Retrieve the Bluetooth MAC address from the device tree (DT) node
rather than from the environment.
U-Boot will populate this address by default, but it can be
overridden with a custom MAC address specified directly in the DT,
which then takes priority.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Use an HCI vendor-specific command from Infineon on bluetooth-init
to set a custom MAC address every time the interface is started.
Valid for both CCMP1 (Murata 2AE) and CCMP2 (Murata 2FY) devices.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The HCI_UART Bluetooth driver does not support suspend-to-RAM operation, so the
driver must be loaded and unloaded manually. This commit adds support for the
Bluetooth initialization script used across Digi platforms, specifically for
ConnectCore MP13 and MP15.
https://onedigi.atlassian.net/browse/DEL-9650
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
poky commit 3c9b461dd0d26a5f6941000d839636ad32cd6f29 added this binary to the
bluez5-noinst-tools package, and it has the same exact path as the one from our
dey-examples-btconfig package. This causes a conflict when both packages are
installed in the same image.
Judging by bluez5's btconfig sources, it's merely a skeleton without any real
functionality, so simply remove it to avoid the conflict.
https://onedigi.atlassian.net/browse/DEL-9612
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Unify all the different bluetooth init scripts.
The service can be started as oneshot instead of forking, as in all cases
the attach command is started daemonized in background.
Regarding the service requirements, just rely on udev so the HW itself
should be detected and ready.
Make it running before the bluetooth service, so the HW Bluetooth device
is fully ready when bluetooth service starts.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
bluez5-init is a Digi custom recipe to collect the init script
needed to bring up the specific platform bluetooth hardware.
CCMP1s do not require any bluetooth init extra action.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Do not take any action such as removing the btnxpuart module When
the system is being restarted (poweroff or reboot), as the driver
tries to restore the UART baudrate when removing the module, and if
the system is being off, some of the entries might be dissapeared in the
middle of the process, leading to a NULL pointer and preventing the
system of being rebooted.
The btnxpuart can be removed on suspend/resume safely, so add the logic
to detect if the system is being rebooted.
https://onedigi.atlassian.net/browse/DEL-9290
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Sporadically, the BT FW is uploaded but the interface is not functional
as it is not up and its entries are not populated. Validate the FW
was correctly set, if not, rely on the retry mechanism.
https://onedigi.atlassian.net/browse/DEL-9006
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Our distribution is Digi Embedded Yocto (DEY), so use that to mark the
upstream status of the patches in our layer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is the version of the recipe provided by poky in Yocto 5.0 scarthgap.
Aside from updating the verison number, explicitly create /etc/bluetooth
directory during installation.
The creation of this directory was removed from the recipe's base do_install()
in poky (see poky commit 55692591227eaac2d50ab339eea87ddca395f6df), so we need
to create it in our bbappend to be able to add files to it.
https://onedigi.atlassian.net/browse/DEL-9011
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is a workaround for a driver failure when unloading the module. The
"btnxpuart" driver crashes with a null pointer dereference if the bluetooth
interface is down when the module is unloaded.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Revert to the previous used order for the bluetooth related
services. First, load the driver and then execute the bluetooth
daemon. This is needed for two reasons:
* The bluetooth daemon caches the MAC address. Loading the module before
ensures the daemon caches the correct MAC.
* The connectcore-demo server stops working if the bluetooth interface
is unavailable when the server launches. This order ensures the demo
works as expected.
This change also brings back the problem of the btnxpuart module unload
failure on reboot/suspend. The following commit adds a workaround for
the driver issue.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
According to systemd manual, "After" setting expects a space-separated
list. Fix the wrong comma-separated list to prevent the following boot
failure:
bluetooth-init.service:4: Failed to add dependency on systemd-udev-settle.service,bluetooth.service, ignoring: Invalid argument
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The bluetooth daemon does not need the interface to exist before being
executed. We configure the daemon with AutoEnable=true, which will enable
adapters present on start or that appear later on.
On shutdown, systemd stops services in the opposite order to the boot,
so configuring the driver load service after the bluetooth service,
ensures that on shutdown the driver is unloaded before the bluetooth
daemon is stopped.
The btnxpuart driver needs this order, to prevent a module unload failure
on system reboot/poweroff.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commits adds the CCMX91 platform to the DEY
build system. Furthermore, it creates generic ccimx9
support to be used for the CCiMX91 and CCiMX93
platform.
https://onedigi.atlassian.net/browse/DEL-9106
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
This reverts commit c5b53c9765.
The HCI reset interface is fixed inside each BT power calibration shell
script, so this workaround is not needed anymore.
https://onedigi.atlassian.net/browse/DEL-8458
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
for the IW61x, when the FW is instructed with an hci reset command, the
LE stack is not correctly reset.
