The cryptoauthlib package is being added in digi-defaults.inc, which is parsed
before this file. Setting the variable here overwrites its previous value,
causing the cryptoauthlib package to be left out of the rootfs. Append to the
variable instead of overwriting it to avoid this.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Aside from adding the wireless-regdb-static support, this NXP package needs to
be included in the rootfs so the regulatory fw gets loaded in userspace.
https://jira.digi.com/browse/DEL-7133
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Disable all encryption support by default on CC8X and CC8MN platforms so
the default built images can be directly built.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This update is a cosmetic one and removes the RAM frequency from the SCFW
filenames. Reflect this change in the RAM_CONFIGS variable and in the uSD/UUU
installation scripts.
As a result, the imx-boot filenames will no longer have the RAM frequency
either.
https://jira.digi.com/browse/DEL-7096
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Modify the imx-seco recipe so it deploys the B0 and C0 versions of the SECO
firmware, Then, modify the imx-boot recipe so it builds every possible
combination of:
* RAM configuration
* imx-boot target (with and without M4 demos)
* Silicon revision
https://jira.digi.com/browse/DEL-7069
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Each platform now has only one base device tree, meant for the i.MX8DX variants
of the ccimx8x boards. Apply the QXP overlay in the bootscript if the SOC is
identified as an i.MX8QXP.
Since we want to give this overlay a higher priority than the SOM overlays
(wifi and bluetooth), prepend it to the overlay list after appending the SOM
overlays.
https://jira.digi.com/browse/DEL-7100
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These overlays aren't handled in our bootscript, but we make them available for
users in case they wish to use alternative interface configurations.
https://jira.digi.com/browse/DEL-7100
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Remove the old wb device trees from the ccimx8x-sbc-express and ccimx8x-sbc-pro
configuration files and add the ccimx8x wifi and bt overlays. Modify both
platforms' bootscripts to apply the overlays depending on board_id, hardware
capabilities or module variants.
https://jira.digi.com/browse/DEL-7100
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This allows to generalize the code instead of needing to replicate
overrides for each platform that contains the MCA.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The variable BT_DEVICE_NAME is used to name the Bluetooth device name on
the BlueZ configuration file. Re-use the contents of DIGI_FAMILY (except
for ccimx6qp which re-writes it) to simplify platform definitions.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
- WLAN_P2P_INTERFACE is the same for all platforms: "p2p0".
- WLAN_P2P_DEVICE_NAME can be built out of ${DIGI_FAMILY} except for
the ccimx6qp, that's why it has a weak default assignment.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This overlay is not handled in our bootscript, but we add it to the Linux
partition in case users want to apply it manually.
https://jira.digi.com/browse/DEL-2609
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Parse the hardware version from the HWID and load the overlay if and only if
the revision is "1". Also, update the board's device tree list accordingly.
https://jira.digi.com/browse/DEL-7070
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Instead of having two separate device trees for the non-wireless and wireless
variants of the ccimx8mn, use the non-wireless .dtb as a base and apply the
overlays in the bootscript depending on the variant's capabilities.
Also, update the board's device tree list accordingly.
https://jira.digi.com/browse/DEL-2609
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Default version is defined in poky layer, this commit also modifies
the preferred version to match with the new one.
https://jira.digi.com/browse/DEL-7013
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Remove support to kernel v4.14 and move platforms to use the new
kernel v5.4
https://jira.digi.com/browse/DEL-7013
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add Trustfence support for signing imx-boot images:
- Install a different U-Boot signing script for images with U-Boot SPL.
- Store mkimage log for later use in the signing script
- make 'print_hab_log' and store its log for later use in the signing script
https://jira.digi.com/browse/DEL-7023
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This commit adds a installation script that uses fastboot support to
update the target firmware.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-6845
Additionally:
- The handling of gpios has been swapped so 'Set low XBEE_SLEEP_RQ' is done
before 'Power cycle XBEE_RESET_N' to assure the device doesn't enter sleep mode.
- Removed ExecStop entry from systemd service since it's doing nothing.
https://jira.digi.com/browse/DEL-6424https://jira.digi.com/browse/DEL-6423
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
Environment encryption is not yet supported in U-Boot.
Unset TRUSTFENCE_ENCRYPT_ENVIRONMENT on the machine configuration
and remove the platform conditional on the class.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
* prefix TRUSTFENCE_ to variable SIGN_MODE for DEY
* prefix CONFIG_ to variable SIGN_MODE for script
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The ccimx8mn console is on ttymxc0 (uart1 thanks to aliases).
https://jira.digi.com/browse/DEL-6876
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
Now that xbee-init supports multiple interfaces, add the XBee Cellular
GPIOs to the already existing XBee User ones to it so it can handle both
of them on the ccimx8mn DVK.
https://jira.digi.com/browse/DEL-6887
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update the values of the MACHINE_SOCARCH_FILTER variable with the ones in
meta-fsl-bsp-release's imx-base.inc.
https://jira.digi.com/browse/DEL-6932
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
For the i.MX8M processors, the do_deploy support is provided by
the upstream recipe firmware-imx-8m.
https://jira.digi.com/browse/DEL-6911
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
WPA and P2P configuration files are basically the same between all
platforms, so we remove all duplicated files to use a common file
and modify it in the recipe logic.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The meta-freescale-3rdparty layer used for the mainline bsp support does
not support the WiFi interface on thud. WiFi is currently merged on master
so it will probably be available on Zeus (2.8).
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Mike Engel
Francisco Gil Martinez
Gonzalo Ruiz
Arturo Buzarra
Hector Palacios
Gabriel Valcazar
Hector Bujanda
Javier Viguera
Alex Gonzalez