The cellular interface is now managed by NetworkManager, so there is no
need for this custom script.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
After 0e7f5d3a47 both platforms probe both ports,
which is problematic (for example, ttymxc4 is the console in the 6UL based
platforms).
Use more concrete rules to avoid that problem.
https://jira.digi.com/browse/DEL-4199
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
After the kernel update (v3.14 to v4.1) the sysfs path changed from:
/devices/soc0/soc.0/2100000.aips-bus/21f4000.serial/tty/ttymxc4
to:
/devices/soc0/soc/2100000.aips-bus/21f4000.serial/tty/ttymxc4
which caused the XBee Cellular not to be detected on the new kernel. These more
general rules are compatible with both kernels.
https://jira.digi.com/browse/DEL-4199
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
QMI modems didn't work with the version of
modemmanager that the dey-2.2-r1 release was
using.
We were using two patches for uBlox plugin to use XBee Cellular 3G
that are now merged in modemmanager master.
This updates modemmanager to use the commit where QMI
problem was fixed and also include uBlox patches.
https://jira.digi.com/browse/DEL-4192
Signed-off-by: Salvador Penalva <salvador.penalva@digi.com>
Add patch to MM, so it detects the U-Blox modem connected to the XBee
socket.
https://jira.digi.com/browse/DEL-4084
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The XBee Cellular needs more time to settle down before MM is able to
detect it on boot. As this is connected to one of the 'ttymxc' serial
ports, use that port to conditionally delay the launch of MM.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Adding more retries to the port AT probing has an impact in modems not
using serial drivers (for example using qmi, mbim). It takes longer for
MM to detect those modems and then user space gives up waiting for the
modems to be available.
This reverts commit 682d77e414.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Launching the MM on target's boot fails to detect the XBee cellular
because this needs more time to complete the initialization. So add some
more retries for the AT port probing to allow the XBee cellular to be
detected.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of redirecting the MM logging to '/dev/null' use a file, so we
can see what's going on in case of failure.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The flow control patches have been merged to the master branch, so
update the revision to remove those patches from our layer.
This reverts commit a7c51af5b8.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The XBee cellular support is at the moment only in modemmanager's git
repository (master branch).
Also remove one Telit patch from the bbappend because it's already
included in the git repo.
https://jira.digi.com/browse/DEL-3841
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The unlock retries feature from the Telit plugin does not work properly with
old versions of the Telit HE910 firmware. This has been fixed in upstream
commit: fbb607f0c25be3a4bb8692ee48445cf437345b6c
Signed-off-by: Salvador Penalva <salvador.penalva@digi.com>
https://jira.digi.com/browse/DEL-3863
This reverts commit 3123085e72.
we revert this commit because the patch was already applied on mm-1.6.4
Signed-off-by: Salvador Penalva <salvador.penalva@digi.com>
This commit fixes an issue with ModemManager to return the correct
error code when an invalid QMI command is send to the modem.
There are two ways to get the UIM/SIM status, one with the "DMS"
service that works on most devices from 2015 and earlier, and a
new way with the "UIM" service that works on many 2015+ devices.
Perhaps the EC21 is new enough that it requires the UIM service,
but ModemManager doesn't recognize the error code that it's returning.
There are two ways to get the UIM/SIM status, one with the "DMS"
service that works on most devices from 2015 and earlier, and a
new way with the "UIM" service that works on many 2015+ devices.
Perhaps the EC21 is new enough that it requires the UIM service,
but ModemManager doesn't recognize the error code that it's returning.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3748
The autotools class is trying to execute:
intltoolize --copy --force --automake
so there is a intltool-native dependency.
Fix:
run.do_configure: intltoolize: not found
ERROR: Function failed: do_configure
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Javier Viguera
Diaz de Grenu, Jose
Salvador Penalva
Tatiana Leon
Mike Engel
Jose Diaz de Grenu de Pedro