The bbappend was created mostly to install an old version of the
'simple-agent' test application (the one included in the package was
failing) but upstream (Poky) has fixed most of the issues, so our
bbappend is just needed now to enable 'health' profile support.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The 1.5+snapshot.new tag does not work, so until there is an official 1.6
release use the last 1.5.1 SDK.
Fixes https://jira.digi.com/browse/DEL-988
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This packages was removed from 'meta-fsl-demos' and it's needed in our
graphical image, so for the moment add it to meta-digi-dey layer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Rework the conditional expression so the overall return value of the
script is not failure, because in that case the 'ifup' command fails
with:
run-parts: /etc/network/if-up.d/ifup exited with code 1
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This cleans following warning:
Use of PRINC is deprecated.
The PR server should be used to automatically increment the PR.
See: https://wiki.yoctoproject.org/wiki/PR_Service
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The purpose of this bbappend was just to remove the 'connman-gnome'
network manager that is the default in sato.
This can be done also in the distro config file without the need for a
recipe bbappend.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is needed in order to use eclipse as a graphical debugging IDE with
the Yocto eclipse plugin.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The adt-installer will use this tag to access content from
http://adtrepo.yoctoproject.org/, so the tag must be an existing folder.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
So the output of 'reboot' command does not spread over different lines.
This is basically a cosmetic change to make target's output on reboot a
bit more beautiful.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
'/run/vsftpd/empty' directory is created at runtime via volatiles
bootscript under /run TMPFS.
Workaround error:
ERROR: QA Issue: vsftpd: Files/directories were installed but not shipped
/run
/run/vsftpd
/run/vsftpd/empty
ERROR: QA run found fatal errors. Please consider fixing them.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These files were needed in previous versions of Yocto to overcome
different problems. Remove them as the default ones in current Yocto
version are good enough for our platforms.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Fix following error:
Warning: EGL suggested using X Visual ID 33 (ARGB0888) for EGL config 28 (ARGB0444), but this is incompatable
Unable to find an X11 visual which matches EGL config 28
https://jira.digi.com/browse/DEL-964
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We use udev as device manager both for minimal and graphical images so
there is no need for these mdev extensions anymore.
https://jira.digi.com/browse/DEL-944
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
rtc_test now can run with minutes instead of seconds resolution. This
is needed for RTCs that trigger the alarm on the minute register.
It also allows to override the default timeout from the command line.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add the machine specific files for the ccimx6adpt platform. Initially
they are copied form the ccardimx28js as it is also planned to use
an Atheros chipset.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
After the upstream commit in d63c8a1597c9bd0a838cb59ca461ac432b630a90,
bitbake checks to see if the image feature has a valid packagegroup
associated.
For this check to work dey features need to be defined for all images,
not only dey images, so the definitions need to move to the distro
configuration file.
https://jira.digi.com/browse/DEL-852
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also make DEY image recipes more robust to misconfigurations, by setting
explicitly the required and conflict distro features.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
nvram, ubootenv and update_flash are machine related utilities. They
need to be configured per-platform via MACHINE_EXTRA_RDEPENDS and thus
leaving packagegroup-dey-core as much platform-agnostic as possible.
This also allows to skip these utilities for platforms not using them.
https://jira.digi.com/browse/DEL-915
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These utilities are very tight to the hardware so they need to be in
the BSP layer. This way they can also be installed in a poky distro
core-image-minimal without meta-digi-dey layer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
SERIAL_CONSOLE variable has been deprecated in poky. The new
SERIAL_CONSOLES allows to configure multiple devices.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Features without a valid packagegroup need to be added to the
validitems list.
This needs to be in the distro configuration file as it needs to be
available to all images from all layers.
https://jira.digi.com/browse/DEL-853
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Virtual keyboard was not showing up when clicking on the keyboard icon
in the menu bar. The reason was the keyboard xsession script was not
being run on X startup due to the extension '.shbg' of the original
script.
https://jira.digi.com/browse/DEL-911
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of using a SHOWCURSOR variable hardcoded from the
HAVE_TOUCHSCREEN environment var, allow to set it freely in formfactors
config file and use it to show (or not) the cursor in the graphic
session.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This comes from the old Danny release where pulseaudio in minimal image
was giving a build failure (probablye due to dependences on X libraries)
This is not true anymore in Dylan, so just remove it for easier
maintenance.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Give priority to FSL AAC decoder over others from the community when
using gstreamer's playbin2 or gplay
This allows to play some videos that fail otherwise.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Without the fix if we only configure *one* display in the vssconfig file
(i.e. we set just one entry in that file) the patch was discarding that
configuration and overwriting the configuration with dual display
defaults.
