Crank storyboard engine has runtime dependencies on libELG.so and
libGLESv2.so, which usually are just symlinks that go to the "-dev"
package. As they are needed at runtime, move the files to the normal
(not -dev) package.
Also add explicit RPROVIDES for those libraries, as otherwise the build
fails with:
QA Issue:
/usr/share/crank/sbengine/plugins/librender-plugin-opengles_2.0.so
contained in package crank-sbengine requires libEGL.so, but no providers
found in RDEPENDS:crank-sbengine? [file-rdeps]
QA Issue:
/usr/share/crank/sbengine/plugins/librender-plugin-opengles_2.0.so
contained in package crank-sbengine requires libGLESv2.so, but no providers
found in RDEPENDS:crank-sbengine? [file-rdeps]
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Although in theory, you can use any label to name the different u-boot
build configurations, we have them coupled to machine names in the
boot-artifacts bbclass, and also in the default boot artifact filename
in the firmware installation scripts.
So fix that up for the ccimx93 in the machine config, and create the
proper symlinks in the do_deploy imx-boot recipe.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This variable was removed from meta-st-stm32mp so we need to get rid of it
in meta-digi, too.
Reported-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8268
Both recipes (imx-boot and imx-mkimage) use the same source code
repository, so update both of them to the new NXP release, by copying
with minimal changes the recipes in meta-imx.
Also convert the original 'imx-mkimage' recipe, which was only for
native class, to a full target, native, nativesdk recipe. We need this
to be able to include the nativesdk one in our toolchain.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
For this platform the bootable artifact is imx-boot based, so configure
some variables accordingly.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Rework the "build_uboot_scripts" to prevent changing the templates in
the WORKDIR, as those are part of the SRC_URI. Instead, change the
deployed scripts by using "sed" and redirection.
Also, removed UBOOT_HAS_FASTBOOT altogether, as there is no platform
that does not support fastboot.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of overriding the whole do_compile function, just to reconfigure
u-boot for Trustfence, create a do_configure pre-function that takes care
of that. This allows the removal of duplicated code.
Also, disable the generation of u-boot environment artifacts. We are
not using them and so many u-boot artifacts in the deploy directory
are confusing.
Finally, adjust the names of the TF u-boot artifacts in the do_deploy
append function.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also enable recipe for ccimx93, and pass the correct DTC flags to create
overlays capable DTBs.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also:
* Support ccimx93
* Add all the patches regardless of the platform (remove overrides). The
patches do not clash, so adding all of them eases the maintanance and
the migration to new versions of the imx-atf.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These are just a verbatim copy of the ccimx8mm ones, so the project is
buildable. This file list should be revisited and adapted for the
ccimx93.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use += operator to prevent resetting the value of the EXTRA_IMAGEDEPENDS
variable. That is how it's mostly used elsewhere.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is later overridden in the machine config files, but a default
(not empty) value is needed, to prevent a syntactic error in
init-ifupdown recipe (where it is used).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The poky recipes were updated on the minor version to 1.20.4
but the bbappends were 1.20.3 specific so they did not apply.
Use a wildcard to have them apply even if the minor version
changes upstream.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
(cherry picked from commit 0c73b31cf5)
The poky recipes were updated on the minor version to 1.20.4
but the bbappends were 1.20.3 specific so they did not apply.
Use a wildcard to have them apply even if the minor version
changes upstream.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This allows the user 'weston', which is running the video
backend, to access files on external media, such as USB
disks and microSD card.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8208
In the past, this file was cloned from poky to skip mounting
an already mounted device. This condition was done on poky's
version so the cloned file is no longer needed.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
A new set of meta-freescale updates broke our layer, because they
updated opencv package and our bbappend does not apply anymore.
The build fails at parsing:
ERROR: No recipes in default available for:
meta-digi/meta-digi-dey/dynamic-layers/freescale-layer/recipes-support/opencv/opencv_4.5.2.imx.bbappend
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This allows users of the layer to override the value with a different
default. Same change was done in meta-freescale's imx-base file.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Artifact encryption is now supported for ccimx8mn and ccimx8mm.
This reverts commit 1134e4c07c.
https://onedigi.atlassian.net/browse/DEL-7915
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit 588005bb4b2200e79b180f77671304d9c5bdf509)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
When read-only feature is enabled, the rootfs should be .squashfs
and not .ubifs.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
(cherry picked from commit c32278af74cea8cb38aa81590eaa867be1c739c9)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add configuration 'BUILD_UBOOT_SCRIPTS' to select whether to build the
boot and install scripts or not, and set it to 'true' by default.
