We need to take in account if the IW612 chip (WiFi/Bt) is going to be powered
off on suspend state. In such a case, we need to unload the driver modules and
restore the expected tty speed for Bluetooth, so that functionality is restored
back on resume.
https://onedigi.atlassian.net/browse/DEL-8489
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The BT chip for the ccimx93 cannot be turned off, nor can it be re-uploaded.
Therefore, we need to set some conditions to assume that it is going to be
attached correctly. The changes in this script take care of that.
Upon the first attachment, the rate is set to 3M, and future uses will always
be done at this rate. If, for any reason, it was not stopped and the chip is
already attached, do nothing.
https://onedigi.atlassian.net/browse/DEL-8464
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This fix is needed for bluez-5.65 version.
We can drop it when using a newer version.
https://onedigi.atlassian.net/browse/DEL-8346
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The enabled options are mainly for AP mode, which improve the P2P
performance when the P2P node behaves as an AP, it is, as P2P GO.
https://onedigi.atlassian.net/browse/DEL-8346
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Use the specific hcitool vendor command to set the BT mac address.
It is a custom vendor command (0x3f), and the field is 0x0022.
The BT address is passed from last octet to first octet.
https://onedigi.atlassian.net/browse/DEL-8346
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Sync the defconfig to version 2.10.
Additionally, add support for new features, such as:
* ACS (auto channel selection)
* 802.11AX (Wi-Fi 6)
* SAE (WPA3 Personal)
* SUITEB192 (WPA3 Enterprise 192 bits)
https://onedigi.atlassian.net/browse/DEL-8346
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Add nxp-wlan-sdk repice as a verbatim copy and add our bbappend
for fixing the build.
This recipe include some tools, mainly for RF porpouses.
https://onedigi.atlassian.net/browse/DEL-8346
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Add the overlay required to perform the BLE HCI Raw test to the
linux default images. That way, default images can be used to certify
the product.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
1)
CcxTagControlData struct in CORE/HDD/inc/CcxTagDefs.h had some fields missing compared
with 'cctags api’ which was producing CCX_TAG_DRVR_RSP_ERR_CTRL_SIZE.
2)
Then CCX_TAG_DRVR_RSP_ERR_PACKET_SIZE aroused because following paddings:
CCX_TAG_MPDU_HEADER_PAD_SIZE = 2
CCX_TAG_CONTENT_HEADER_PAD_SIZE = 3
where producing wrong alignements and sizes between the 'cctags api’ and the driver.
With changes in this commit, master branch of ‘CCxTagTest’ repository compiled
out of source code gets on well with 'cctags api’ repository and with qca driver in
both dey-2.4 and dey4.0.
Packets in the air match 100% in content in both dey-2.4 and dey4.0.
https://onedigi.atlassian.net/browse/DEL-8446
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
Codeaurora was retired on April 2023.
Fix bbappends to point to their new location on Github.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
An official fix was added to meta-timesys in commit
ae4f6e9854361d4a6d71b6f8b87130268d990b32, so our workaround is no longer needed
This reverts commit 7a77130550.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The HWID is populated on the device tree by the boot loader.
This can be used as a key modifier when encrypting the U-Boot
environment. Some old U-Boot versions however, did not populate
the HWID on the device tree. When updating firmware from an
old version to a new one, the library may not be able to read
the HWID from the DT and then be unable to unencrypt the
environment.
This patch implements a fall-back function to read the HWID
directly from the nvmem node (sysfs). Implementation has been
done for ccimx6 family only, where this case of old U-Boot
can happen.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8444
(cherry picked from commit 222a91f213)
The commit we use to build the cryotpauthlib package is currently not part of
any branches or tags in the original MicrochipTech repo. To make sure the
package can always be built, use our mirror of the repo, which includes an
additional branch for the specific commit.
While at it, move the "nobranch=1" parameter to the GIT_URI variable, since
we're putting all other git parameters there, anyway. Also, remove the "branch"
parameter because it isn't needed in this case.
https://onedigi.atlassian.net/browse/DEL-8015
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The commit we use to build the cryotpauthlib package is currently not part of
any branches or tags in the original MicrochipTech repo. To make sure the
package can always be built, use our mirror of the repo, which includes an
additional branch for the specific commit.
While at it, move the "nobranch=1" parameter to the GIT_URI variable, since
we're putting all other git parameters there, anyway. Also, remove the "branch"
parameter because it isn't needed in this case.
https://onedigi.atlassian.net/browse/DEL-8015
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The HWID is populated on the device tree by the boot loader.
This can be used as a key modifier when encrypting the U-Boot
environment. Some old U-Boot versions however, did not populate
the HWID on the device tree. When updating firmware from an
old version to a new one, the library may not be able to read
the HWID from the DT and then be unable to unencrypt the
environment.
This patch implements a fall-back function to read the HWID
directly from the nvmem node (sysfs). Implementation has been
done for ccimx6 family only, where this case of old U-Boot
can happen.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8444
Commit 32dd3d59c250f916115b339c29aa4dbfe50a3235 in poky breaks i.MX platform
builds when "vigiles" is inherited. While we wait for a fix in the community,
work around this issue by setting a dummy default value in the MULTIUBI_BUILD
variable.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
1)
CcxTagControlData struct in CORE/HDD/inc/CcxTagDefs.h had some fields missing compared
with 'cctags api’ which was producing CCX_TAG_DRVR_RSP_ERR_CTRL_SIZE.
