The FIP flavor for OP-TEE + USB is managed in the meta-st-stm32mp layer through
the "optee-programmer-usb". However, since we do not require the additional
overhead introduced by the STM32CubeProgrammer tool, this commit introduces a
new FIP configuration based on OP-TEE for booting from USB.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit defines the device tree file variable used to generate the SD card
image, fixing the build of the bootloader flavor intended for booting from an
SD card.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The sign script has been updated to support AHAB-based modules like the CCIMX8X.
As a result, there is no longer a need to maintain two separate recipes for the
signing scripts. This commit unifies them into a single recipe.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Due to a change in systemd the default home directory is now "/root".
Modify our recipes to match with this change.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Update to 4.4.0 version following 'lf-6.6.52_2.2.0' NXP release.
This has not been released in meta-freescale yet, so reuse 4.2.0
recipes and apply the changes from meta-imx commit
900356ea1bf71854053266eec4b92adf4552624c.
https://onedigi.atlassian.net/browse/DEL-9417
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Device tree overlays now have the extension 'dtso' that
distinguishes them from board 'dts' files, so there is
no need for a prefix '_ov_' to tell if a file contains
a DT overlay.
To make them shorter and easier to tell the platform they
are for, change the filename format to:
<platform-name>_<functionality>.dtso
where <platform-name> can be the name of the SOM or the
name of the DVK, so there is no need either to specify
'som' or 'board' on the filename.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This doesn't change the behavior of the linux-dey recipe, all it does is make
the LINUX_GIT_URI variable accessible to any meta-digi recipe.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Now all platforms support setting the GPIO name instead of an index
as the configuration for the GPIO-enabled secure console.
Repurpose the TRUSTFENCE_GPIO_ENABLE macro to directly set the GPIO
name.
Also take the opportunity to remove TRUSTFENCE_GPIO_ENABLE and
TRUSTFENCE_CONSOLE_PASSPHRASE_ENABLE commented definitions from bbclass
and conf files, and remove a duplicated TRUSTFENCE_CONSOLE_DISABLE
definition from ccmp1.inc.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
When ST_OPTEE_DEBUG_TRACE=0, the source code default to a LOG_LEVEL=2
which prints a lot of messages on the boot log.
Reduce it to LOG_LEVEL=1.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
After the rework in 61eb1bfbe6 the metadata
file inside the fip/ subfolder has the default filename 'metadata.bin'.
Use the new symlinks that now live on the deployimgdir.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
bluez5-init is a Digi custom recipe to collect the init script
needed to bring up the specific platform bluetooth hardware.
CCMP1s do not require any bluetooth init extra action.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
A recent meta-freescale update broke the firmware-ele-imx recipe by setting
a default SECO_FIRWARE_NAME value containing a SoC revision macro we don't
have access to (IMX_SOC_REV_LOWER). Like we do for the ccimx93, use our SoM's
override to overwrite the meta-freescale value with our own.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This override was recently added to meta-freescale's graphical package recipes
to easily distinguish between i.MX platforms that use the Vivante driver and
those that use the Mali one. Without this change, a lot of these recipes are
broken, so sync with the latest changes in meta-freescale's imx-base.inc file.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit increases the maximum rootfs size to 2.5 GB, aligning it with the
default rootfs partition size of 3 GB. This adjustment allows adding all the
functionality required by the user.
https://onedigi.atlassian.net/browse/DEL-9456
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
We tested all tarball compression formats supported by poky, and although bz2
has faster (de)compression time, xz is better in terms of compression ratio:
for all of the rootfs tarballs generated for our currently supported
images/platforms (15 at the moment), the xz format saves an average of 30 MiB
per tarball compared to bz2, totalling up to 450 MiB.
No extra dependencies are pulled in, since xz-native is already being pulled in
for all of our image builds, so the only drawback to this change is the
increased compression time (+7.34s on average per tarball).
https://onedigi.atlassian.net/browse/DEL-9459
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We have these features enabled for our mp1 platforms, and the optee one is
needed in order to pull in the optee-os package to the images/sdk.
https://onedigi.atlassian.net/browse/DEL-9443
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit clears the Cortex-M33 applications list to prevent including all
the Cortex-M33 demo applications from the ST layer. In the future, if we have
custom Digi examples, they should be added here.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
.ext4 files are identical to .ext4.gz, but uncompressed. .tar.xz files are the
exact same as .tar.bz2, but compressed with a different format.