This allows removing the scripts on upper Yocto layers.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
All the dualboot logic will be checked in run time.
To do this:
* Include the altboot.src by default in all the images
* Create a post installation script to change the
firmware_download_path in the cloud connector
* Unify the swupdate file descriptor for dual and single boot
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
This commit removes duplicated and unused build artifacts for the ccmp1
platforms. Also fixes a build warning related with flashlayout config file.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit fixes the issue in Jira
https://onedigi.atlassian.net/browse/DEL-7827 (and in GitHub
91bfa01a52#),
that is being manifest again in a CC6UL with 1GB although it may affect other
hardware.
Partitions are mounted:
* For multi-MTD systems, when an MTD subsystem event is received.
* For single-MTD systems, when a UBI subsystem event is received.
This commit avoids process UBI subsystem events in multi-MTD systems.
The automount rules filter UBI subsystem events to only process 'ubi0*' (the
only UBI device/volumes in a single-MTD) and then the executed script
'mount_digiparts.sh' checks for the existance of '/dev/ubi1' node to consider
the system multi-MTD instead of using 'singlemtdsys' U-Boot variable that only
exists on CC6UL.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
* Use 'MOUNT' variable instead of 'mount' command
* On the MTD subsystem event, stop looping once the UBI device number is found
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
This override is used in STM BSP layer on some recipes. Adding it to our
machines fix a build failure on the gcnano-driver-stm32mp recipe.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Increase the timeout from 90 to 120s since it's a large image
and it may take more time on different NANDs.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The U-Boot environment resides on a UBI volume. The uuu script
relies on the environment to save part of the commands that
U-Boot needs to execute after reboot in the middle of the
installation. If the UBI volume 'uboot_config' does not exist
the installer fails.
This commit:
- Creates a function -on the uuu script only- for obtaining
the result of running any U-Boot command (0=success, 1=error).
- Checks the existance of 'uboot_config' volume.
- Runs 'ubivolscript' script to create the UBI volumes layout
that generates the environment volume if it doesn't exist.
- Increases the timeout for running the 'ubivolscript' since
there are occasions in which 'ubi part' (which is part of the
script) takes more time (if it cannot find the fastmap).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Commit b8d46f01 ("read_only: create folders in build time") creates
unconditionally default folders in spite of we are in a read-only filesystem or
not, however there are different models (dual boot, single boot..) where these
partitions exist or not, so this commit only creates these default partitions
for a read-only filesystem.
https://onedigi.atlassian.net/browse/DEL-8193
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit allows to mount only the linux partition active in read-only mode.
https://onedigi.atlassian.net/browse/DEL-8193
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
According to udev documentation running programs that access to mount/umount
filesystems is not allowed due to the default sandbox that is enforced on
systemd-udevd.service, so on systemd systems we must to use systemd-mount
binary instead of mount. Also systemd-mount does not support mount ubi devices
by volume name, so we need to use the absolute device path.
https://onedigi.atlassian.net/browse/DEL-8193
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds the extra machine specific configuration files for udev on
ccmp1 platforms to allow, for example, automount storage devices.
https://onedigi.atlassian.net/browse/DEL-8193
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit changes the arm-trusted-firmware build configuration to only build
one ATF artifact.
It will create an image that boot over USB and NAND.
https://onedigi.atlassian.net/browse/DEL-8187
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
By default ccmp1 platforms have dualboot mode by default, however the required
boot script was added to ccmp15 platform only, so this commit fixes it.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The first time the 'dualboot' variable is tested it is directly run in
the script and doesn't need to escape the special characters.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
When Dual Boot is not enabled, 'rootfsvol' variable must point to the
single boot system rootfs partition 'rootfs'.
Explicitly set this value. Otherwise the script relays on the default
rootfsvol value, which may be a Dual Boot partition.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
meta-freescale updated the base recipe and that broke the build:
ERROR: No recipes in default available for:
meta-digi-arm/dynamic-layers/freescale-layer/recipes-bsp/firmware-imx/firmware-imx_8.16.bbappend
The differences in our bbappend are simple enough that we can make a
version agnostic bbappend.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Set 'UBOOT_HAS_FASTBOOT=true' on CCMP1 platforms and therefore add the
UUU installation script to the installer ZIP file.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
For platforms with a FIP artifact, ignore U-Boot artifacts and instead
add to the installer zip file the FIP artifact and the ATF artifacts.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
- create dualboot.bbclass that
- sets DUALBOOT_ENABLED variable
- defines partition names and function for changing the sw-description
for swupdate
- move files from layer into meta-digi
https://onedigi.atlassian.net/browse/DEL-7962
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
On the CCMP1 SOMs, we only consider a single system partition called UBI,
with many UBI volumes.
