Commit d3f3cfdb62 removed the inclusion of STM's
linux-stm32mp.inc from meta-st-stm32mp in our linux-dey recipe, but this
inadvertently removed the logic in do_configure() necessary to use our custom
ccmp1_defconfig. Since this commit, the kernel was being built with the default
ARM defconfig, which is very different from our custom defconfig and doesn't
even boot on MP1 platforms.
Rework the logic used to copy our platform's defconfigs to prevent this.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit removes the BOOTLOADER_SEEK_OFFSER, because it has been
moved into the swupdate class and renamed into SWUPDATE_UBOOT_OFFSET.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
This commit adds u-boot swupdate support for all platforms.
Now u-boot can be updated with all our supported update
options. Currently it will only update first partition
u-boot partition.
https://onedigi.atlassian.net/browse/DEL-8749
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
The 'mtd-blacklist' parameter prevents swupdate from acting upon those
partitions that we consider sensitive.
Make such list platform-dependent.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The LEGACY_IMAGE_FORMAT defaults to 'y' if there is no FIT
support, which happens after applying the default configuration.
Then, the FIT support is added in a config fragment, but the
LEGACY_IMAGE_FORMAT is not disabled.
Disabling this is recommended to avoid the possibility to boot
unsigned legacy images.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
As part of the integration of the new ML package, also update the
ethos-u-firmware binary built from Stash:
Repo: emp/ethos_u_firmware.git
Revision: a0352b0cf7267c896b55980dedd08daddc780733
Source: NXP's MCUXpresso SDK_2.14.0_MIMX9352xxxxK
And, drop deepview-rt support for ccimx93, as NXP has done the same in
6.1.36-2.1.0 release.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The U-Boot bootscript loads the fitImage into RAM memory to run
this bootscript. This bootscript ends up calling 'dboot' command
to run the FIT default configuration.
To avoid 'dboot' re-loading again the fitImage into RAM memory,
set this temporary variable that will be immediately reset
by 'dboot'.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
An anonymous function in linux-stm32mp.inc produces a bbfatal error when
KERNEL_DEVICETREE variable contains more than one device tree. This is our
case since we build the main DT plus a number of DT overlays.
This commit removes the dependency to this include file since we have our
own recipe to build the kernel and it is not needed at all.
It also removes the build of a uImage and the need to provide a
LOADADDR.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Backport of graphics package for ccimx93 from NXP's Mickledore-based
6.1.36-2.1.0 release. Mainly copies and appends of graphics recipes
from the new release, and restricted to ccimx93 by changing the
COMPATIBLE_MACHINE, so it does not affect other platforms.
Notice, that the new version of weston used now by the ccimx93 requires
a different profile file (weston-socket.sh). This profile supercedes the
old 'weston.sh'.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Backport of multimedia package for ccimx93 from NXP's Mickledore-based
6.1.36-2.1.0 release. Mainly copies and appends of multimedia recipes
from the new release, and restricted to ccimx93 by changing the
COMPATIBLE_MACHINE, so it does not affect other platforms.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
In commit 2fd1dbfed7, we accidentally removed some changes needed to
build imx-boot with Trustfence enabled, which were added in commit
1ce17da864.
This partially reverts commit 2fd1dbfed7
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
LVGL is a free and open-source embedded graphics library that is able to run
in environments with limited resources.
This image includes a desktop environment and an LVGL widget demo (lvgl_demo)
https://onedigi.atlassian.net/browse/DEL-8740
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit adds several overlays for DVK v2 and modifies the boot script to apply it
based on the board_version variable.
https://onedigi.atlassian.net/browse/DEL-8746
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The nodes "/dev/ramX" and "/dev/loopX" are mounted on boot.
Each node calls the mount.sh script, but they are not mounted
because these nodes are blacklisted in the "blacklist.conf" file.
In the ccmp13 adding this modification in the rule saves
around 4 seconds per boot.
In the ccmp15 and ccimx6ul around 2 seconds are saved.
https://onedigi.atlassian.net/browse/DEL-8725
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
This commit adds signed FIT image support for the CCMP1
platforms when using Trustfence.
https://onedigi.atlassian.net/browse/DEL-8591
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Use the intention of installing dual boot firmware as a condition to set
bootlimit=3 so that the bootcount mechanism is enabled.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DUB-1058
During firmware install, the target may be reset several times.
We don't want the bootcount to count these as boot attempts.
This was done in a791bb4463 for the ccmp1
but not for the rest of platforms.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
These binaries are installed in subdirectories by default. The uuu
installer expects to find all binaries on the same folder where the script
is. By creating symlinks, the uuu installer can find all the binaries it
needs directly on the deploy folder.
