This is an NXP change that reverts a mainline weston commit form v9.0.0, in
which the mouse cursor only gets activated when there is mouse movement. This
change was only being included in the weston v10.0.X i.MX forks.
For platforms that don't use these weston forks (ccimx93 uses the v11.0.X fork
and ccmp15 uses mainline weston), the mouse cursor doesn't load right away when
booting the system, which causes apps that are automatically launched (such as
the LVGL demo) to not register the mouse, rendering said apps unresponsive to
it.
Port NXP's change to all of the weston versions we currently use to avoid this
problem.
https://onedigi.atlassian.net/browse/DEL-8865
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Up until recently, we were only generating dey-image-qt images for the
ccimx93-dvk. Now that we are generating dey-image-lvgl images as well, make
sure to print the helper message to set image-name when installing said images.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
One of the conditions used to determine the U-Boot file was missing its
terminator, breaking the script.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
New AR6233 chips from Qualcomm require a power reduction in the 2.4GHz
band to maintain a good EVM.
Generate new board data files with this optimized target power
configuration, but do not replace the original board data files so this
change does not affect CC6 modules with the original AR6233 chip.
The new AR6233 will be populated in modules with Hardware Version=6 or
higher. Load one board data file or the other based on the Hardware
Version field of the HWID via a post-installation script.
Board data files with optimized TX Power ('b' files):
- Digi_6203-6233-US_b.bin (MD5SUM: 53db0fba1eea22d5c7248b35669234bd)
- Digi_6203-6233-World_b.bin (MD5SUM: 307ea9e9364c46a243a36124c92cddc2)
- Digi_6203_2_ANT-US_b.bin (MD5SUM: 741f69584f43258ec15bfccaebdb8896)
- Digi_6203_2_ANT-World_b.bin (MD5SUM: 9f89d081aaef7f26292d42ad193c188d)
https://onedigi.atlassian.net/browse/DEL-8851
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The ccimx93 bootloader signing requires this version of the sign script,
but at the moment, the updated script is not compatible with the other
AHAB-based module (ccimx8x), so we cannot just update the recipe for
all modules.
Thus, create a new version of the recipe and use that for the ccimx93
while we still use the old version for the rest of the platforms.
https://onedigi.atlassian.net/browse/DUB-1068
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
An additional line was added to a comment block without the '#' character,
resulting in the following error when running the script:
Unknown command '-' - try 'help'
Nonetheless, this error is harmless and the script continues as expected, which
is the reason why we hadn't found it until now.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
In case a HWID is not set or the variant is unknown, do not set it to a default
U-Boot file but ask the user for the proper file.
This case should not happen, but cover it for safety.
https://onedigi.atlassian.net/browse/DEL-8855
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The ccimx6ul is the only platform that doesn't include a desktop backend in the
LVGL image, so remove the desktop backend suffix from the image's name. This
affects the image name itself, the corresponding SWU package and the
installation scripts.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The support to update U-Boot in the redundant partition must be enabled in the project
configuration file by setting the variable "SWUPDATE_UBOOTIMG_REDUNDANT" to "true":
SWUPDATE_UBOOTIMG_REDUNDANT = "true"
This feature is only available for the newer platforms: ccmp13, ccmp15 and ccimx93. Trying to
enable it in older platforms will display a warning and fallback to non-redundant update.
Signed-off-by: David Escalona <david.escalona@digi.com>
Backport of multimedia package for ccimx93 from NXP's Mickledore-based
lf-6.1.55-2.2.0 release. Mainly copies and appends of multimedia
recipes from the new release, and restricted to ccimx93 by changing the
COMPATIBLE_MACHINE, so it does not affect other platforms.
https://onedigi.atlassian.net/browse/DEL-8840
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
libubootenv treats negative offsets as backwards offset from the end of
the block device, so use that to move the environment to the last 16KiB
of the hardware boot partitions.
https://onedigi.atlassian.net/browse/DUB-1064
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This new variable establishes the number of 1Kb blocks to skip before writing U-Boot in the
bootloader partition.
Signed-off-by: David Escalona <david.escalona@digi.com>
With the update of the ethos-u firmware for the NPU in previous commit,
this overlay is no longer required.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
As part of the integration of the new ML package, also update the
ethos-u-firmware binary built from Stash:
Repo: emp/ethos_u_firmware.git
Revision: bd5506ddba364ad04602d5009b77077f78450b97
Source: NXP's MCUXpresso SDK_2.14.2_MIMX9352xxxxM
Co-authored-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The result of the modprobe operation doesn't guarantee the driver loaded
correctly. The module may succeed and be loaded, but failures during the
probe may not propagate and result in an error of modprobe.
The valid condition is to check the existence of the interface in
/sys/class/net/wlan0.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8821
In commit a84d011 this was fixed for mount_digiparts.sh, but
was missing the fix in the mount.sh script.
