Also remount the root filesystem as 'rw' when the symlinks need to be
updated.
https://jira.digi.com/browse/DEL-6760
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Obtain the mount point of the filesystem to remount as 'read-write' from
/proc/mounts to avoid issues related to df output wrapping on a second line
when the device filesystem name is too long.
When the script finishes, remount the filesystem as 'read-only' if that was
the original access permission.
https://jira.digi.com/browse/DEL-6760https://jira.digi.com/browse/DEL-5854
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Generalize script to select the correct board data file to load into the
wireless chip depending on the Regulatory Domain configuration whether it
is a variation of 'bdwlan30.bin' or 'fakeboar.bin'.
If 'bdwlan30_US.bin' or 'bdwlan30_World.bin' files are found in the firmware
directory, the script will create two symlinks, 'bdwlan30.bin and 'utfbd30.bin',
pointing to either one of those files.
If no 'bdwlan30_*.bin' files are found, but 'fakeboar_US.bin' or
'fakeboar_World.bin' is, it will create a single symlink, 'fakeboar.bin',
pointing to either one of those files. In the case a QCA6574 community driver
is loaded, 'board.bin' symlink will be updated.
If no 'fakeboard_*.bin' files are found either, the script will exit.
https://jira.digi.com/browse/DEL-6773
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Error message was being printed upon successful copy of the
MAC addresses file, instead of upon failure.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Otherwise, users that are behind corporate firewalls might not be able to
obtain the package sources.
https://jira.digi.com/browse/DEL-6663
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
On some scenarios, like when booting from NFS, the root filesystem is not
writteable. When this happens the qualcomm.sh is not able to write the MAC
file which so the wireless driver fails to load.
The arguments that U-Boot uses when booting from NFS using dboot result in
the root filesystem being mounted as read-only, but at some point it is
remounted as read/write. This happens after trying to load the wireless
driver, though.
Currently this is the only scenario in which we can reproduce the problem,
and there are several other processes in DEY that require a writeable root
filesystem (wireless SSID editing, Dropbear SSH key-gen and u-boot-fw-utils)
so remount the rootfs as writteable as a workaround.
While on it improve the script a bit to notify on error trying to create
this file, just in case this happens in other scenarios.
https://jira.digi.com/browse/DEL-5854
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
All the dependencies of the required symbols are also added.
These are easier to mantain and enable the minimum support. If extra
features are required they shuold be explicitly added.
https://jira.digi.com/browse/DEL-6681
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
When using virtualization, ammend the kernel configuration so that docker
is supported.
https://jira.digi.com/browse/DEL-6681
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Even though our ccimx6 and ccimx6qp images were using Linux v4.9 sources
correctly, they were using the same recipe as our images with Linux v4.14.
Technically, both recipes are identical (save for the branch name), but each
Linux version should have its own recipe.
Also, make sure that ccimx6/ccimx6qp images are built with our version of the
linux-imx-headers recipe instead of the one in meta-freescale.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We want to run the script if the 'wireless' node exits on the device tree.
This is to facilitate disabling of the wireless by removing that node.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6616
P2P disabled is the default in the kernel module, so passing here the
parameter to 'modprobe' does nothing but prevents to set the parameter
in the kernel command line.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The new development branch is based on NXP's v4.14.98 BSP.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This recipe's package is meant for packages that require NXP-specific linux
headers.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Digi Embedded Yocto 2.6-r1.3
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Remove the linux-v4.20 recipe and use the linux-fslc kernel recipe in
meta-freescale-3rdparty instead.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Add kernel module parameter to enable/disable the p2p interface.
By default p2p interface is disabled.
https://jira.digi.com/browse/DEL-6503
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The naming of branches in the qcacld repository is now in the qca65x4
namespace.
Also, the qca6564/master branch now does not hardcode the TX MCS to 0 as
this change should only apply to the CC6UL and not other platforms like
the CC6+.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Device tree files no longer have the kernel type prefixed to their name, so the
trustfence_sign() function must be updated to reflect this change or else
errors will occur.
https://jira.digi.com/browse/DEL-6476
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The driver now builds directly from the kernel source and the
fixes are already included in the kernel tree so there is no need
to build the module externally.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6460
(cherry picked from commit a0990a7e1dcd03af239efb620b83b7dee126484e)
KERNEL_IMAGE_BASE_NAME was replaced by KERNEL_IMAGE_NAME for
consistency between variable names.
https://jira.digi.com/browse/DEL-6443
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
new version allows building multiple flavors of the kernel and
module packages by templatizing kernel package names via a new
KERNEL_PACKAGE_NAME variable in kernel.bbclass.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This error only appears when the build host does not have the openssl
development libraries (libssl-dev) installed. If they are, the build
process will use them.
The error is:
|
/home/builder/jenkins/workspace/dey-rocko-use-mainline-bsp/projects/ccimx6ulsbc/tmp/work-shared/ccimx6ulsbc/kernel-source/scripts/extract-cert.c:21:25:
fatal error: openssl/bio.h: No such file or directory
| compilation terminated.
| scripts/Makefile.host:90: recipe for target 'scripts/extract-cert'
failed
| make[3]: *** [scripts/extract-cert] Error 1
| make[3]: *** Waiting for unfinished jobs....
This commit makes openssl-native a dependency and passes the include
path to the build.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Just add the following to the conf/local.conf file:
MACHINEOVERRIDES .= ":use-mainline-bsp"
The defconfig is the mainline imx_v6_v7_defconfig.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Currently the contents of FILESEXTRAPATHS and the actual paths being used for
the patch files are not aligned. That generates the following WARNINGs:
imx-gst1.0-plugin_4.3.4.bb: Unable to get checksum for imx-gst1.0-plugin SRC_URI entry 0001-gstimxv4l2-map-dev-video1-to-dev-fb0.patch: file could not be found
kernel-module-imx-gpu-viv_5.0.11.p8.6.bb: Unable to get checksum for kernel-module-imx-gpu-viv SRC_URI entry 0001-mxc-gpu-use-recommended-values-for-minimum-GPU-frequ.patch: file could not be found
kernel-module-imx-gpu-viv_5.0.11.p8.6+fslc.bb: Unable to get checksum for kernel-module-imx-gpu-viv SRC_URI entry 0001-mxc-gpu-use-recommended-values-for-minimum-GPU-frequ.patch: file could not be found
Also, those patches are not being applied.
This patch fixes FILESEXTRAPATHS to contain the actual paths being used.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
(cherry picked from commit 4d35d15fee)
Digi Embedded Yocto 2.4-r2.4-beta
Manually changed recipes to use the master branches instead of the
fixed SHA1 from the last release.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Arturo Buzarra
Gonzalo Ruiz
Hector Palacios
Gabriel Valcazar
Jose Diaz de Grenu
Javier Viguera
Alex Gonzalez