This commit generalizes the BT GPIO value used in the bluetooth-init
script for different platforms.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://onedigi.atlassian.net/browse/DEL-9668
The i.MX91 does not include an NPU; only the i.MX93 does.
Remove the Ethos-U firmware support that was accidentally added during
code reorganization.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Some of the hardware settings that were common between the cc93/cc91 SOMs
and DVK are not common for the cc95.
This commit moves those defines from common ccimx9.inc to each specific
machine configuration file.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Move the LPDDR4 firmware list from the shared ccimx9 include into the
machine configurations for the ccimx91/93 DVK, allowing the upcoming
ccimx95 to utilize its own distinct values.
Also, remove the redundant IMXBOOT_TARGETS and BOOTLOADER_SEEK_USERDATA
overrides in ccimx91-dvk, as they are duplicated.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
On NXP platforms, the signed/encrypted bootloader images are not
included on the installer ZIP. This prevents from using the installer
when TrustFence is enabled.
This commit adds to the installer:
- If encryption is enabled
- encrypted bootloader
- signed bootloader (for USB recovery boot)
- If encryption is disabled
- signed bootloader
- If TrustFence is disabled
- non-signed bootloader
It also treats the ccimx6ul special, as this has a dedicated file for
USB recovery boot.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9698
The USB and SD installers are U-Boot scripts that are practically
identical.
Merge them into a single template with a couple of machine variables that
determine the default device index in U-Boot for the USB or the microSD
card.
Do dynamic substitutions to create the two installers out of the template.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Configure the FIT_CONF_DEFAULT_DTB in the machine settings to define the
default configuration for the generated FIT image.
https://onedigi.atlassian.net/browse/DEL-9595
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Device tree overlays now have the extension 'dtso' that
distinguishes them from board 'dts' files, so there is
no need for a prefix '_ov_' to tell if a file contains
a DT overlay.
To make them shorter and easier to tell the platform they
are for, change the filename format to:
<platform-name>_<functionality>.dtso
where <platform-name> can be the name of the SOM or the
name of the DVK, so there is no need either to specify
'som' or 'board' on the filename.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
A recent meta-freescale update broke the firmware-ele-imx recipe by setting
a default SECO_FIRWARE_NAME value containing a SoC revision macro we don't
have access to (IMX_SOC_REV_LOWER). Like we do for the ccimx93, use our SoM's
override to overwrite the meta-freescale value with our own.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This removes the psplash package from "core-image" images, which
prevents this failure onn boot:
[FAILED] Failed to start Start psplash boot splash screen.
psplash[454]: Error opening /dev/fb0
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commits adds the CCMX91 platform to the DEY
build system. Furthermore, it creates generic ccimx9
support to be used for the CCiMX91 and CCiMX93
platform.
https://onedigi.atlassian.net/browse/DEL-9106
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Francisco Gil
Isaac Hermida
Mike Engel
Hector Palacios
Javier Viguera
Gabriel Valcazar