meta-freescale updated the base recipe for NXP's release 6.6.52_2.2.1,
so our overrides in the bbappend are no longer needed.
https://onedigi.atlassian.net/browse/DEL-9748
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
On NXP platforms, the signed/encrypted bootloader images are not
included on the installer ZIP. This prevents from using the installer
when TrustFence is enabled.
This commit adds to the installer:
- If encryption is enabled
- encrypted bootloader
- signed bootloader (for USB recovery boot)
- If encryption is disabled
- signed bootloader
- If TrustFence is disabled
- non-signed bootloader
It also treats the ccimx6ul special, as this has a dedicated file for
USB recovery boot.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9698
There are several recipes in meta-digi related to features that we haven't
tested in a long time and don't appear in the DEY 5.0 documentation. Remove
them to avoid unexpected behavior.
Said features are:
* Coral TPU support (only supported in DEY 3.2)
* AWS support (removed from default images and docs in DEY 4.0)
* dey-image-tiny (hasn't been maintained since DEY 2.0)
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
* Set the OP-TEE base address to 0x7e000000 (32MiB below the first gigabyte
of DDR).
* Update the ATF and OP-TEE memory maps to support up to 4GiB DDR.
This ensures OP-TEE runs reliably across all ccimx8mm memory configurations.
https://onedigi.atlassian.net/browse/DEL-9502
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also, add the wifi driver patch and binaries included in
NXP's incremental release to fix the issues on release
'lf-6.6.52-2.2.0'.
https://onedigi.atlassian.net/browse/DEL-9417
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Update to 5.9.4.1 version following 'lf-6.6.52_2.2.0' NXP release.
This has not been released in meta-freescale yet, so reuse the 5.9.4
recipe and apply the changes from meta-imx.
https://onedigi.atlassian.net/browse/DEL-9417
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
imx-boot includes the 'imx-mkimage_git.inc' from meta-freescale, so
redefine the SRCBRANCH and SRCREV for every platform in the bbappend.
https://onedigi.atlassian.net/browse/DEL-9417
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Our distribution is Digi Embedded Yocto (DEY), so use that to mark the
upstream status of the patches in our layer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The way tagged imx-boot images are handled in meta-freescale was changed in
commit 161f1b3e69a3cf011a50e9b742fb8c46d61e41e8. Reflect this in our recipe by
using the same overrides as uuu_bootloader_tag.bbclass to disable the
functionality
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This variable was removed from the base imx-boot recipe in meta-freescale
commit c30f12b809a8cf36043b42c67dd8a11f69d9cf77, as it was never being
overridden and always had a value of "imx-boot".
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
In meta-freescale commit 4d64dde1686a017ebe2763dd7880563a6fc51b53,
compile_mx8m() was modified to account for possible configuration suffixes in
the dtb filename via the creation of a symlink. In our case, the filename is
the same as the target, causing the dtb to get replaced with a dead symlink.
For now, revert this function to how it was in the kirkstone branch of
meta-freescale to avoid this.
https://onedigi.atlassian.net/browse/DEL-9011https://onedigi.atlassian.net/browse/DEL-9081
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Since our recipes handle native builds differently, port the latest version
of the recipes from meta-freescale to our layer while keeping our
customizations. Use the same revision for all platforms.
Adapt patches for lf-6.6.23-2.0.0 release and add the "Upstream-Status" tag to
them to avoid QA errors.
For now, use the imx-boot recipe from meta-freescale, but there's a chance we
might need to port the version of the recipe in meta-imx.
https://onedigi.atlassian.net/browse/DEL-9011https://onedigi.atlassian.net/browse/DEL-9081
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Back in Yocto 4.0, we applied some imx recipe changes exclusively for the
ccimx93 from meta-imx's rel_imx_6.1.55_2.2.0 tag, but now these changes have
been upstreamed in the meta-freescale scarthgap branch. Since there currently
isn't an NXP BSP based on scarthgap, make all platforms use the upstreamed
versions of the recipes, which are the same versions or newer as the ones
available in meta-imx
Remove the recipes for:
* firmware-ele-imx
* gstreamer1.0-plugins-bad
* gstreamer1.0-plugins-base
* gstreamer1.0-plugins-good
* gstreamer1.0-plugins-good
* gstreamer1.0-plugins-ugly
* gstreamer1.0
* imx-atf
* imx-boot-firmware-files
* imx-codec
* imx-g2d-samples
* imx-m33-demos
* imx-m4-demos
* imx-m7-demos
* imx-parser
* imx-pxp-g2d
* libdrm
* linux-imx-headers
* optee-test
* wayland
* wayland-protocols
* weston
* xwayland
Apply these changes:
* Remove ccimx93-exclusive changes in gstreamer1.0-meta-base
* Modify imx-gst1.0-plugin bbappend so the upstream version is used in all
platforms
* Remove imx-alsa-plugins bbappend so the upstream version is used in all
platforms
* Remove firmware-nxp-wifi bbappend since the files we need to install seem
to already be included in the meta-freescale recipe
* Remove imx-test and imx-lib bbappends since our custom changes have
already been included in the meta-freescale recipes
https://onedigi.atlassian.net/browse/DEL-9011https://onedigi.atlassian.net/browse/DEL-9081
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commits adds the CCMX91 platform to the DEY
build system. Furthermore, it creates generic ccimx9
support to be used for the CCiMX91 and CCiMX93
platform.
https://onedigi.atlassian.net/browse/DEL-9106
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
The patches have been backported from the lf-6.1.36-2.1.0 release of
imx-mkimage.
https://onedigi.atlassian.net/browse/DUB-1081
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Starting with NXP release "lf-6.1.55-2.2.0" the IMX optee fork (based on
version 4.0.0) does not support SOC revision A0. This commit recovers
support to build a bootloader for A0, extending the optee patch for
ccimx93 to support A0 with a build time option, and then extending the
optee-os and imx-boot recipes to build two optee binaries and using them
to generate bootloaders for both SOC revisions.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This includes also an update and rename of the Edgelock Enclave firmware
package (firmware-ele-imx).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
In commit 2fd1dbfed7, we accidentally removed some changes needed to
build imx-boot with Trustfence enabled, which were added in commit
1ce17da864.
This partially reverts commit 2fd1dbfed7
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
New NXP's release is based on upstream v2.8. Use this only for ccimx93,
and keep using the previous Kirkstone release (based on upstream v2.6)
for the rest of the platforms.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Javier Viguera
Hector Palacios
Gabriel Valcazar
Gonzalo Ruiz
Mike Engel
Isaac Hermida
David Escalona
Francisco Gil