A new set of meta-freescale updates broke our layer, because they
updated opencv package and our bbappend does not apply anymore.
The build fails at parsing:
ERROR: No recipes in default available for:
meta-digi/meta-digi-dey/dynamic-layers/freescale-layer/recipes-support/opencv/opencv_4.5.2.imx.bbappend
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This allows users of the layer to override the value with a different
default. Same change was done in meta-freescale's imx-base file.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
When read-only feature is enabled, the rootfs should be .squashfs
and not .ubifs.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
(cherry picked from commit c32278af74cea8cb38aa81590eaa867be1c739c9)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
All the dualboot logic will be checked in run time.
To do this:
* Include the altboot.src by default in all the images
* Create a post installation script to change the
firmware_download_path in the cloud connector
* Unify the swupdate file descriptor for dual and single boot
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
This commit removes duplicated and unused build artifacts for the ccmp1
platforms. Also fixes a build warning related with flashlayout config file.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This override is used in STM BSP layer on some recipes. Adding it to our
machines fix a build failure on the gcnano-driver-stm32mp recipe.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit adds the extra machine specific configuration files for udev on
ccmp1 platforms to allow, for example, automount storage devices.
https://onedigi.atlassian.net/browse/DEL-8193
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit changes the arm-trusted-firmware build configuration to only build
one ATF artifact.
It will create an image that boot over USB and NAND.
https://onedigi.atlassian.net/browse/DEL-8187
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Set 'UBOOT_HAS_FASTBOOT=true' on CCMP1 platforms and therefore add the
UUU installation script to the installer ZIP file.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Also clean some dead code: libjpeg-turbo is the only jpeg implementation
in poky since long ago. Also "remove-libtool" is enabled by default in
bitbake so there is no need to do it in our distro configuration.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Explicitly set this variable to keep some necessary scripts in /etc/init.d and
set a "softer" assignment to allow override it.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The recipes have been updated in meta-freescale, and version 1.18.5.imx
is no longer available.
Follow same change in meta-freescale's "conf/machine/include/imx-base.inc".
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This fixes a failure in the firmware installation script when trying to
program crank images:
./install_linux_fw_uuu.sh -i dey-image-crank
[ERROR] Could not find file 'dey-image-crank-ccimx6ulsbc.boot.ubifs'
[ERROR] Could not find file 'dey-image-crank-ccimx6ulsbc.recovery.ubifs'
[ERROR] Could not find file 'dey-image-crank-ccimx6ulsbc.ubifs'
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
meta-freescale updated to version '10.0.0.imx', so our bbappend fails
with:
ERROR: No recipes in default available for:
... meta-digi-dey/dynamic-layers/freescale-layer/recipes-graphics/wayland/weston_9.0.0.imx.bbappend
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
By default STM layer creates extra partitions, the vendorfs partition is
reserved to save custom STM libraries and binaries, however the ccmp15 platform
does not have this additional partition, and stores all the libraries in the
rootfs.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Also, fix the sequence number of the GPIO_SET_DEBOUNCE_IOCTL ioctl. Same
fix has been done in Linux.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* fix arch tune files path in machine config
* update imx-digi-base config file (using as a base the imx-base.inc
config file in 'meta-freescale')
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
By default, the STM layer includes several tools in the SDK, one of which is
the gcc-arm-none-eabi toolchain. However, in the build process it throws the
following unexpected error about an unsatisfied runtime dependency:
Error:
Problem: conflicting requests
- nothing provides libpython2.7.so.1.0()(64bit) needed by
nativesdk-gcc-arm-none-eabi-9-r0.1.x86_64_nativesdk
Since this package works with python3, python2 was deprecated and this tool is
only needed to build Cortex-M4 applications, this commit removes this package
from the default SDK.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This platform initializes the Bluetooth interface through the own bluetooth
driver, so the custom Digi init scripts are not needed.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit changes the "Image" for the "zImage" as the default kernel image
type for the STM platform.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Hector Palacios
Javier Viguera
Gonzalo Ruiz
Francisco Gil
Arturo Buzarra
Mike Engel