config file. The parsing function "get_value_from_config" returns an INT,
so the variables cannot be unsigned.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove deprecated versions of recipes updated in other general layers
(poky, meta-openembedded). Also remove duplicated IMX specific recipes that
are available in other BSP layers (meta-freescale, meta-fsl-demos, etc).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Mainly, refresh patches so they apply on top of wpa-supplicant 2.10
Murata patches from release: cypress-fmac-v5.10.9-2022_0331
NOTE: the wpa-supplicant patches in the cypress release apply on top of
1759a8e3f36a commit of the hostapd.git repository. That repository
includes both the wpa-supplicant and the hostapd packages code. In Yocto
the wpa-supplicant recipe uses the release tarball, so there is no
'hostapd' folder included. Thus, the cypress patches that changed code
in 'hostapd' and 'wpa_supplicant' folders, have been splitted in two
(the hostapd changes and the rest). In the recipe the patches that
changed 'hostapd' code have been marked as 'apply=no' because they won't
apply to the tarball, but they have not been deleted for traceability.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* Refresh the 5.56 patches on top of new version 5.64
* Separate the patches for 5.41 and 5.64. The code base has changed a
lot between those two releases, so having common patch files under
'bluez5' directory makes maintenance more cumbersome.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
One patch adds support for building the library statically and the other is a
fix for performing firmware update on the fly. These patches have been moved
from the meta-digi-dualboot layer
https://onedigi.atlassian.net/browse/DEL-7903
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
(cherry picked from commit 94018f7402586b916c5c7836eb355a19a78a9c51)
Recent improvements in the cloudconnector core added a dependency with the
swupdate library, so this commit adds a build dependency with the
swupdate package.
https://onedigi.atlassian.net/browse/DEL-7903
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
(cherry picked from commit 654ef8686fd3916ae5ad257f72bd41ed2198d958)
Commit 8c396281 ("layer: add dynamic-layers for NXP platform") introduced a
typo in the dynamic layer name.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit fixes the following build warning with the swupdate v2021.11:
WARNING: dey-image-qt-swu-1.0-r0 do_swuimage: Syntax for sha256 changed,
please use $swupdate_get_sha256(dey-image-qt-xxxxxx.boot.ubifs)
WARNING: dey-image-qt-swu-1.0-r0 do_swuimage: Syntax for sha256 changed,
please use $swupdate_get_sha256(dey-image-qt-xxxxxx.ubifs)
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Recent improvements in the cloudconnector core added a dependency with the
libdigiapix library, so this commit adds a build dependency with the
libdigiapix package.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This patch series is based on the support software package
"Infineon-cypress-fmac-v5.4.18-2021_0527" which is the latest based on
Hostap v2.9.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit moves all the work related with the initialization process to a new
recipe to allow disgregate the init scripts from the bluez5 recipe.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Port the recipe from the dunfell poky branch. This version contains the latest
vulnerability fixes, including CVE-2022-0778.
https://onedigi.atlassian.net/browse/DEL-7868
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
(cherry picked from commit be046db4faae911b2a858d748551c6c91fc54043)
Signed image support in U-Boot has been split into two separate configurations:
one that adds artifact authentication support and another that signs the U-Boot
binary at the end of the build. Reflect this change in meta-digi.
https://onedigi.atlassian.net/browse/DEL-7862
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
In meta-openembedded commit 35d249bb9a575a5a48491052896e121266d515f0,
libconfig, one of swupdate's dependencies, was split into two packages: one for
the C library and another for the C++ one. swupdate depends only on the C
library, but the C++ library was implicitly pulling in other dependencies, such
as libgcc.
After the commit mentioned above, libgcc stopped being pulled into our recovery
image, causing the following error to appear when swupdate terminates:
libgcc_s.so.1 must be installed for pthread_cancel to work
Aborting
Even if the action carried out by swupdate is successful, our recovery script
detects this as an error and aborts the update operation. Avoid this by
explicitly adding libgcc as a runtime dependency for swupdate.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit adds power safe and reboot safe script for the MCA
and substitute default reboot and poweroff busybox commands.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://onedigi.atlassian.net/browse/DEL-7828
We originally included this recipe to fix some vulnerabilities in the dnsmasq
version used in zeus (v2.80), but the recipe has been updated since then. The
current version used by default in hardknott is v2.85.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Now that the "--platform" parameter is optional, we don't need to hardcode the
platform anymore, so remove the first patch.