2)
Then CCX_TAG_DRVR_RSP_ERR_PACKET_SIZE aroused because following paddings:
CCX_TAG_MPDU_HEADER_PAD_SIZE = 2
CCX_TAG_CONTENT_HEADER_PAD_SIZE = 3
where producing wrong alignements and sizes between the 'cctags api’ and the driver.
With changes in this commit, master branch of ‘CCxTagTest’ repository compiled
out of source code gets on well with 'cctags api’ repository and with qca driver in
both dey-2.4 and dey4.0.
Packets in the air match 100% in content in both dey-2.4 and dey4.0.
https://onedigi.atlassian.net/browse/DEL-8446
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
Cloud Connector configuration file sets:
* 'edp12.devicecloud.com' as the URL to connect to (this end point uses client
certificates)
* '/mnt/data' as the directory to store downloaded certificates, now that
this is also available in emmc platforms (see
62d937df42)
This commit:
* reverts a0842cbcfd to keep
'edp12.devicecloud.com' URL that uses certificates for ccimx8m platforms.
* reverts fd94f10c0b since now the cloud connector
configuration file sets '/mnt/data' as the place to store downloaded
certificates, so no need to modify it for ccmp1 platforms.
* It also configures '/etc/ssl/certs' as the certificates directory for cc6ul
devices. Although by default, these devices are connecting to
'remotemanager.digi.com' that not uses certificates, we prefer to use an
existing directory in that setting. See commit
063a946e7c.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
'environment' partition is not available in the ccmp15.
The solution suggested is read the "/proc/mounts" and check if the 'rootfs' is
'ubifs' mounted.
Related to commits 7c07b15370 and
678eaaf0fc4ce74e67682387e3465eb29659bd47
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
This commit adds a new function to get the active system in a dualboot device
without using 'active_system' U-Boot variable.
This way the script always knows the real active system even when the variable
'active_system' has the value of the next boot active system, for example, after
performing a 'update-firmware --swap-active-system'.
https://onedigi.atlassian.net/browse/DEL-8399
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
This option combined with '-a' ('--active') only prints the active block: a or b
The purpose an output to be consumed by other scripts or programs.
https://onedigi.atlassian.net/browse/DEL-8399
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
Check the second ('/') and third ('ubifs') field of 'rootfs' entry in
'/proc/mounts' as the first one ('rootfs_a' or 'rootfs_b') may be changed by
custormers:
root@ccmp15-dvk:~# cat /proc/mounts
ubi0:rootfs_b / ubifs rw,relatime,assert=read-only,ubi=0,vol=5 0 0
[...]
https://onedigi.atlassian.net/browse/DEL-8399
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
This is required for the firmware update using Digi Remote Manager. The reboot
is commanded by the server, it that does not happen the update process is not
ended for DRM.
https://onedigi.atlassian.net/browse/DEL-8399
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
Codeaurora was retired on April 2023.
Fix bbappends to point to their new location on Github.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
For devices running 'systemd', the mount process is done through 'systemd-mount', which
spawns a system unit. Trying to mount the partition again throws an error stating that a
unit with the same name is already running. To avoid it, check if the unit is already
spawned before mounting the partition and, if so, just restart the unit.
Signed-off-by: David Escalona <david.escalona@digi.com>
The bluetooth FW for the IW612 is loaded together with WiFi FW, so there
is not BT FW file as in our other products.
In order to use the BT, it is a requirement to load the WiFi FW, so
ensure that the service is started after the load of the system
modules.
https://onedigi.atlassian.net/browse/DEL-8346
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
add a verbatim copy of those recipes as they are provided by nxp in langdale-6.1.1-1.0.0
https://onedigi.atlassian.net/browse/DEL-8346
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
- Add missing PNs and order list as per Digi website.
- Remove SBC Express, which is not available for purchase.
Reported-by: Leonid Makhnovskiy <leonid.makhnovskiy@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
(cherry picked from commit 4f1bbf4d2d)
- Add missing PNs and order list as per Digi website.
- Remove SBC Express, which is not available for purchase.
Reported-by: Leonid Makhnovskiy <leonid.makhnovskiy@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Instead of changing POKY_DEFAULT_DISTRO_FEATURES, do the distro features
configuration directly in the DISTRO_FEATURES variable. Also, add a couple
of variables (MACHINE_DISTRO_FEATURES_ADD/REMOVE) that allow machines
for extra tweaking the distro features.
While on it, clean up some distro features:
- pulseaudio: already added by DISTRO_FEATURES_BACKFILL
- bluez5, splashscreen, initrd, gplv3: not used (dead code)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
In rare cases, the wlan module may fail to load. In this scenario, forcing the
MMC driver to rebind the interface resolves the issue, making the WLAN module
load more reliably.
This only affects to modules where the qca chip is connected through the
MMC interface.
https://onedigi.atlassian.net/browse/DEL-8361
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
There are other device managers (e.g. mdev) that do not understand those
udev rules, so do not install them unconditionally.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Isaac Hermida
David Escalona
Gonzalo Ruiz
Hector Bujanda
Hector Palacios
Gabriel Valcazar
Tatiana Leon
Javier Viguera
Arturo Buzarra
Francisco Gil