Commit Graph

12 Commits

Author SHA1 Message Date
Javier Viguera 2c2c6e3896 ccimx93: remove A0 SOC revision overlay
With the update of the ethos-u firmware for the NPU in previous commit,
this overlay is no longer required.

Signed-off-by: Javier Viguera <javier.viguera@digi.com>
2024-01-12 13:11:19 +01:00
Javier Viguera 46550c51cf ccimx93: remove MCA support as it's not populated
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
2024-01-08 16:26:44 +01:00
Isaac Hermida 4c8bde2bc3 u-boot: ccimx93: add bootscript support for cpu rev A0
Add support to the bootscript to load the CPU overlay for the A0 rev.

https://onedigi.atlassian.net/browse/DEL-8743

Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
2023-10-26 16:11:28 +02:00
Hector Palacios 918a9caf1d boot scripts: print boot attempts only when bootcount mechanism active
Improve boot attempts message showing not only the current boot attempt
but also the limit:
	(boot attempt 1/3)

Print the message only when the bootcount mechanism is active, i.e. when
the bootlimit is defined (not zero), and when bootcount is > 0.

Signed-off-by: Hector Palacios <hector.palacios@digi.com>

https://onedigi.atlassian.net/browse/DUB-1056
2023-10-20 10:48:07 +02:00
David Escalona 910ee4ab44 u-boot-dey: boot: update all boot scripts to synchronize boot variables for dualboot systems
Until now, for dualboot systems, all boot variables were calculated on each boot depending on the value of the
'active_system'. These variables are used to boot the device but were not saved, which could lead to a missmatch
between their value in the environment and their required values to correctly boot the system. This commit
simplifies a bit the variables calculation and adds a block to synchronize their value in the environment.

Signed-off-by: David Escalona <david.escalona@digi.com>
2023-09-04 18:23:58 +02:00
David Escalona 88f74279b1 recipes-bsp: u-boot: boot-scripts: update boot scripts to use new 'bootcount' mechanism
The 'bootcount' value is now incremented and stored in the system on every boot and
not only then the 'upgrade_available' flag is set. Also, ensure the value is cleared
when the 'altboot' script is executed by running the new U-Boot command 'bootcount reset'.

https://onedigi.atlassian.net/browse/DEL-8506

Signed-off-by: David Escalona <david.escalona@digi.com>
2023-08-29 09:48:04 +02:00
Isaac Hermida e369f71019 u-boot-dey: ccimx93: fix boot from sdcard image
When booting from recovery sdcard, in the imx93 the dualboot is yes by
default, so the mmcroot variable was not set correctly for the uSD.
If we boot from uSD, just assume all the system is in the uSD card, whether
it is a recovery system or a prepared uSD card for demo.

https://onedigi.atlassian.net/browse/DEL-8461

Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
2023-08-18 17:19:58 +02:00
Isaac Hermida 130a5c796c ccimx93: add support for NPU dtb overlay
Load the NPU overlay based on the CPU model.

https://onedigi.atlassian.net/browse/DEL-8565
https://onedigi.atlassian.net/browse/DEL-8563

Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
2023-06-22 16:03:16 +02:00
Javier Viguera 753424ae91 ccimx93: add support for MCA dtb overlay
On boot, it is enabled dynamically depending on MCA setting in HWID.

Signed-off-by: Javier Viguera <javier.viguera@digi.com>
2023-01-23 17:33:31 +01:00
Javier Viguera aab5eda5c2 meta-digi-arm: add kernel parameter for single boot logo
Number of bootup logos is now configured using fbcon=logo-count parameter,
so use it instead of our deprecated custom code in the kernel.

For backwards compatibility, we add this parameter in the u-boot boot
script for all platforms but the ccimx93, where this is directly handled
by u-boot (v2022.04).

Signed-off-by: Javier Viguera <javier.viguera@digi.com>
2023-01-23 17:33:31 +01:00
Javier Viguera 60e499f423 u-boot-dey: customize boot script for ccimx93
This was a verbatim copy of the one for the ccimx8mm.

Signed-off-by: Javier Viguera <javier.viguera@digi.com>
2023-01-03 18:54:47 +01:00
Javier Viguera cfa581c958 meta-digi: add override files for ccimx93
These are just a verbatim copy of the ccimx8mm ones, so the project is
buildable. This file list should be revisited and adapted for the
ccimx93.

Signed-off-by: Javier Viguera <javier.viguera@digi.com>
2022-12-20 14:50:54 +01:00