It can be workaround-ed by SW doing a SW power cycle.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The btnxpuart driver uses internally the serial port to manage the chip, and
loads the BT FW independently of the WiFi subsystem.
While on it, add support in the bluetooth-init script to be able to power the
chip when the WiFi support is not present.
https://onedigi.atlassian.net/browse/DEL-8632
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Ensure we leave the Bluetooth interface up after attaching it. If not,
under some circumstances, it could be down.
https://onedigi.atlassian.net/browse/DEL-8608
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Masking the extended advertising flag makes the hcitool lescan work, but
triggers functionality problem such as bluetoothctl scanning or extended
advertisement not working.
Do not mask it, so use bluetoothctl scan instead of hcitool lescan to discover
LE devices.
This reverts commit ac1e4633fb.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The BT chip for the ccimx93 cannot be turned off, nor can it be re-uploaded.
Therefore, we need to set some conditions to assume that it is going to be
attached correctly. The changes in this script take care of that.
Upon the first attachment, the rate is set to 3M, and future uses will always
be done at this rate. If, for any reason, it was not stopped and the chip is
already attached, do nothing.
https://onedigi.atlassian.net/browse/DEL-8464
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This fix is needed for bluez-5.65 version.
We can drop it when using a newer version.
https://onedigi.atlassian.net/browse/DEL-8346
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Use the specific hcitool vendor command to set the BT mac address.
It is a custom vendor command (0x3f), and the field is 0x0022.
The BT address is passed from last octet to first octet.
https://onedigi.atlassian.net/browse/DEL-8346
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The bluetooth FW for the IW612 is loaded together with WiFi FW, so there
is not BT FW file as in our other products.
In order to use the BT, it is a requirement to load the WiFi FW, so
ensure that the service is started after the load of the system
modules.
https://onedigi.atlassian.net/browse/DEL-8346
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
True is the default since long time ago, and thus not necessary. This
follows similar changes done in other layers.
Command used:
sed -e 's|\(d\.getVar \?\)( \?\([^,()]*\), \?True)|\1(\2)|g' -i $(git grep -E 'getVar ?\( ?([^,()]*), ?True\)' | cut -d':' -f1 | sort -u)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Packages bluez5-init, cloudconnector, and connectcore-demo-example-webkit
provide a launcher script that is used regardless of the init system being
systemd or sysvinit. Those launcher scripts use the '/etc/init.d/functions'
file, which is provided by the 'initscripts-functions' runtime package,
so add that runtime dependence.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Starting at Bluez 5.48, the battery characteristic was moved to the
DBUS org.bluez.Battery1 interface. This causes the device to try to
read information from iOS devices after establishing a connection,
triggering a reverse pairing request. This scenario causes random
disconnects in iOS devices unless a trust agent is registered in the
host to take care of the pairing. Removing the battery plugin at
startup fixes the issue.
Signed-off-by: David Escalona <david.escalona@digi.com>
Those variables are used to hold integer data parsed from bluetooth
config file. The parsing function "get_value_from_config" returns an INT,
so the variables cannot be unsigned.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* Refresh the 5.56 patches on top of new version 5.64
* Separate the patches for 5.41 and 5.64. The code base has changed a
lot between those two releases, so having common patch files under
'bluez5' directory makes maintenance more cumbersome.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit moves all the work related with the initialization process to a new
recipe to allow disgregate the init scripts from the bluez5 recipe.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Some packages require different scripts, configuration files or installations
depending on the wireless chip assembled on the target. In general, the way
to support both chips in one image is to have the recipes install both
versions of the aforementioned files, then leave only the strictly necessary
version once the wireless chip can be deduced.
In the case of the init-ifupdown recipe, this involves installing temporary
configuration fragments that are later erased. In the case of the standby
script, the logic can be implemented in a single file.
https://onedigi.atlassian.net/browse/DEL-7661https://onedigi.atlassian.net/browse/DEL-7666
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This allows the packages to be included in the ccimx6sbc images. While at it,
include the Qualcomm bluez patches in ccimx6 builds. These patches aren't
destructive, they simply add functionality required by the Qualcomm chip, so
they shouldn't have any secondary effects when using the Atheros chip.
https://onedigi.atlassian.net/browse/DEL-7661https://onedigi.atlassian.net/browse/DEL-7666
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Simplify the structure of the recipe folder, if one version is not supported
we must use the COMPATIBLE_MACHINE overwrite
https://jira.digi.com/browse/DEL-7508
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The 'distro_features_check' class has had its functionality expanded, as
a result the class has now been renamed to 'features_check'
https://jira.digi.com/browse/DEL-7508
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Gonzalo Ruiz
Isaac Hermida
Arturo Buzarra
Gabriel Valcazar
Javier Viguera
Mike Engel
David Escalona
Hector Palacios
Francisco Gil