The variable 'singlemtdsys' allowed to change between this and
a system with multiple MTD partitions with one UBI volume each
(old approach on CC6UL).
This commit removes the variable and uses the logic as if it was set.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Use the latest 2AE NVRAM file from the master branch. This file improves
the EVM performance for the 2AE murata module.
MD5SUM:
- cyfmac4373-sdio.2AE.txt: 6301804650847946c79797387eda9c7a
https://onedigi.atlassian.net/browse/DEL-7936
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Add extra configuration 'CFG_STM32_BSEC_WRITE=y' to the make line to
enable OTP write support.
https://onedigi.atlassian.net/browse/DEL-8074
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
These are available in 'meta-freescale'.
The only difference is that meta-freescale's recipes deletes de SDMA
firmware so the generic one provided by linux-firmware package is used.
We create a minimal bbappend to use the NXP provided SDMA firmware.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also clean some dead code: libjpeg-turbo is the only jpeg implementation
in poky since long ago. Also "remove-libtool" is enabled by default in
bitbake so there is no need to do it in our distro configuration.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit adds Bluetooth Vulnerability CVE-2019-9506
resolution to the firmware file.
CVE-2019-9506 is a Bluetooth key negotiation vulnerability.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://onedigi.atlassian.net/browse/DEL-7134
Co-authored-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The qualcomm.sh script has been losing functionality over time, to the
point that now is just loading the kernel module using 'modprobe'.
Instead, run modprobe directly from the udev rule and get rid of the
qualcomm script.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Reset the FW files to release r00006.3.470144.2a
Verbatim copy of the recipes in DEY-3.2, using command:
git restore -s dey-3.2/master -- meta-digi-arm/recipes-bsp/firmware-qualcomm
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Verbatim copy of the recipes in DEY-3.2, using command:
git restore -s dey-3.2/master -- meta-digi-arm/recipes-kernel/kernel-module-qualcomm
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Explicitly set this variable to keep some necessary scripts in /etc/init.d and
set a "softer" assignment to allow override it.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
For development this would not be needed as it points to AUTOREV, but
for releases we need to specify the SHA1 revision, and this recipe
builds two different branches (for NXP and STM platforms), so we need a
place to define two different revisions.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The recipes have been updated in meta-freescale, and version 1.18.5.imx
is no longer available.
Follow same change in meta-freescale's "conf/machine/include/imx-base.inc".
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The crank storyboard engine is provided in binary format. The RPM
package manager that creates the rootfs needs and explicit runtime
provider for 'libEGL.so', which in the ccmp15 is provided by the
'libegl-gcnano' runtime package.
Fix build failure:
--> Finished dependency resolution
Error:
Problem: package packagegroup-dey-crank-1.0-r0.0.ccmp15_dvk requires crank-sbengine, but none of the providers can be installed
- conflicting requests
- nothing provides libEGL.so needed by crank-sbengine-7.1-r0.3.ccmp15_dvk
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The modalias changed as part of the kernel update to version 5.15.
See commit dd545833b773b20aa7cec10f89bff96014ccb64f in kernel tree.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This fixes a failure in the firmware installation script when trying to
program crank images:
./install_linux_fw_uuu.sh -i dey-image-crank
[ERROR] Could not find file 'dey-image-crank-ccimx6ulsbc.boot.ubifs'
[ERROR] Could not find file 'dey-image-crank-ccimx6ulsbc.recovery.ubifs'
[ERROR] Could not find file 'dey-image-crank-ccimx6ulsbc.ubifs'
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
For the CC6UL 1GB flash variant, the programming of the rootfs exceeds
the current 90 secs timeout, giving following failure:
[Bulk(R):LIBUSB_ERROR_TIMEOUT] fb[-t 90000]: ucmd update rootfs ram ${fastboot_buffer} ${fastboot_bytes} -e
Error: Bulk(R):LIBUSB_ERROR_TIMEOUT
Increase the timeout to prevent the failure.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We don't want the FIPS version of wolfssl to be used by default, so
the recipe is configured as:
DEFAULT_PREFERENCE = "-1"
Unfortunately, DEFAULT_PREFERENCE has lower precedence than the layer
priority, so we need to put the recipe in a layer with priority less
or equal to the other layers having wolfssl recipes (meta-openembedded,
meta-wolfssl). This means in our case using 'meta-digi-arm' instead of
'meta-digi-dey', in which conceptually would fit better.
https://onedigi.atlassian.net/browse/DEL-8036
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Base recipe in Poky has been updated to that version, so we need to
update the bbappend to prevent a bitbake parsing failure.
