U-Boot has been able to boot kernel zImage for a long time so make this
the default kernel image.
For the CC6 we still want to use uImage for compatibility reasons.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5237
This commit adds the recipe to update the GPU driver
to the latest version.
https://jira.digi.com/browse/DEL-5234
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds the recipe to update the Vivante GPU
driver to the latest version and refresh patches.
https://jira.digi.com/browse/DEL-5082
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add initial support for Digi's ConnectCore 6 QuadPlus SBC.
The ccimx6qp platform has the QCA6564 chip instead of the
other Atheros chips and included the Atmel ECC508A cryptographic
chip.
https://jira.digi.com/browse/DEL-5082
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
- Added the new image type 'recovery.vfat' to the DEY images
generation process. This new image is a clone of the 'boot.vfat'
but including the recovery ramdisk and the recovery boot script.
- Added the new image type 'recovery.ubifs' to the DEY images
generation process. This new image is similar to the 'boot.ubifs'
but including the recovery ramdisk and the recovery boot script.
Signed-off-by: David Escalona <david.escalona@digi.com>
There are different SBC boards IDs each one having a different
device tree file in the form imx6X-ccimx6sbc-idZZZ.dtb, where:
X is the CPU family (q=Quad/Dual, dl=DualLite/Solo).
ZZZ is the board ID number.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2160
That's the u-boot configuration used by variants 0x07 and 0x09, which
have been cancelled and are no longer supported by DEY.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* Merge u-boot-dey-rev_2015.04.inc into the recipe. There is no need to
split the recipe, as there is no other recipe using this u-boot code.
* Update uboot configurations to the new format '_defconfig'. Also add
the new 2GB variant.
* Remove PREFERRED_VERSION_u-boot-dey for CC6, as there is only one
version available for this platform.
https://jira.digi.com/browse/DEL-1829
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Linux 3.10 is still available via project's local.conf.
PREFERRED_VERSION_linux-dey = "3.10"
KERNEL_DEVICETREE = "..."
https://jira.digi.com/browse/DEL-1748
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is needed in the context of CC6 variants 0x7 and 0x9 (EMMC-less).
Changes:
* Do not use 'meta-fsl-arm' image generation class: removed include and
override SDCARD generation function
* Use same VFAT boot image for EMMC and SD card. The u-boot bootscript
has been adapted to be able to boot Linux from both SD and EMMC.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 8b8456b8fd90facd92dfc87632effa582ca60475)
This will allow in following commit to use the same VFAT boot image for
EMMC and SD. Until now we were creating different boot images for EMMC
and SD card images.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 13e9ec7608d42430c2a01a728d030752a71f7948)
Use Yocto's UBOOT_CONFIG new functionality to select the u-boot
configuration to build.
https://jira.digi.com/browse/DEL-1584
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove the current DEY variants support and framework for CC6 because in
following commits we will add support for all *hardware* variants in
just one set of DEY images for CC6.
https://jira.digi.com/browse/DEL-1569
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The IMAGE_FSTYPES variable for ccimx51js and ccimx53js was not correct,
it was taking the default one from Poky (IMAGE_FSTYPES="tar.gz")
instead of the one in 'imx-digi-base.inc' file. This happened because we
were using the weak '??=' assignement while the default in Poky was
using '?='.
Also rework a bit how this variable is set, so it is easily overriden on
project config files or initramfs recipes.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This completes the support for ccimx6sbc variants:
* support device tree variants
* split variants '0x01,0x02,0x04' group in two different groups (with or
without kinetis)
https://jira.digi.com/browse/DEL-1359
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 3f20015411f4e270b2e2c8faf292678c75ff2aff)
The i.MX6 has an internal PMU with LDOs to supply voltages to the different
ARM sybdomains. There are two possible configurations, to use this internal
LDOs or to use the external PMIC to supply the voltages (LDO bypass).
The default is to boot with LDO bypass, and the device tree with the -dts
suffix will boot with the i.MX6 internal LDO.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
In Yocto 1.7 meta-fsl-arm replaced udev-extraconf bbappend with a new
package (udev-rules-imx). So we need to adapt our own bbappend to these
changes so all the needed udev rules are in place.
https://jira.digi.com/browse/DEL-1336
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Hector Palacios
Arturo Buzarra
David Escalona
Alex Gonzalez
Javier Viguera