Remove these artifacts to reduce storage overhead and to match the rest of our
platforms.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This replicates meta-imx commit addc08b02f9a, which was added to be able to
re-use packages in i.MX8/i.MX9 builds. Without this change, there are
compilation errors when building recent versions of the onnxruntime package
because some .S files are built with specific -march switches that conflict
with our current tunings. For example, when building for the ccimx8x-sbc-pro:
cc1: error: switch '-mcpu=cortex-a35+crc+crypto' conflicts with '-march=armv8.2-a+fp16' switch [-Werror]
[...]HalfGemmKernelNeon.S:151: Error: selected processor does not support `fmla v20.8h,v16.8h,v0.h[0]'
Using the generic tuning solves this issue, and according to the log in the
original meta-imx commit, this has minimal to no impact on binaries, so use
said tuning in all relevant platforms.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Based on the boot schemes and sources supported for each platform, the boot
artifacts now include this information in their filenames. This commit updates
the filenames accordingly in several recipes.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The value of this variable is always the same within a platform, so it doesn't
make sense to have different variables for it in each recipe that requires it.
While at it, it seems like all currently supported platforms in DEY 5.0 use the
same value of "wayland-1", presumably because they all use similar versions of
wayland/weston. Set this as the default value for all platforms for now. As we
support more platforms, we can adjust this value if needed, but if it ends up
being the same for all platforms, we can just hardcode it.
https://onedigi.atlassian.net/browse/DEL-9404
Co-authored-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit removes kernel headers from the SDK package list to prevent
overwriting the default ones, as there are currently no ST-specific headers
required.
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the default FIP generation variables to align with the
common stm32mp2 configuration files from the latest meta-st-stm32mp layer,
based on the openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0
(Scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update ccmp2 platform to use the latest U-Boot v2023.10 based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update ccmp2 platform to use the latest Linux kernel v6.6.48 based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes the gcnano recipes integrated into meta-digi, as a new
version (v6.4.19) has been released in the latest ST BSP, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (Scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes all outdated OPTEE-OS recipes and synchronizes the Digi custom
.bbappend with the latest v4.0.0 from the ST BSP release, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes all outdated TF-A recipes and synchronizes the Digi custom
.bbappend with the latest v2.10 from the ST BSP release, based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
By default, wpewebkit now depends on flite, a package that is provided by said
layer. To meet this dependency, all platforms that are capable of running
webkit must include this layer.
https://onedigi.atlassian.net/browse/DEL-9011
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
poky has reworked the format of image names, hardcoding the IMAGE_NAME_SUFFIX
(.rootfs) into IMAGE_LINK_NAME, the name used for image symlinks. This would
only be considered a cosmetic change if it weren't for the fact that we have
scripts and test infrastructure that relies on the old image name format, and
this change would force us to rework it all.
Remove the suffix from the link name to maintain our image name format, and
reflect this name in our custom image type scripts. Note that this removes
".rootfs" from several files, for example:
* .rootfs.ext4.gz is now .ext4.gz
* .rootfs.cpio.gz.u-boot.tf is now .cpio.gz.u-boot.tf
* .rootfs.ubifs is now .ubifs
* .rootfs.sdcard is now .sdcard
However, symlink names and non-rootfs files (.boot.vfat, .recovery.vfat...)
are unchanged.
https://onedigi.atlassian.net/browse/DEL-9011
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This variable now has a weak assignment in poky with the default value
"sysvinit", which was overriding our weak assignments.
https://onedigi.atlassian.net/browse/DEL-9011
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Remove ccimx9-specific versions from the ccimx9 machine file and use the same
package versions for all platforms, except where noted explicitly in
imx-base.inc. Also, reflect the latest ported changes from meta-imx.
https://onedigi.atlassian.net/browse/DEL-9011https://onedigi.atlassian.net/browse/DEL-9081
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Arturo Buzarra
Isaac Hermida
Hector Palacios
Francisco Gil
Gonzalo Ruiz
Gabriel Valcazar
Javier Viguera