In that commit there is a full explanation about why this
solves the issue.
https://onedigi.atlassian.net/browse/DEL-8721
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
With this new rule, only the medias that contain a filesystem
on them are mounted, filtering several calls to mount.sh.
I have checked that this change doesn't increase the boot time
at all.
https://onedigi.atlassian.net/browse/DEL-8826
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Backport of graphics package for ccimx93 from NXP's Mickledore-based
lf-6.1.55-2.2.0 release. Mainly copies and appends of graphics recipes
from the new release, and restricted to ccimx93 by changing the
COMPATIBLE_MACHINE, so it does not affect other platforms.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The TF-A and OP-TEE images have different suffixes depending
on whether TrustFence is enabled or not, but the suffix variables
themselves must exist independently of whether TF is enabled.
Currently, they were defined on the trustfence.bbclass, and the
variables did not exist when TF was disabled, which caused build
problems, for example, building the SWU file.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This compression method has a better compression ratio than the default (lzo),
but the (de)compression speed is slower, leading to slower read/write speeds.
However, the recovery partition only gets accessed in specific use cases such
as software updates and partition encryption, and it contains an initramfs. The
UBIFS will only be read at boot time to load its elements, but once the
initramfs is loaded in RAM, there are no more read/write operations to the
UBIFS during runtime, so the speed penalty is minimal.
Take advantage of the improved compression ratio to reduce the size of the
recovery image. On the ccimx6ul, the size is reduced by 248 KiB.
https://onedigi.atlassian.net/browse/DEL-8819https://onedigi.atlassian.net/browse/DEL-8825
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When TrustFence is enabled, the boot artifacts (TFA and FIP)
have a 'signed' suffix. Handle this case so that the correct
symlinks are created and the correct artifacts are put into the
SWU file.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
For signing SWU files we need to set a couple of variables:
- SWUPDATE_PRIVATE_KEY_TEMPLATE to the private key file
- SWUPDATE_PASSWORD_FILE to the password of the private key
The latter must only contain one password, whereas the current key_pass.txt
file had (for the ccmp13) the eight keys separated by a white space.
This commit:
- If the file key_pass.txt exists, it extracts each key into a separate
file key_pass0X.txt.
- If the keys don't exist, generates separate files per key.
- Changes the permissions of password files to 400.
- Adapts the sign script to use the single password files.
- Fixes a few quotes
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Starting with NXP release "lf-6.1.55-2.2.0" the IMX optee fork (based on
version 4.0.0) does not support SOC revision A0. This commit recovers
support to build a bootloader for A0, extending the optee patch for
ccimx93 to support A0 with a build time option, and then extending the
optee-os and imx-boot recipes to build two optee binaries and using them
to generate bootloaders for both SOC revisions.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This includes also an update and rename of the Edgelock Enclave firmware
package (firmware-ele-imx).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Commit d3f3cfdb62 removed the inclusion of STM's
linux-stm32mp.inc from meta-st-stm32mp in our linux-dey recipe, but this
inadvertently removed the logic in do_configure() necessary to use our custom
ccmp1_defconfig. Since this commit, the kernel was being built with the default
ARM defconfig, which is very different from our custom defconfig and doesn't
even boot on MP1 platforms.
Rework the logic used to copy our platform's defconfigs to prevent this.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit removes the BOOTLOADER_SEEK_OFFSER, because it has been
moved into the swupdate class and renamed into SWUPDATE_UBOOT_OFFSET.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
This commit adds u-boot swupdate support for all platforms.
Now u-boot can be updated with all our supported update
options. Currently it will only update first partition
u-boot partition.
https://onedigi.atlassian.net/browse/DEL-8749
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
The 'mtd-blacklist' parameter prevents swupdate from acting upon those
partitions that we consider sensitive.
Make such list platform-dependent.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The LEGACY_IMAGE_FORMAT defaults to 'y' if there is no FIT
support, which happens after applying the default configuration.
Then, the FIT support is added in a config fragment, but the
LEGACY_IMAGE_FORMAT is not disabled.
Disabling this is recommended to avoid the possibility to boot
unsigned legacy images.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
As part of the integration of the new ML package, also update the
ethos-u-firmware binary built from Stash:
Repo: emp/ethos_u_firmware.git
Revision: a0352b0cf7267c896b55980dedd08daddc780733
Source: NXP's MCUXpresso SDK_2.14.0_MIMX9352xxxxK
And, drop deepview-rt support for ccimx93, as NXP has done the same in
6.1.36-2.1.0 release.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The U-Boot bootscript loads the fitImage into RAM memory to run
this bootscript. This bootscript ends up calling 'dboot' command
to run the FIT default configuration.
To avoid 'dboot' re-loading again the fitImage into RAM memory,
set this temporary variable that will be immediately reset
by 'dboot'.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Arturo Buzarra
Gabriel Valcazar
Gonzalo Ruiz
Javier Viguera
Isaac Hermida
David Escalona
Mike Engel
Hector Palacios
Francisco Gil
Hector Bujanda