In this version, the FDO platform has been renamed to WL, and since the default
PACKAGECONFIG is meant to work with older cog versions, we need to manually
append the "wl" PACKAGECONFIG to build the wayland platform.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is a partial revert of commit 3819ee6672.
NXP simplified the profile script when updating to hardknott-5.10.72-2.2.0, but
since the /run/user/0 directory isn't automatically created in sysvinit
environments, the weston desktop fails to start in these cases. The previous
version of the script automatically creates said directory if it's missing, so
use that version instead.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We already have a copy of NXP's weston.ini, so there's no need to manuallly
append to it in our do_install_append(). Simply add our changes for our custom
desktop background directly in the source file.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
In older Yocto versions, weston was launched via a udev rule, but now it gets
launched as part of the "graphical" system target. Since this target isn't
reached automatically on boot, the weston desktop will only appear if you
manually launch said target (or the weston service itself).
To make the desktop launch automatically, change the target to "multi-user",
which is the default target laucnhed on boot.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This makes it possible to distinguish between two different packages:
* NXP's tensorflow-lite, which contains modifications for i.MX platforms
* Our tensorflow-lite, which is meant to be used with Google Coral
Since tensorflow-lite-coral provides a subset of the files provided by
tensorflow-lite (specifically, the python libraries), make the packages
conflict during runtime.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update a patch so it applies cleanly and remove another one, since it has
already been applied upstream
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This package was originally being added via RDEPENDS, and its removal was
missing when porting the newer file from NXP's meta-imx. Re-incorporate the
removal to avoid including the package in our images, but do so by adding it
to our images' BAD_RECOMMENDATIONS.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Even though our busybox recipe (v1.34.1) is backported from poky's honister
branch, it has many elements in common with the recipe provided from poky's
hardknott branch (v1.33.1). To simplify our backport, re-use poky's busybox
files when possible, replacing them only when strictly necessary.
While at it, remove the busybox-inittab recipe, since there are barely any
differences between the honister and hardknott versions.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This PACKAGECONFIG existed in gatesgarth, but it's included by default in
hardknott and it pulls in libgbm as a dependency. This package isn't available
for i.MX6 platforms, causing the build to fail immediately. Remove this from
the ccimx6 PACKAGECONFIG and leave it how it was on gatesgarth.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
For packages such as weston or opencv, bitbake will sometimes choose the poky
recipes, causing build errors. Explicitly set the NXP version of these packages
as the preferred version by mimicking the layer.conf configuration in the
meta-bsp layer of meta-imx.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We now use the meta-freescale recipe as a base for our .bbappend, so remove
the filter.
This reverts commit 9e68d61f7c465800d62913c044e43c541f2eacd7.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Aside from the file paths changing, there are a few cosmetic differences
between v1.22.14 and v1.30.4 that prevented the patches from applying, so
re-work them.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The common license file GPL-2.0 is now called GPL-2.0-only in poky, so we need
to reflect this name change to avoid errors
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is a generic package that is currently being used by NXP to load firmware
on the target, so include it in our images as well. Since it only works with
systemd, leave it out of builds that use sysvinit.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
poky now provides glibc v2.33 by default, and there aren't any alternative
versions available, so there's no need for this.
This reverts commit e7921dfd93.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Remove the v3.0.8 version of the recipe to use the v3.0.9 recipe in poky. Also,
adapt our .bbappend since some of its changes are outdated.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Most of the changes are cosmetic (copyright years and whitespace). Update
gstreamer1.0-plugins-good-qt to v1.18.5, remove outdated patch for said package
and sync qtwayland recipe.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We initially backported v4.5.2.imx into gatesgarth, but since that version is
already available in meta-freescale, remove the base recipe and keep only the
.bbappend.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Add custom NXP daemon.conf, new NXP patch and adapt ccimx6ulsbc patch to apply
cleanly over v14.2
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Sync the .bbappend while keeping our ccimx6 patch and remove the 9.0.0.imx
recipe, since it's already available in meta-freescale.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Francisco Gil
Arturo Buzarra
Tatiana Leon
Javier Viguera
Isaac Hermida
Mike Engel
David Escalona
Hector Palacios
Gabriel Valcazar