Modify patch to clean compiler warning:
warning: passing argument 1 of 'sysfs_mmcboot_set_protection' discards
'const' qualifier from pointer target type
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove the commit that removes the p2p0 interface at boot. This interface
is the one used to establish p2p connections. Configuring the wlan0 command
for p2p does not work.
https://jira.digi.com/browse/DEL-3390
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The qualcomm wlan driver creates two interfaces at load time, wlan0 and
p2p0. Both of them should load the module if not already loaded.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This commit adds a wpa supplicant P2P configuration file and configures
the p2p0 interface automatically at pre-up.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
For the moment the cloudconnector is provided only as static library, so
the recipe can be simplified.
https://jira.digi.com/browse/DEL-3523
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
In pulseaudio, module-suspend-on-idle controls how much time a sink spends
in the 'idle' state before going to 'suspended'. This means the ALSA device
associated with the sink stays busy for a few seconds after loading or using
the sink.
This commit adds the timeout=0 parameter when loading module-suspend-on-idle.
Now the sink will go to the 'suspended' state right after being loaded or used.
https://jira.digi.com/browse/DEL-2218
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
On boot, pulseaudio looks for the sound cards' corresponding profile sets, and
uses a default configuration if none is found. This was causing pulseaudio to
take up to 5 seconds trying every possible default profile.
This commit fixes this by creating a specific profile set for each of the sound
cards on the ccimx6sbc so pulseaudio doesn't spend time trying different
profiles that don't apply to our platform. It also adds udev rules so
pulseaudio knows which configuration to load for each card.
https://jira.digi.com/browse/DEL-2218
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The HDMI hotplug script required alsa-utils to be installed in order to work.
This commit avoids this by adding a recipe for a small binary that replaces
aplay in the script.
https://jira.digi.com/browse/DEL-3482
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Instead of using a hardcoded path to the SWU update package, just get
the filename and search the file in the different mounted partitions
(giving priority to the internal 'update' partition over other external
media).
https://jira.digi.com/browse/DEL-3466
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
For block devices we can get the filesystem in the partition using the
'blkid' command.
This cleans up some warnings on mounting:
EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (mmcblk0p4): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (mmcblk0p4): couldn't mount as ext2 due to feature incompatibilities
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
"i" variable in the nested loop is expanded to the absolute path
of the device, so prepending it with the ${device} results in
"/dev/sda/dev/sda1" for a 'sda1' partition.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These examples can be used to test Device Cloud functionality. There are three
test applications available:
* device_request_listener: Listen for requests from the Device Cloud
* upload_data_points: Upload test data points to the Device Cloud
* upload_file: Uploads the contents of a file as binary data points
https://jira.digi.com/browse/DEL-3305https://jira.digi.com/browse/DEL-3309https://jira.digi.com/browse/DEL-3397
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Even though this variable is documented as unused, removing it fails
wireless regression tests.
https://jira.digi.com/browse/DEL-3501
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This avoids the certificate package being generated according to Debian
rules (libcloudconnector-cert).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This re-enables USB mass storage support that was unintentionally
removed in commit 6851ab23e4.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-713
The dependence on virtual/kernel is added implicitly through the module
class, so there is no need to add it explicitly.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This updates the kernel configuration to the latest one
which disables unused drivers and options to optimize the
kernel size.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The CC6UL has little video capabilities and reduced storage memory so lets
remove gstreamer plugins included in -bad and -ugly to reduce the rootfs
size.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-713
The following document,
JQCA61x4, QCA65x4, and QCA937x
Configuration Parameters Specification
80-Y7674-11 Rev. J
September 30, 2016
Contains a list of unused configuration arguments in page 29. This commit
removes those listed arguments that appeared on the default configuration
file to avoid confusion.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Otherwise the module is built with debug as that is the Makefile's
default.
https://jira.digi.com/browse/DEL-3392
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
recovery-utils allows to configure recovery commands and reboot into
recovery mode.
Internal recovery-utils.git SHA1: 5555d4c736e3
https://jira.digi.com/browse/DEL-3358
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Implements functions to get and set variables from U-Boot's environment.
https://jira.digi.com/browse/DEL-3358
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
When hotplugging the HDMI cable after booting the target, pulseaudio doesn't
load the HDMI sink. This commit fixes this by adding a udev rule and a script
that prompts pulseaudio to detect the HDMI sound card and load its sink, as
well as making it the default one.
If alsa-utils is available, a faulty command is run to load the card without
any audio output. Otherwise, module-udev-detect is unloaded and reloaded.
This is based on commit fca507d316.
https://jira.digi.com/browse/DEL-2327
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These have been provided by the embedded hardware team and they are to
be used for certification testing. The calibration corresponds to the
internal antenna on the module. If using the current external antenna on the
CC6UL SBC they work fine, although they could be tweaked to improve.
The BDF files provided were generated from the original ones, by running a
test tree for output power calibration for QCA6564A-3 chip. This test
tree is called
‘FCCSP_Rome3.x_WLAN_CLPC_cal_and_WLAN_BT_Verify_Y8611-H341.xtt’ and it
belongs to the Qualcomm Design Package ‘DP25-WL420-100’.
The test tree is to be run in the QSPR software tool, part of the QDART
software tools set provided by Qualcomm.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
As discovered during certifications preparation work, calibration changes
applied only on the bdwlan30.bin file do not take effect.
Per QCA guidelines, the bdwlan30.bin and utfbd30.bin files should be the
same for the calibration changes to work.
This commit removes the current utfbd30.bin file, with an md5sum that
matches the original bdwlan30.bin file in QCA's chipcode
qca6564-le-1-0-3_qca_device repository, and creates a symbolic link to the
actual bdwlan30.bin board file used to certify Digi's module internal
antenna.
https://jira.digi.com/browse/DEL-3454
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This is a clone from the original psplash recipe init script
but with the added fix:
@@ -25,5 +25,7 @@
read rotation < /etc/rotation
fi
-/usr/bin/psplash --angle $rotation &
+if [ -c "${FBDEV:-/dev/fb0}" ]; then
+ /usr/bin/psplash --angle $rotation &
+fi
which avoids running the application when there is no framebuffer
in the system. This prevents the following error message during
boot:
Error opening /dev/fb0: No such file or directory
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2747
Some platforms, like ccimx6ulsbc, don't support jack detection
out of the box.
PulseAudio will mute the Headphones by default if it believes
there is no headphones jack plugged-in. With this patch we
tell it to preserve ALSA default value for the headphones
controls.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3435
These recipes allow to generate the .swu update packages to be used with
SWUpdate. The packages can be generated using:
bitbake dey-image-qt-swu
bitbake core-image-base-swu
https://jira.digi.com/browse/DEL-3272
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Javier Viguera
David Escalona
Hector Palacios
Alex Gonzalez
Gabriel Valcazar
Diaz de Grenu, Jose
Alejandro Navarro