By removing the driver on ifdown and loading it on ifup we workaround some
problems found in long run suspend stability testing.
https://jira.digi.com/browse/DEL-1084
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This updates the driver to upstream AR6003-ISC-v3.4p6-b3.4.0.225.
https://jira.digi.com/browse/DEL-1127
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This adds the calibration file for US regulatory (still missing the
world-regulatory calibration file)
https://jira.digi.com/browse/DEL-1102
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Needing to set the branch where a specific SHA1 revision is contained is
a unnecessary constraint that can be bypassed setting 'nobranch=1' in
the SRC_URI.
We do that for all the external repos (GitHub) plus the internal ones
for the im-xbootlets and the atheros kernel module (as those two repos
are stable enough and we are not developing actively on them).
For U-Boot and Linux we keep the SRCBRANCH framework for internal repos
as this is needed for the AUTOREV yocto feature.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Starting with Yocto 1.6 there is a need to configure in which branch a
specific SHA1 revision is included. We need a framework to set such
branches both for internal git repos and for external ones (Github).
If the branch is not specified in the SRC_URI, the do_fetch task may
fail even though the SHA1 revision exists in the repository.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Otherwise building Yocto 1.6 for ccardimx28js fails with:
ERROR: Logfile of failure stored in:
/home/jviguera/projects/yocto/master/gui/ccardimx28js/tmp/work/ccardimx28js-dey-linux-gnueabi/kernel-module-atheros/1.0-r1/temp/log.do_fetch.38442
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Fetch the source from the dey-1.6/maint branch which contains a fix
for a kernel oops introduced by the Yocto GCC 4.8.1 compiler.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Version v3.4p6 seems to have some problems with WEP encription. Version
v3.4p4 seems to work better with WEP, so revert to that version.
https://jira.digi.com/browse/DEL-843
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Not well supported yet and cleans a debug line:
ath6kl: ath6kl_cfg80211_connect: sme->mfp = 0
https://jira.digi.com/browse/DEL-815
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Most SRC_URI defaults to DIGI_LOG_GIT. This patch sets a more generic
name (DIGI_GIT) that defaults to DIGI_LOG_GIT, but is configurable by
someone who might want to tune it (DIGI_MTK_GIT, etc.).
Signed-off-by: Seth Bollinger <sethb@digi.com>
If people are creating derivative machines in their layer, make
COMPATIBLE_MACHINE more flexible. Use SOC_FAMILY instead of specific
machine types. This allows users to more easily share these recipes.
https://jira.digi.com/browse/DEL-676
Signed-off-by: Seth Bollinger <sethb@digi.com>
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
In Linux 2.6.35, the kernel module accepting the parameters on load
was 'ath6kl_sdio' while in 3.10 is 'ath6kl_core'.
So we need to apply the load parameters to either module depending on
the kernel version.
This is solved by configuring the modprobe configuration file
'/etc/modprobe.d/atheros.conf' with the parameters to the correct
module instead of passing them in the command line.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
With the old version of the kernel (2.6.35) we build an external atheros
kernel module, while with the new kernel (3.10) the atheros driver is
included with the kernel sources.
However, the new driver needs the firmware files and the driver load
scripts that are stored with the old driver.
So put a dependence on kernel-module-atheros regardless of the kernel
version and then rework the kernel-module-atheros recipe to build the
whole driver for the old kernel or only the firmware for the new kernel.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
ERROR: Fetcher failure: Unable to find file file://atheros anywhere
The FILESPATH variable (used as the search path for files referred to
in SRC_URI) is now (dylan) more restrictive, so move the files where
they can be found.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The public branches of those repositories have been cleaned up so
the external sha1s have changed.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Fix the kernel wireless configuration fragment, and add a couple of kernel
patches to set up the mmc0 interface to be used with the wireless and
remove an incorrect pin configuration.
There are similar patched to this on the gateways/master branch related to
the vehicle bus adapter product.
meta-digi-arm/conf/machine/cpx2.conf
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This manually reverts commit ecfdf6ae23.
Once mdev was removed as a dependency from del-image-graphical, we need
udev to load the firmware files for the wireless drivers. This job was
being done by mdev.
The reason for the commit in the first place was that both mdev and udev
were attempting to load the firmware files, so we changed the udev
rule to ignore the atheros driver. This was only needed when mdev and
udev were both running.
https://jira.digi.com/browse/DEL-450https://jira.digi.com/browse/DEL-450
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This version of the driver can be redistributed, so remove the
build-from-objects part of the recipes.
https://jira.digi.com/browse/DEL-412
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Alex Gonzalez
Javier Viguera
Seth Bollinger