ARM64 generic overrides were in the middle of the chain with more
precedence than IMX overrides.
From:
MACHINEOVERRIDES="imx-generic-bsp:imx-nxp-bsp:imxdrm:imxpxp:mx9-generic-bsp:mx9-nxp-bsp:mx93-generic-bsp:mx93-nxp-bsp:ccimx93:ccimx93:aarch64:armv8-2a:use-nxp-bsp:ccimx93-dvk"
To:
MACHINEOVERRIDES="aarch64:armv8-2a:use-nxp-bsp:imx-generic-bsp:imx-nxp-bsp:imxdrm:imxpxp:mx9-generic-bsp:mx9-nxp-bsp:mx93-generic-bsp:mx93-nxp-bsp:ccimx93:ccimx93:ccimx93-dvk"
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Bitbake was always copying the public key 1 to the rootfs, no matter what the value specified in
the 'TRUSTFENCE_KEY_INDEX' variable was. This commit fixes the issue by enclosing the variable
between curly braces so that bitbake is able to expand it and calculate the correct key index.
Signed-off-by: David Escalona <david.escalona@digi.com>
Commit 429125cce0 created a minimal version 'defconfig'
that doesn't include all the default configuration options
of swupdate.
However, an anonymous python function inside the swupdate
repository establishes dependencies basing on configuration
switches it finds (or not) in the 'defconfig' file and any
additional configuration fragments.
For this reason, a minimal 'defconfig' cannot be used in
this recipe and a full configuration file (that also includes
default options) must be used instead.
Reported-by: Stephan Klatt
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There was a missmatch between the configuration file and the
correct adc in the ccmp15 platform.
Also a whitespace is removed from ccmp13 configuration file.
https://onedigi.atlassian.net/browse/DEL-8702
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
If the default r/w rootfs is not found it will try to do a
fallback to the squashfs image.
In the nand devices additionally we need to set the rootfstype
to squashfs.
https://onedigi.atlassian.net/browse/DEL-8638
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
When booting from a microSD, the variable 'boot_device' is
set to "mmc". Check this to fall back to booting Linux from
the microSD partitions.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
These are files for programming images with STM32CubeMX tool.
We don't use the tool or the files. Remove the task to avoid build
warnings.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
BOOTDEVICE_LABELS defines the supported boot device (NAND by default).
BOOTSCHEME_LABELS defines the which kind of boot is supported.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
We will use BOOTDEVICE_LABELS as a means to add 'sdcard'
configuration to TF_A_CONFIG within meta-st-stm32 so there
is no need to have a wrapper variable in meta-digi.
This reverts commit 7cf314ba80.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
We will use BOOTDEVICE_LABELS as a means to add 'sdcard'
configuration to TF_A_CONFIG within meta-st-stm32 so there
is no need to have a wrapper variable in meta-digi.
This reverts commit c6f19a099c.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Digi's mechanism to use a custom Linux kernel defconfig is
based on setting the variable KERNEL_DEFCONFIG, however ST
implements their own mechanism with a custom variable
KERNEL_EXTERNAL_DEFCONFIG. When providing an external defconfig,
the variable needs to be set, otherwise a build error
will be generated. So to keep compatibility with NXP
platforms, this commit weakly assigns KERNEL_EXTERNAL_DEFCONFIG
to a default value "defconfig".
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
ConnectCore Cloud Services examples are included in 'dey-examples' repository
so they can be built from here and also imported in Eclipse/Digi Application
Development Environment for Linux with the samples wizard.
The example 'upload_file' has been removed since currently there is no support
for binary data points in the CCCS daemon/client model.
https://onedigi.atlassian.net/browse/DEL-8628
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
This recipe generates several packages:
* 'cccs' includes the CCCS shared library
* 'cccs-daemon' includes the binary and resources to execute the CCCS daemon
(daemon, service and init scripts, configuration file)
* 'cccs-cert' includes the required certificate to use CCCS daemon
* 'cccs-gs-demo' includes the binary and resources to execute the CCCS get
started demo (binary, service and init scripts)
* 'cccs-legacy' includes the binary (all-in-one) application to execute
the legacy CCCS application (aka cloud-connector) and the configuration
file
* 'cccs-legacy-dev' includes resources to develop legacy CCCS applications
(all-in-one) (header files inside 'cloud-connector' and 'cloudconnector.pc'
pkg config file)
* 'cccs-legacy-staticdev' includes static resources to develop legacy CCCS
applications (all-in-one) (static library)
This commit also renames:
* 'CLOUDCONNECTOR_PKGS' variable to 'CCCS_PKGS'.
* 'CC_DEVICE_TYPE' variable to 'CCCS_DEVICE_TYPE'.
https://onedigi.atlassian.net/browse/DEL-8628
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
Until now, for dualboot systems, all boot variables were calculated on each boot depending on the value of the
'active_system'. These variables are used to boot the device but were not saved, which could lead to a missmatch
between their value in the environment and their required values to correctly boot the system. This commit
simplifies a bit the variables calculation and adds a block to synchronize their value in the environment.
