Backport of multimedia package for ccimx93 from NXP's Mickledore-based
lf-6.1.55-2.2.0 release. Mainly copies and appends of multimedia
recipes from the new release, and restricted to ccimx93 by changing the
COMPATIBLE_MACHINE, so it does not affect other platforms.
https://onedigi.atlassian.net/browse/DEL-8840
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This new variable establishes the number of 1Kb blocks to skip before writing U-Boot in the
bootloader partition.
Signed-off-by: David Escalona <david.escalona@digi.com>
With the update of the ethos-u firmware for the NPU in previous commit,
this overlay is no longer required.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
As part of the integration of the new ML package, also update the
ethos-u-firmware binary built from Stash:
Repo: emp/ethos_u_firmware.git
Revision: bd5506ddba364ad04602d5009b77077f78450b97
Source: NXP's MCUXpresso SDK_2.14.2_MIMX9352xxxxM
Co-authored-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Backport of graphics package for ccimx93 from NXP's Mickledore-based
lf-6.1.55-2.2.0 release. Mainly copies and appends of graphics recipes
from the new release, and restricted to ccimx93 by changing the
COMPATIBLE_MACHINE, so it does not affect other platforms.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The TF-A and OP-TEE images have different suffixes depending
on whether TrustFence is enabled or not, but the suffix variables
themselves must exist independently of whether TF is enabled.
Currently, they were defined on the trustfence.bbclass, and the
variables did not exist when TF was disabled, which caused build
problems, for example, building the SWU file.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This compression method has a better compression ratio than the default (lzo),
but the (de)compression speed is slower, leading to slower read/write speeds.
However, the recovery partition only gets accessed in specific use cases such
as software updates and partition encryption, and it contains an initramfs. The
UBIFS will only be read at boot time to load its elements, but once the
initramfs is loaded in RAM, there are no more read/write operations to the
UBIFS during runtime, so the speed penalty is minimal.
Take advantage of the improved compression ratio to reduce the size of the
recovery image. On the ccimx6ul, the size is reduced by 248 KiB.
https://onedigi.atlassian.net/browse/DEL-8819https://onedigi.atlassian.net/browse/DEL-8825
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This includes also an update and rename of the Edgelock Enclave firmware
package (firmware-ele-imx).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Commit d3f3cfdb62 removed the inclusion of STM's
linux-stm32mp.inc from meta-st-stm32mp in our linux-dey recipe, but this
inadvertently removed the logic in do_configure() necessary to use our custom
ccmp1_defconfig. Since this commit, the kernel was being built with the default
ARM defconfig, which is very different from our custom defconfig and doesn't
even boot on MP1 platforms.
Rework the logic used to copy our platform's defconfigs to prevent this.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit removes the BOOTLOADER_SEEK_OFFSER, because it has been
moved into the swupdate class and renamed into SWUPDATE_UBOOT_OFFSET.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
This commit adds u-boot swupdate support for all platforms.
Now u-boot can be updated with all our supported update
options. Currently it will only update first partition
u-boot partition.
https://onedigi.atlassian.net/browse/DEL-8749
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
The 'mtd-blacklist' parameter prevents swupdate from acting upon those
partitions that we consider sensitive.
Make such list platform-dependent.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
As part of the integration of the new ML package, also update the
ethos-u-firmware binary built from Stash:
Repo: emp/ethos_u_firmware.git
Revision: a0352b0cf7267c896b55980dedd08daddc780733
Source: NXP's MCUXpresso SDK_2.14.0_MIMX9352xxxxK
And, drop deepview-rt support for ccimx93, as NXP has done the same in
6.1.36-2.1.0 release.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
An anonymous function in linux-stm32mp.inc produces a bbfatal error when
KERNEL_DEVICETREE variable contains more than one device tree. This is our
case since we build the main DT plus a number of DT overlays.
This commit removes the dependency to this include file since we have our
own recipe to build the kernel and it is not needed at all.
It also removes the build of a uImage and the need to provide a
LOADADDR.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Backport of graphics package for ccimx93 from NXP's Mickledore-based
6.1.36-2.1.0 release. Mainly copies and appends of graphics recipes
from the new release, and restricted to ccimx93 by changing the
COMPATIBLE_MACHINE, so it does not affect other platforms.
Notice, that the new version of weston used now by the ccimx93 requires
a different profile file (weston-socket.sh). This profile supercedes the
old 'weston.sh'.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Backport of multimedia package for ccimx93 from NXP's Mickledore-based
6.1.36-2.1.0 release. Mainly copies and appends of multimedia recipes
from the new release, and restricted to ccimx93 by changing the
COMPATIBLE_MACHINE, so it does not affect other platforms.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
LVGL is a free and open-source embedded graphics library that is able to run
in environments with limited resources.
This image includes a desktop environment and an LVGL widget demo (lvgl_demo)
https://onedigi.atlassian.net/browse/DEL-8740
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit adds several overlays for DVK v2 and modifies the boot script to apply it
based on the board_version variable.
https://onedigi.atlassian.net/browse/DEL-8746
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds signed FIT image support for the CCMP1
platforms when using Trustfence.
https://onedigi.atlassian.net/browse/DEL-8591
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Through the inclusion of 'nand-4-256' in BOOTDEVICE_LABELS, the include
file 'st-machine-common-stm32mp.inc' adds strings to MULTIUBI_BUILD and
IMAGE_FSTYPES that result in building ubi and ubifs images.