NOTE: variables in 'for' clauses are intentionally without quotes to skip
whitespaces in them.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Improve boot attempts message showing not only the current boot attempt
but also the limit:
(boot attempt 1/3)
Print the message only when the bootcount mechanism is active, i.e. when
the bootlimit is defined (not zero), and when bootcount is > 0.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DUB-1056
New NXP's release is based on upstream v2.8. Use this only for ccimx93,
and keep using the previous Kirkstone release (based on upstream v2.6)
for the rest of the platforms.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Recently, meta-freescale backported the support to build multiple boot
artifacts. This clashes with the changes in our imx-boot bbappend,
so update the bbappend to make it compatible with the latest changes
in meta-freescale.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 2fd1dbfed7)
Through the inclusion of 'nand-4-256' in BOOTDEVICE_LABELS, the include
file 'st-machine-common-stm32mp.inc' adds strings to MULTIUBI_BUILD and
IMAGE_FSTYPES that result in building ubi and ubifs images.
These are redundant and not needed since meta-digi's
'image_types_digi.bbclass' already generates the needed ubifs images.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8714
The STM signtools are precompiled binaries with a fixed RPATH to look for
dynamic libraries.
When the binaries are installed to the regular ${bindir} (either native or
nativesdk), additional toolchain libraries in the regular ${libdir} folder
confuse the binaries, resulting in segmentation faults when running them
or missing symbols.
The package has been reworked to place the directory structure expected
by the binaries, in a subfolder "stm" within the ${bindir}.
Two wrapper scripts with the names of the binaries (STM32MP_KeyGen_CLI and
STM32MP_SigningTool_CLI) have been created to run the binaries in the new
subfolder.
Package version has been bumped to 1.1.
While on it, remove the 'do_install' from trustfence-stm-signtools.inc
which is not needed because the 'bin_package' class already provides the
same functionality.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8720
The appropriate way to add STM signtools to the SDK is via RDEPENDS on
nativesdk-packagegroup-sdk-host, not through the parent recipe of STM
signtools recipe itself.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8720
Some platforms do not support signing external artifacts (kernel, dtb,
etc.) yet, so we need to decouple the signing of the bootloader from the
signing of the external artifacts.
This commit generalizes the code, so instead of having platform exceptions
scattered along the recipes, we create a new variable used conditionally
to sign or not the external artifacts.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
ARM64 generic overrides where in the middle of the chain with more
precedence than IMX overrides.
From:
MACHINEOVERRIDES="imx-generic-bsp:imx-nxp-bsp:imxdrm:imxpxp:mx9-generic-bsp:mx9-nxp-bsp:mx93-generic-bsp:mx93-nxp-bsp:ccimx93:ccimx93:aarch64:armv8-2a:use-nxp-bsp:ccimx93-dvk"
To:
MACHINEOVERRIDES="aarch64:armv8-2a:use-nxp-bsp:imx-generic-bsp:imx-nxp-bsp:imxdrm:imxpxp:mx9-generic-bsp:mx9-nxp-bsp:mx93-generic-bsp:mx93-nxp-bsp:ccimx93:ccimx93:ccimx93-dvk"
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
mkimage output provides some information (basically image offsets) that
cst (code signing tool) uses to sign imx-boot images.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This version supports i.MX8ULP and i.MX9x devices.
NOTICE: changed the "srk_ca" parameter in ahab_pki_tree.sh from "yes" to
"no". This script is shared between cc8x and ccimx93. The imx93 does not
support that option at the moment (generation of subordinate SGK certs)
and for the cc8x we were generating them but never used them to sign
the artifacts.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Merge the patches for the PKI tree generation scripts, to ease
maintenance (still keeping two separate patches for HAB4/AHAB).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
ARM64 generic overrides were in the middle of the chain with more
precedence than IMX overrides.
From:
MACHINEOVERRIDES="imx-generic-bsp:imx-nxp-bsp:imxdrm:imxpxp:mx9-generic-bsp:mx9-nxp-bsp:mx93-generic-bsp:mx93-nxp-bsp:ccimx93:ccimx93:aarch64:armv8-2a:use-nxp-bsp:ccimx93-dvk"
To:
MACHINEOVERRIDES="aarch64:armv8-2a:use-nxp-bsp:imx-generic-bsp:imx-nxp-bsp:imxdrm:imxpxp:mx9-generic-bsp:mx9-nxp-bsp:mx93-generic-bsp:mx93-nxp-bsp:ccimx93:ccimx93:ccimx93-dvk"
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
If the default r/w rootfs is not found it will try to do a
fallback to the squashfs image.
In the nand devices additionally we need to set the rootfstype
to squashfs.
https://onedigi.atlassian.net/browse/DEL-8638
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Gabriel Valcazar
Mike Engel
Hector Palacios
Javier Viguera
Francisco Gil
Arturo Buzarra
Isaac Hermida