Signed-off-by: David Escalona <david.escalona@digi.com>
All the 'altboot' script functionality has been moved directly to the 'altbootcmd' command
in U-Boot, so this script is no longer necessary. Remove it for all platforms.
https://onedigi.atlassian.net/browse/DEL-8674
Signed-off-by: David Escalona <david.escalona@digi.com>
Those bbappends are enabling 'examples' PACKAGECONFIG. This is now done
in the distro config file.
https://onedigi.atlassian.net/browse/DEL-8675
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
QT v6.5 is a long term support (LTS) and is the version used in newer
releases from NXP (based on Yocto 4.2 mickledore)
This commit basically backports the QT v6.5 from meta-freescale community
layer (mickledore) with some recipe's polishing from meta-imx.
https://onedigi.atlassian.net/browse/DEL-8675
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The install scripts from SD/USB use a fixed image name.
If you are trying to install a different image you need to set
the env variable 'image-name' first.
Add a helper message if default files are not found to
avoid needing to go to the documentation.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
During firmware install, the target may be reset several times.
We don't want the bootcount to count these as boot attempts.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Now we can't determine if the rootfs is ubifs/squashfs
in the ccmp1X platforms, so we need to add again the rootfstype
parameter but only for ccmp1X platforms.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Now in the ccmp1X platform the index for the data partition is
hosted in the ubi1 volume instead of the ubi0.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
The ccmp1 has two MTD partitions (UBI, UBI_2) with different system
volumes.
Previously, the fact of having two ubi devices was taken as proof of
being on a multi-MTD system (one that has one UBI volume per partition).
Instead, this commit reformulates the condition to having a partition of
the same name than the UBI volume.
For the case of the ccmp1, add a new for loop to iterate across any number
of UBI devices.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The ccmp1 has two MTD partitions (UBI, UBI_2) with different system
volumes.
Previously, the fact of having two ubi devices was taken as proof of
being on a multi-MTD system (one that has one UBI volume per partition).
Instead, this commit reformulates the condition to having a partition of
the same name than the UBI volume.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The P2P interface may have a different name, for instance, in the ccimx93 it
is wfd (wifi direct).
Generalize Digi P2P scripts to use the name from the platform config file.
https://onedigi.atlassian.net/browse/DEL-8468
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Make sure all packagegroups and examples needed for Qt6 support are accesible
to both NXP and STM-based platforms.
https://onedigi.atlassian.net/browse/DEL-8655
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
PKI tree generation for the STM32MP15 cpu provides the undesired file
"publicKeysHashHashes.bin", which is only required by STM32MP13. This commit
generates the PKI tree according to the KeyGen tool documentation to avoid
generate this extra file and avoid confusing the end user.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Any errors in the PKI tree generation are not reported to bitbake, so the
script fails silently. This commit adds a validation of the script execution,
and if it fails, it aborts the execution and notifies to bitbake.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The KeyGen tool to generate 8 key pairs requires 8 consecutive passwords,
however, when the shell expands the passwords variable, it interprets it as a
single string instead of 8 different strings and fails.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The CCIMX6 platform is the only one that will keep using the 'bootcount' value stored in the environment.
For this reason, that is the only platform requiring the 'upgrade_available' flag to be set after a
firmware update. For the rest of the platforms, remove it.
https://onedigi.atlassian.net/browse/DEL-8506
Signed-off-by: David Escalona <david.escalona@digi.com>
While on it, remove the block of the 'dualboot' script that was taking care of this action.
https://onedigi.atlassian.net/browse/DEL-8506
Signed-off-by: David Escalona <david.escalona@digi.com>
Add a user space application to manage the bootcount from the running system. This application
allows to read, reset and set the bootcount:
Usage: bootcount [options]
-r --read Read the current bootcount value (Default action)
-s <value> --set=<value> Set current bootcount to a specific value.
-x --reset Reset bootcount value to zero.
The binary checks the running platform underneath to perform the correct system access.
While on it, add a service to automatically execute the binary on boot to reset the bootcount value.
https://onedigi.atlassian.net/browse/DEL-8506
Signed-off-by: David Escalona <david.escalona@digi.com>
The 'bootcount' value is now incremented and stored in the system on every boot and
not only then the 'upgrade_available' flag is set. Also, ensure the value is cleared
when the 'altboot' script is executed by running the new U-Boot command 'bootcount reset'.
https://onedigi.atlassian.net/browse/DEL-8506
Signed-off-by: David Escalona <david.escalona@digi.com>
This commit adds sha256 entry for the script files into
the sw-descrition. It is necessary for the Trustfence
authentication to have the included script files signed.
https://onedigi.atlassian.net/browse/DEL-8649
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
In the context of the class, we must use ${IMAGE_ROOTFS} instead of ${D}.
Change the calling of the function to POSTPROCESS (after the rootfs has
been created) instead of POSTINSTALL (after the packages have been
installed).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
There is a corner case in the cc6ul where the update from
recovery was failing.
If the u-boot variable rootfstype is set to squashfs u-boot
modify the bootargs adding "root=/dev/ubiblock1_0". The grep
of the command line was failing and detecting the device as
mmc and making the firmware update process fail.
Modify the grep to use the same system that we are using in
the update-firmware script.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
This variable is only needed in the cc6ul, that's the reason
to create another sw-description only for the ccimx6ul.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Javier Viguera
David Escalona
Hector Palacios
Francisco Gil
Arturo Buzarra
Mike Engel
Tatiana Leon
Isaac Hermida
Gabriel Valcazar