NOTE: to review the patches once they are updated in
'meta-st-openstlinux'.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
meta-freescale updated to version '10.0.0.imx', so our bbappend fails
with:
ERROR: No recipes in default available for:
... meta-digi-dey/dynamic-layers/freescale-layer/recipes-graphics/wayland/weston_9.0.0.imx.bbappend
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The qualcomm.sh script has been losing functionality over time, to the
point that now is just loading the kernel module using 'modprobe'.
Instead, run modprobe directly from the udev rule and get rid of the
qualcomm script.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
As that's an old VM with limited specs, there is no much gain on using
it over the canonical Stash repositories that justifies the code
overhead and the possible errors due to synchronization problems.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The SRCREV may change depending on the version of the kernel, so it
cannot be a common variable for all kernel versions.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use the canonical Stash repository to avoid synchronization problems
between the repo and the mirror.
Moreover the LOG mirror is hosted in an old VM machine with limited
specs, and although the transfer of the objects is faster, the counting
of the objects to transfer (which is done in the server) takes ages to
complete, so at the end, there is no time gain using the mirror.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Not needed anymore in our layer, as this has been fixed in meta-st-stm32mp.
This reverts commit 786e5c9e56.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Commit 8cba3aaefb in 'meta-freescale' changed the kernel_localversion
function we are using in our kernel recipe. This leads to a not-properly
configured kernel build, where CONFIG_MODULES is disabled. That
config option is needed to build external kernel modules in other
recipes, so those recipes (kernel-module-qualcomm, cryptodev-module,
etc) fail to build.
The commit makes sure the kernel is properly configured for building by
extending the do_configure function in a "prepend".
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
By default STM layer creates extra partitions, the vendorfs partition is
reserved to save custom STM libraries and binaries, however the ccmp15 platform
does not have this additional partition, and stores all the libraries in the
rootfs.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
gstreamer recipes was updated to v1.20.3 in poky layer, so this commit updates
the recipe version for custom bbappends.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
weston recipe was updated to v10.0.1 in poky layer, so this commit updates the
recipe version and refresh a custom STM patch.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the required firmware binaries for bluetooth and wireless
interfaces, based on the release imx-hardknott-drogon_r1.0 (Wireless firmware
v13.10.246.265)
https://onedigi.atlassian.net/browse/DEL-8021
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Building a toolchain/SDK fails for ccmp15-dvk, because the NXP-based
trustfence tools (for example the cst) are not available. Fix the build
by filtering out those tools when the build platform is not NXP based.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It's just a waste of space as we already have the kernel image in the
'linux' partition and that gets mounted under /mnt/linux.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The recipe fails to build for the target, but that is expected, as this
is a tool you need to run in the host or from the toolchain/SDK, so
rework the recipes to restrict only for native and nativesdk.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Yocto 4.0 only supports OpenSSL 3.0.x while NXP's CST (code signing
tool) is still using OpenSSL 1.1.x. So the build fails when using the
Yocto-build OpenSSL. Instead, build OpenSSL 1.1.1 as part of the build of
the CST and link statically against libcrypto, so the resulting binaries
(cst, srktool) do not depend on any specific OpenSSL version installed
on the development computer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
In order to perform the standalone signature process, it was required
to rebuild the Toolchain with Trustfence support enabled.
CST source code is now available for downloading in the Digi FTP, so add
Trustfence sign scripts and cst/srktool to the default toolchain for it
to be used for standalone signature without rebuilding.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit 2c9b721fb9ce38dcd0034e22d95db6e0ee068955)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The enable p2p patch add support for enabling p2p as module parameter setting
it by default to false.
