Commit c24d1d96 ("sysinfo: adapt script after removal of deprecated fsl_otp
driver") introduced support to determine if a device is closed by checking
a new boolean property on the DT for the CC8X platforms, however the CC8M
platforms use the same mechanism. This commit modifies the sysinfo script to
check also the DT for the CC8M platforms.
https://jira.digi.com/browse/DEL-7263
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Commit cbb38440 ("meta-digi-dey: sysinfo: Add chip revision sysinfo output")
introduced a new script variable to determine the SOC revision of the module.
However this entry only is available on the CC8X platforms. This commit checks
if the entry exist and then tries to read it to avoid unexpected issues with
devices without this entry.
https://jira.digi.com/browse/DEL-7263
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This version includes changes needed to reflect the OTP driver update in the
kernel.
https://jira.digi.com/browse/DEL-7261
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit adds new environment variables to support QT with wayland and
to fix the following error message when executing QT5 applications on the
target.
qt.qpa.plugin: Could not find the Qt platform plugin "eglfs" in ""
This application failed to start because no Qt platform plugin could be initialized.
Reinstalling the application may fix this problem.
Available platform plugins are: minimal, offscreen, vnc, wayland-egl, wayland, xcb.
Aborted.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
This commit updates the GPIO udev rules to change the group owner
and permission of the new gpio char driver. This will allow users
that belong to the digiapix group to access the char driver.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-7255
This package was being included as a RRECOMMENDS from libcrypto, but we don't
need it in the initramfs at all. Since our recovery image is already pretty big
compared with the recovery partition size on ccimx6ul platforms with 256 MB of
storage, remove it to make sure the image can fit.
https://jira.digi.com/browse/DEL-7253
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Add systemd auto-getty.service to run agetty on the console defined in the
kernel command line on platforms with systemd support.
This service replaces serial-getty@.service as the one responsible for
opening a tty port and prompting for a login name when
TRUSTFENCE_CONSOLE_DISABLE is configured.
https://jira.digi.com/browse/DEL-7242
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
We have specific scripts per platform to export the qt5 environment variables,
because using the default backend-specific scripts ported from the meta-imx
layer results in mismatches in specific cases (for example, 6UL framebuffer
images only support linuxfb, but the qt5-fb.sh script exports eglfs instead).
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We originally ignored the weston-init.bbappend in meta-freescale back in thud
because we were basing our recipe off of NXP's sumo BSP, and NXP's weston-init
customizations were incompatible with the ones in meta-freescale. Remove it
from the BBMASK to be able to incorporate the customizations in meta-freescale.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The ccimx6 uses the g2d weston renderer to avoid graphical glitches, but the
default renderer code doesn't handle suspend/resume cycles properly, causing
other issues (notably in the framerate and the desktop not showing 66% of the
time when resuming from suspend). Add a patch to mitigate these issues.
https://jira.digi.com/browse/DEL-7236
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Without this option, moving any element on the desktop (cursor or windows) will
cause an undesired "trailing" effect, where parts of the moved elements remain
on the desktop.
https://jira.digi.com/browse/DEL-7221
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This workaround is no longer needed since ccimx6/6qp now use Linux v5.4
https://jira.digi.com/browse/DEL-7221
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Recipe from poky layer only provides the native support
but to generate the sdk we need also the nativesdk.
https://jira.digi.com/browse/DEL-7200
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This package needs to be installed in the rootfs for the demos to work.
While at it, mark this change as Digi-specific to avoid removing it in future
recipe updates.
Reported-by: Alfonso Martin Rey <alfonso.martinrey@digi.com>
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
(cherry picked from commit 07f1fa88f2)
This commit removes the v4l2 example because they are superseded
by gstreamer examples.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-7211
The old fsl_otp driver is deprecated and we need to determine
if the device is closed using a new property of the device tree
called 'digi,tf-closed'.
Assume the device is open if the property is not found.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7185
(cherry picked from commit fc1a736758)
- OTP section
- Use just one fixed path to the OTP nvmem device descriptor (instead
of a loop).
- Use '-v' for dumping all values with hexdump.
- TrustFence section
- For cc8x, determine if the device is closed by checking a new boolean
property on the DT: digi,tf-open|closed
- For the rest, check the SEC_CONFIG[1] bit using the new nvmem
descriptor.
- Change log from 'Device status' to 'Security status'
- Report UNKNOWN if nvmem device does not exist.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7185
(cherry picked from commit f6a8de0067)
The old fsl_otp driver is deprecated and we need to determine
if the device is closed using a new property of the device tree
called 'digi,tf-closed'.
Assume the device is open if the property is not found.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7185
- OTP section
- Use just one fixed path to the OTP nvmem device descriptor (instead
of a loop).
- Use '-v' for dumping all values with hexdump.
- TrustFence section
- For cc8x, determine if the device is closed by checking a new boolean
property on the DT: digi,tf-open|closed
- For the rest, check the SEC_CONFIG[1] bit using the new nvmem
descriptor.
- Change log from 'Device status' to 'Security status'
- Report UNKNOWN if nvmem device does not exist.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7185
By default, we generate SWU files which update both the linux and rootfs
partitions. This, along with the fact that platforms using NAND as the storage
media require a reboot for the rootfs partition's "enc" flag to take effect,
makes it safe to format the NAND's rootfs partition before performing an
update, regardless of having to encrypt the rootfs or not.
However, customers that wish to use the swupdate feature to update just the
linux partition will find that the rootfs is completely erased after the update
is finished, because a new rootfs hasn't been written in its place.
To avoid this scenario, parse the SWU package's description to verify that it
contains a rootfs image before formatting the partition.
https://jira.digi.com/browse/DEL-7067
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Upgrade GST version from 1.16.0 to 1.16.1
The headerfix.patch in gst-plugins-good needes to be removed
as these changes are already included in 1.16.1
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
This commit updates the imx-gpu-viv to the next version.
It includes the following improvments and fixes
* The work-around that moves .so for OpenCL, OpenVX, and Vulkan
to the main packages triggers the QA Issue for dev-so:
ERROR: imx-gpu-viv-1_6.4.0.p2.4-aarch64-r0 do_package_qa:
QA Issue: non -dev/-dbg/nativesdk- package contains symlink .so:
libvulkan-imx path '/work/aarch64-mx8m-poky-linux/imx-gpu-viv/1_6.4.0.p2.4-aarch64-r0/packages-split/libvulkan-imx/usr/lib/libvulkan_VSI.so' [dev-so]
Suppress the QA check.
* Add versions for OpenCL, OpenVX, and Vulkan.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
This commit removes the mesa-gl_%.bbappend file because that latest version
of the recipe is available in the zeus branch of meta-freescale.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Arturo Buzarra
Gabriel Valcazar
Mike Engel
Gonzalo Ruiz
Hector Palacios
Mattias Lindblad
Francisco Gil Martinez