But configuring a single display in vssconfig should be doable, so fix
the patch to allow that.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We found that the gst-fsl-plugin package from Yocto is not exactly the
same than the one we used in DEL even though they have the same
version.
We think the one we used in DEL (released by FSL via LTIB) is more
recent and has some fixes, so create a first patch that applies on top
of the one in Yocto and convert it to the one in DEL.
Also instead of appending new patches to meta-fsl-arm SRC_URI, override
completely the variable and add the patches from meta-fsl-arm layer in
our own layer.
The final result is: we use the yocto tarball, then apply a first patch
that converts it to the one in DEL/LTIB, then apply the patches from
meta-fsl-arm and finally the ones added by us.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also remove 'gplay' utility from dey-image-graphical. It's a command
line application suitable to be used on minimal (non-X) images.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Fix the patch that adds support to select the framebuffer for
mfw_v4lsink. This used to work on non-graphical images (non-X), but it
had the side effect of breaking playing accelerated videos on graphical
images (using X) with graphica applications (QT, GTK).
This fix simplifies the patch so it still adds the dual display
functionality while not breaking the graphic media player applications.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Disable integer vorbis plugin as it conflicts with other vorbis
plugins. Error:
error: GLib-GObject-WARNING **: cannot register existing type `GstVorbisDec'
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
wpa_supplicant v2.0 was not available in Danny so we needed the whole
recipe, but it was updated in Dylan, so now we just need the bbappend.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The source has machine specific code, so it needs the machine passed
in the compiler command line.
https://jira.digi.com/browse/DEL-863
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
So the IMX udev rules can be used without meta-digi-dey layer. For
example when building core-image-minimal with poky distro.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
They conflict.
Warn the user about the problem and let they change the device tree
manually.
https://jira.digi.com/browse/DEL-840
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Some test applications (e.g. gpio_test) use static device nodes. This
commit adds a bootscript that creates such device nodes reading from a
config file.
https://jira.digi.com/browse/DEL-458
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Simplify the package for maintainability and fix some minor things.
https://jira.digi.com/browse/DEL-818
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This package provides 'ubiformat' command which is needed by
'update_flash' for UBI images.
https://jira.digi.com/browse/DEL-816
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We are now using the standard yocto kernel headers so the patch to build
the plugin with new kernel headers is not needed.
The rest of the changes in the bbappend (removing gconf dependence) were
needed in yocto-danny, but not in yocto-dylan because the gconf package
does not depend on libx11 anymore.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is hidden using Poky distribution because Poky has X11 distro
feature and then other x11-related dependences pulls in intltool-native.
In our case DEY distro does not have X11 feature and thus
intltool-native is not part of libsoup dependences. Then sometimes fails
and sometimes not depending on the bitbake threads (BB_NUMBER_THREADS)
and other race conditions.
Adding the dependence explicitly fixes:
run.do_configure: intltoolize: command not found
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The availability of some examples depends on the kernel version, so we
need to add the dependence to the packagegroup as well.
This allows to build two ccardimx28 projects one for kernel 2.x and the
other for 3.x sharing the state-cache. Otherwise the first project
builds correctly but the second one fails.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
In ccardimx28 depending on the kernel version the console is on 'ttyAM0'
or 'ttyAMA0'. Use the standard serial port name ttyS0 for login (through
inittab) and let the device handlers create the symlink to the correct
device.
This allows to boot the same rootfs regardless of the kernel version.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
wmiconfig is Atheros proprietary code so the recipe builds from source
if DIGI_INTERNAL_GIT is defined or uses a prebuilt binary otherwise.
https://jira.digi.com/browse/DEL-640
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
'simple-agent' python script included with this package depends on
python-pygobject and python-dbus
https://jira.digi.com/browse/DEL-643
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The initscripts package includes a '/etc/init.d/umountfs' script used
for reboot/poweroff purposes. That script calls the 'umount' command
but seems that the combination of busybox' umount + linux-3.x fails in
this script (it hangs without completing the reboot/poweroff).
So as a workaround use the umount command from util-linux package
https://jira.digi.com/browse/DEL-633
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Alex Gonzalez
Javier Viguera