These are redundant and not needed since meta-digi's
'image_types_digi.bbclass' already generates the needed ubifs images.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8714
ARM64 generic overrides where in the middle of the chain with more
precedence than IMX overrides.
From:
MACHINEOVERRIDES="imx-generic-bsp:imx-nxp-bsp:imxdrm:imxpxp:mx9-generic-bsp:mx9-nxp-bsp:mx93-generic-bsp:mx93-nxp-bsp:ccimx93:ccimx93:aarch64:armv8-2a:use-nxp-bsp:ccimx93-dvk"
To:
MACHINEOVERRIDES="aarch64:armv8-2a:use-nxp-bsp:imx-generic-bsp:imx-nxp-bsp:imxdrm:imxpxp:mx9-generic-bsp:mx9-nxp-bsp:mx93-generic-bsp:mx93-nxp-bsp:ccimx93:ccimx93:ccimx93-dvk"
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These are files for programming images with STM32CubeMX tool.
We don't use the tool or the files. Remove the task to avoid build
warnings.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
BOOTDEVICE_LABELS defines the supported boot device (NAND by default).
BOOTSCHEME_LABELS defines the which kind of boot is supported.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
We will use BOOTDEVICE_LABELS as a means to add 'sdcard'
configuration to TF_A_CONFIG within meta-st-stm32 so there
is no need to have a wrapper variable in meta-digi.
This reverts commit 7cf314ba80.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
We will use BOOTDEVICE_LABELS as a means to add 'sdcard'
configuration to TF_A_CONFIG within meta-st-stm32 so there
is no need to have a wrapper variable in meta-digi.
This reverts commit c6f19a099c.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Digi's mechanism to use a custom Linux kernel defconfig is
based on setting the variable KERNEL_DEFCONFIG, however ST
implements their own mechanism with a custom variable
KERNEL_EXTERNAL_DEFCONFIG. When providing an external defconfig,
the variable needs to be set, otherwise a build error
will be generated. So to keep compatibility with NXP
platforms, this commit weakly assigns KERNEL_EXTERNAL_DEFCONFIG
to a default value "defconfig".
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
ConnectCore Cloud Services examples are included in 'dey-examples' repository
so they can be built from here and also imported in Eclipse/Digi Application
Development Environment for Linux with the samples wizard.
The example 'upload_file' has been removed since currently there is no support
for binary data points in the CCCS daemon/client model.
https://onedigi.atlassian.net/browse/DEL-8628
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
This recipe generates several packages:
* 'cccs' includes the CCCS shared library
* 'cccs-daemon' includes the binary and resources to execute the CCCS daemon
(daemon, service and init scripts, configuration file)
* 'cccs-cert' includes the required certificate to use CCCS daemon
* 'cccs-gs-demo' includes the binary and resources to execute the CCCS get
started demo (binary, service and init scripts)
* 'cccs-legacy' includes the binary (all-in-one) application to execute
the legacy CCCS application (aka cloud-connector) and the configuration
file
* 'cccs-legacy-dev' includes resources to develop legacy CCCS applications
(all-in-one) (header files inside 'cloud-connector' and 'cloudconnector.pc'
pkg config file)
* 'cccs-legacy-staticdev' includes static resources to develop legacy CCCS
applications (all-in-one) (static library)
This commit also renames:
* 'CLOUDCONNECTOR_PKGS' variable to 'CCCS_PKGS'.
* 'CC_DEVICE_TYPE' variable to 'CCCS_DEVICE_TYPE'.
https://onedigi.atlassian.net/browse/DEL-8628
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
All the 'altboot' script functionality has been moved directly to the 'altbootcmd' command
in U-Boot, so this script is no longer necessary. Remove it for all platforms.
https://onedigi.atlassian.net/browse/DEL-8674
Signed-off-by: David Escalona <david.escalona@digi.com>
Now in the ccmp1X platform the index for the data partition is
hosted in the ubi1 volume instead of the ubi0.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
The STM32MP15 SoC can only use one sign key.
Forcibly set TRUSTFENCE_KEY_INDEX on the machine conf so
that it cannot be overriden by mistake on the local.conf.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Commit 7cf314ba80 made a weak assignment of TF_A_CONFIG in the machine
config file, so that it could be overriden from conf/local.conf with a
straight assignment. However, this variable already has a weak assignment
on include files for the tf-a-stm32mp recipe, which apparently take
precedence over the machine files.
This commit creates a new variable DEY_TF_A_CONFIG in the machine config,
and then uses a straight assignment of TF_A_CONFIG to the new variable on the
tf-a-stm32mp.bbappend.
This allows users to override the machine default and avoids the STM recipe
weak assignment.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This wks file creates the required GPT and partition layout
to have a bootable SD card with the following partitions:
- fsbl1
- fsbl2
- metadata1
- metadata2
- fip-a
- fip-b
- u-boot-env
- linux
- rootfs
- data
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8120
Equivalent commits in meta-freescale:
71d2a1ad49a3e04d0d401d4e9c52d5a50105b6dc
995f2f0a86da9428af348e72e51beb5063ebd729
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Javier Viguera
David Escalona
Isaac Hermida
Hector Bujanda
Hector Palacios
Gabriel Valcazar
Mike Engel
Arturo Buzarra
Francisco Gil
Tatiana Leon