Also remove QT4 phonon patches and qtmediaplayer demo as they depend on
gstreamer-0.10.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This synchronizes the machine configuration files with the latest
changes in meta-fsl-arm for yocto 2.0
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
ccimx51js and ccimx53js are not supported in this version of DEY.
Support for those platforms is in previous versions of DEY.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
That commit disables CONFIG_FIRMWARE_IN_KERNEL which is needed by IMX
SDMA driver and maybe other drivers.
An example of functionality failing without that enabled is the audio
over HDMI.
While on it configure the atheros driver as module. Otherwise the kernel
tries to load the firmware from user-space before the rootfs being
mounted, giving error messages on boot:
ath6kl: No "atheros,board-id" property on wireless node.
ath6kl: Failed to get board file ath6k/AR6003/hw2.1.1/bdata.bin (-2), trying to find default board file.
ath6kl: Failed to get default board file ath6k/AR6003/hw2.1.1/bdata.SD31.bin: -2
ath6kl: Failed to init ath6kl core
ath6kl_sdio: probe of mmc3:0001:1 failed with error -2
https://jira.digi.com/browse/DEL-1858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is an atheros proprietary package that contains the athtestcmd and
wmiconfig applications.
Neither of them are currently used.
https://jira.digi.com/browse/DEL-1878
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Disable firmware loading from user-space (udev) as the kernel is able to
load the firmware directly.
https://jira.digi.com/browse/DEL-1858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Split the ATH6KL firmware files to a different recipe and package so
they can be used regardless of what driver we are using (the external
module or the upstream driver).
Reuse the 'firmware-atheros' recipe which was creating a package with
bluetooth firmware, to create the package with wireless firmware as
well.
Also remove 'ccimx6' as compatible machine for the external atheros
module, as the module does not even compile with the kernel version we
are using (3.14).
https://jira.digi.com/browse/DEL-1858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Which wireless module to use belongs more to the machine config files in
the BSP layer, than to the generic wireless packagegroup.
https://jira.digi.com/browse/DEL-1858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This synchronizes the machine configuration files with the latest
changes in meta-fsl-arm for yocto 1.8
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There is only one u-boot supported for each platform, so there is no
need to explicitly set the u-boot preferred version.
As a result it was needed to rework the nvram recipe which was using the
removed PREFERRED_VERSION_u-boot-dey variable.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* Move kernel configuration fragments to 2.6.35 recipe (that's the only
kernel version using them)
* Move compile-time dependences to common include linux-dey.inc
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There is only one kernel supported for each platform, so there is no
need to explicitly set the kernel preferred version.
Also:
* Remove IS_KERNEL_2X variable which is no longer needed.
* Simplify jenkins build script, now that we do not need to build two
kernel versions for ccardimx28.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of creating a new recipe for u-boot fw-utils (fw_printenv) just
bbappend the recipe in Poky.
https://jira.digi.com/browse/DEL-1829
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* Merge u-boot-dey-rev_2015.04.inc into the recipe. There is no need to
split the recipe, as there is no other recipe using this u-boot code.
* Update uboot configurations to the new format '_defconfig'. Also add
the new 2GB variant.
* Remove PREFERRED_VERSION_u-boot-dey for CC6, as there is only one
version available for this platform.
https://jira.digi.com/browse/DEL-1829
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
https://jira.digi.com/browse/DEL-1734
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 35a78b13f72963205dc1ae1e05ee851ca6cc4f28)
This is a Consumer quad-core 1.2GHz, 4GB eMMC, 2GB DDR3, -20/+85C variant
with bluetooth and wireless, no kinetis.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Linux 3.10 is still available via project's local.conf.
PREFERRED_VERSION_linux-dey = "3.10"
KERNEL_DEVICETREE = "..."
https://jira.digi.com/browse/DEL-1748
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Platform defconfig corresponds to sha1 'e1506ff' in the kernel.
At this point linux-3.10 continues to be the default, some device-tree
files were renamed and the external atheros module does not compile with
linux-3.14, so to use this kernel with dey-1.8, following lines are
needed in the project's local.conf:
PREFERRED_VERSION_linux-dey = "3.14"
KERNEL_DEVICETREE = " \
imx6dl-ccimx6sbc-wb.dtb \
imx6dl-ccimx6sbc-w.dtb \
imx6q-ccimx6sbc.dtb \
imx6q-ccimx6sbc-wb.dtb \
imx6q-ccimx6sbc-wb-ldo-bypass.dtb \
imx6q-ccimx6sbc-w.dtb \
"
MACHINE_FEATURES_remove = "wifi"
https://jira.digi.com/browse/DEL-1748
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Now each platform is only supported in one kernel version, so there is
no need to have multiple alsa config files per linux kernel version.
https://jira.digi.com/browse/DEL-1747
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The 'resize2fs' command we use to resize the filesystem on first boot
has been moved from standard 'e2fsprogs' package to its own
'e2fsprogs-resize2fs', so this is the one we need to include now.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also remove kernel configuration fragments for kernel 3.10. This is not
needed for 3.10 as all the configuration is done via device-trees.
https://jira.digi.com/browse/DEL-1695
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit b0031915f1c7f3eeba680161827e78bbac9eebb4)
This is a regression introduced in a74363c. The MOD_VARIANT variable was
not correctly set because in kernel 2.6.35 there is no device-tree
support.
The fix is to get the module variant from the sysfs as a fallback for
old kernels.
https://jira.digi.com/browse/DEL-1694
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 6357d71152c38c4713fc534b78b6c2993b201aa8)
The following section configures the Audio Data Path to Voice Over UART.
//Audio - Audio main config
[H:S]0041
[H:S]0004
[H:A]01 00 00 00
The syntax is explained in the AR3002 2.2 Tag definition 1.0 document from
Qualcomm/Atheros.
Other audio sections are removed as they are not being used.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Adapt u-boot bootscript after latest changes in 'mmcdev' variable
semantics. Now the boot media device is stored in 'mmcbootdev' variable.
Also set the device tree filename depending on the hardware variant.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Support new memory chips for 'ccardimx28js'.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit b7d108c35f6a26a78a4fbab399fd2c0878976a67)
Some CC6 variants have wireless but not bluetooth. Those variants need a
different calibration file.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit a74363cf4a9b239edf9d628f84fe7e88002c0f5c)
Add post-installation script that runs on first boot to reconfigure the
u-boot environment depending on the media (EMMC,SD) the target is
booting from.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 8486d120355d80ea8ad5864596c8486a1d3c0db2)
This is needed in the context of CC6 variants 0x7 and 0x9 (EMMC-less).
Changes:
* Do not use 'meta-fsl-arm' image generation class: removed include and
override SDCARD generation function
* Use same VFAT boot image for EMMC and SD card. The u-boot bootscript
has been adapted to be able to boot Linux from both SD and EMMC.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 8b8456b8fd90facd92dfc87632effa582ca60475)
This will allow in following commit to use the same VFAT boot image for
EMMC and SD. Until now we were creating different boot images for EMMC
and SD card images.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 13e9ec7608d42430c2a01a728d030752a71f7948)
Javier Viguera
Alex Gonzalez
Hector Palacios
Jose Diaz de Grenu de Pedro