* prefix TRUSTFENCE_ to variable SIGN_MODE for DEY
* prefix CONFIG_ to variable SIGN_MODE for script
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Although the recipe was updated with the modifications in meta-fsl-bsp-release,
the revision was still pointing to the sumo-4.14.98-2.2.0 version of
imx-mkimage, which is incompatible with our recently updated patch.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update SRCREV and SRCBRANCH, change the names of the m4 demos that are
installed into imx-boot, change the name of the SECO firmware (ahab container)
and update our patch so it applies over the newest revision of imx-mkimage.
For the time being, use the B0 SECO firmware for all i.MX8QXP platforms and add
the changes needed for C0 support in comments.
https://jira.digi.com/browse/DEL-6932
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This imx-seco recipe manages now the NXP IMX SECO firmware, it was removed
from the firmware-imx recipe.
https://jira.digi.com/browse/DEL-6823
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
These images were broken in many ways, including ethernet not working and Linux
not booting. For now, revert back to the build command that was used in
DEY-2.6-r1.
https://jira.digi.com/browse/DEL-6677
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The existing loops were iterating through all RAM_CONFIGS, but
they must only iterate over those that match the RAM size on the
platform's UBOOT_CONFIG.
This commit adds a Python class 'boot-artifacts' to get the list of matching
combinations of RAM_CONFIGS and UBOOT_CONFIG so that the iteration
is easier to do than nesting loops inside one another.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
The recipe was creating a variable with the value of another one from
the main recipe, just to refer to the bootable artifact prefix.
We can now use instead the new UBOOT_PREFIX variable.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Similar to the way the u-boot recipe does, create a symlink to the default
bootable artifact.
Since they are overwritten on every loop, this requires that the default
RAM configuration is set the last on the list of RAM_CONFIGS (same
convention than the one used on UBOOT_CONFIGS).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
With the rework to support variants, the machine name (actually the
UBOOT_CONFIG) was removed from the filename. Re-add it using
${MACHINE_NAME} which is more appropriate than the ${UBOOT_CONFIG} which
contains the RAM size (now present in ${ramc}).
While on it, remove one of the two symlinks on DEPLOYDIR. Only one makes
sense.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
There are several U-Boot binaries, depending on RAM size, at the moment:
- u-boot.bin-ccimx8x_sbc_pro512MB
- u-boot.bin-ccimx8x_sbc_pro1GB
- u-boot.bin-ccimx8x_sbc_pro2GB
and several SCFW files, depending on frequency, size, bus width, at the
moment:
- scfw_tcm.bin-1.2GHz_512B_16bit
- scfw_tcm.bin-1.2GHz_1GB_16bit
- scfw_tcm.bin-1.2GHz_1GB_32bit
- scfw_tcm.bin-1.2GHz_2GB_32bit
From these, we need to combine those that match the RAM size, to produce
bootable images for the different variants.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
These dependencies went missing when we deleted our first .bb file and replaced
it with a .bbappend. Without these dependencies, the build can sometimes fail.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Most of the support has been added to the meta-freescale layer, so
substitute our recipe for a .bbappend and redefine the tasks to build
U-Boot images for our two variants (1GB and 2GB).
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Mike Engel
Hector Palacios
Gabriel Valcazar
Arturo Buzarra
Gonzalo Ruiz