The cfg80211 netdevice fixes the registration of virtual interfaces for kernels
v5.12+.
https://onedigi.atlassian.net/browse/DEL-7986
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Also, fix the sequence number of the GPIO_SET_DEBOUNCE_IOCTL ioctl. Same
fix has been done in Linux.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 16eded4f0edcc603de83be7155f7c09718ba5ddd)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove deprecated versions of recipes updated in other general layers
(poky, meta-openembedded). Also remove duplicated IMX specific recipes that
are available in other BSP layers (meta-freescale, meta-fsl-demos, etc).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
An outdated 'mesa' bbappend on meta-st-stm32mp is making mesa package
fail to build, due to incorrect configure options.
mesa-22.0.0/meson.build:614:2: ERROR: Problem encountered: kmsro requires dri3 for X11 support
Override the build configuration in our layer until the bbappend gets
fixed in ST layer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Yocto is becoming more strict on not using tags in the SRCREV, as that
may lead to problems in the different tasks of a bitbake recipe.
As of Yocto 4.0, bitbake errors when such condition happens, with:
"Recipe uses a floating tag/branch without a fixed SRCREV"
So convert the SRCREV of all tags to the proper SHA1 revision.
Also, extend the 'fix-build-issues' to delete '-Werror' from the
compilation flags. Newer versions of GCC (as the one used in Yocto 4.0)
throw more (new) warnings, and the '-Werror' flag was making the build
to fail.
cc1: all warnings being treated as errors
lim_api.c:1057:17: error: this 'if' clause does not guard... [-Werror=misleading-indentation]
lim_admit_control.c:169:17: error: this 'if' clause does not guard... [-Werror=misleading-indentation]
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* fix arch tune files path in machine config
* update imx-digi-base config file (using as a base the imx-base.inc
config file in 'meta-freescale')
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
By default, the STM layer includes several tools in the SDK, one of which is
the gcc-arm-none-eabi toolchain. However, in the build process it throws the
following unexpected error about an unsatisfied runtime dependency:
Error:
Problem: conflicting requests
- nothing provides libpython2.7.so.1.0()(64bit) needed by
nativesdk-gcc-arm-none-eabi-9-r0.1.x86_64_nativesdk
Since this package works with python3, python2 was deprecated and this tool is
only needed to build Cortex-M4 applications, this commit removes this package
from the default SDK.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds a patch for the qcacld-3.0 wireless driver to read the
wireless MAC addresses from device tree. This patch is based on the original
commit from qcacld-2.0 driver improving and simplifying the code to work with
the new qcacld-3.0 driver.
https://onedigi.atlassian.net/browse/DEL-7916
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the wireless firmware in order to work with the new Linux
qcacld-3.0 wireless driver.
Latest release "r10016.1 - Post-CS3 1.0.016.1" updates the following files from
"qca6574au-le-2-2-1_qca_oem" product branch:
PCIe:
- athwlan.bin (b4fd36922625b7303d006581f6c7cd10)
- utf.bin (0d70048214fea05d1c40b3034e8107cd)
SDIO:
- qwlan30.bin (342cb50ce5c6ff930a65f341c0dfbc77)
- utf30.bin (f94810be89cc2f3e979ab4a57243872b)
https://onedigi.atlassian.net/browse/DEL-7916
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the Linux wireless driver for Qualcomm's chipset to the
new qcacld-3.0 driver.
This update is based on the release "r10016.1 - Post-CS3 1.0.016.1" from
"qca6574au-le-2-2-1_qca_oem" product branch, which uses for a Linux kernel v5.4
the tag "CHSS.LNX_FSL.5.0-01200-QCA6574AUARMSDIOHZ".
https://onedigi.atlassian.net/browse/DEL-7916
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Commit 8c396281 ("layer: add dynamic-layers for NXP platform") introduced a
typo in the dynamic layer name.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit reverts partially the commit 548b8729 ("image_types: add support to
create CCMP15 ubifs images") to fix the boot partition generation.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This platform initializes the Bluetooth interface through the own bluetooth
driver, so the custom Digi init scripts are not needed.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit changes the "Image" for the "zImage" as the default kernel image
type for the STM platform.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit avoids creating a subfolder for the kernel artifacts, to homogenize
it with the NXP platforms and avoid using custom recipes for the result
artifacts.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This recipe will download and install the required firmware binaries for
bluetooth and wireless interfaces. This recipe is based on the release
imx-hardknott-cynder_r1.0 (Wireless firmware v13.10.246.261)
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit removes some STM recipes that are not
needed in our layer because they apply changes that
are not required in our DEY layer.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Javier Viguera
Hector Palacios
Mike Engel
Arturo Buzarra
Gonzalo Ruiz
Francisco Gil
Tatiana Leon
Isaac Hermida