The recovery init checks if the configured update package exists and it is valid
before setting a new key and/or formatting the rootfs partition.
This change avoids getting non-booting devices after performing a firmware
update with a non-existing or invalid update package.
https://jira.digi.com/browse/DEL-3959
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
We have introduced new default configuration files for wireless that do
not show on sysinfo, so add them if they exist.
https://jira.digi.com/browse/DEL-3974
Signed-off-by: Alejandro Navarro <alejandro.navarro@digi.com>
These new US and world board data files contain new settings updated
with the latest certification results including the 2 dB power reduction
from DVT.
md5sums:
a5635e39aaaa220094e0d07f7a4f4567 bdwlan30_US.bin
cabebad84a6afc1c2a7d795d31dda480 bdwlan30_World.bin
https://jira.digi.com/browse/CC6UL-740
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Variant 0x04 has wireless and must select the '-wb' device tree.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-4100
The XBee cellular support is at the moment only in modemmanager's git
repository (master branch).
Also remove one Telit patch from the bbappend because it's already
included in the git repo.
https://jira.digi.com/browse/DEL-3841
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This version of libqmi is needed for newer versions of ModemManager.
Remove bbappend and patch to previous version as the patch is now
included in the new version.
https://jira.digi.com/browse/DEL-3841
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The current script cannot launch the hostapd twice (for dual HostAP mode)
because start-stop-daemon finds an already existing PID for hostapd after
running the first instance.
The solution is:
- Do not launch the hostapd in background (so that it does not fork the
process, which assigns a different PID)
- Use -b option of start-stop-daemon so that it launches the daemon in
the background.
- Let start-stop-daemon create the PID (since the hostapd will not fork
now this PID will match the hostapd process, allowing to kill it later)
This solution also hides the hostapd log messages that appeared before.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-4045
Add support to build U-Boot for variants with 1GB DDR3.
Add support in U-Boot install firmware script to select the
U-Boot artifact to use basing on variant.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3970
The original init script hardcodes the configuration file to use so it
cannot be re-utilized for concurrent AP/AP mode where two interfaces can
be used as SoftAP.
This commit uses the variable ${IFACE} to:
- select a specific configuration file per interface:
/etc/hostapd_${IFACE}.conf
- create a specific PID file per interface:
/var/run/hostapd.${IFACE}.pid
With this, the /etc/network/interfaces can use the script for using SoftAP
in different wireless interfaces.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The firmware configuration and the driver configuration are part of the
driver repository. Stop duplicating the content in meta-digi so they
are updated with the driver itself.
https://jira.digi.com/browse/DEL-4021
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
With the migration to Morty, some of the paths to the artifacts (boot
and rootfs images) need to be updated.
While on it, also remove the temporary README.txt file which is not
needed after it has been packed in the zip installer.
https://jira.digi.com/browse/DEL-4013
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
- The Bluetooth daemon was always executed before setting up the
hardware, generating several problems specifically in the CCIMX6SBC.
This was causing the Bluetooth driver to override the Bluetooth name
and alias, as well as avoiding any host function on Bluetooth profiles.
Only pairing and ping was working, as well as client profile sides.
- This change also fixes some issues in the CCIMX6UL platforms with the
Bluetooth daemon failing to perform several bluetoothctl operations.
https://jira.digi.com/browse/DEL-4000https://jira.digi.com/browse/DEL-4015
Signed-off-by: David Escalona <david.escalona@digi.com>
- Some Python modules are no longer available in DEY-2.2 since
the official supported Python version is now 3. This caused the
HDP application to fail importing some of the old modules. For this
reason the sample application has been updated to use Python3
syntax and modules.
https://jira.digi.com/browse/DEL-3996
Signed-off-by: David Escalona <david.escalona@digi.com>
Print the HW and FW versions for the I/O Expander in the CC6UL SBC platform.
https://jira.digi.com/browse/DEL-3958
Signed-off-by: Sebastian Pastor <sebastian.pastor@digi.com>
- The IVT table address inside the kernel image must be aligned at 0x1000
bytes. The calculation of this offset was not working when the kernel image
size was multiple of 0x1000 bytes. In this case the IVT table was moved an
extra offset of 0x1000 bytes, causing U-Boot to fail to validate the image
as the IVT table was not in the expected location.
This fix uses the same offset calculation algorithm as U-Boot, ensuring both,
the sign script and U-Boot will look for the IVT at the same address.
https://jira.digi.com/browse/DEL-3972
Signed-off-by: David Escalona <david.escalona@digi.com>
These new US and world board data files contain new settings updated
with the latest certification results.
md5sums:
386475740ad0e41f4387eebdf2931c16 bdwlan30_US.bin
d349985b51353f430183f1bf9f6d90d1 bdwlan30_World.bin
https://jira.digi.com/browse/DEL-3950
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This will allow to get the package from a premirror in case it is not
already downloaded in the DL_DIR.
https://jira.digi.com/browse/DEL-3051
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
If the volume is not found, the partition cannot be wiped since it is attached.
Remove 'update' UBI device in:
* mdev automount script if volume is not found
* recovery init script before formatting 'update' partition
https://jira.digi.com/browse/DEL-3962
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
This allows to override the console using the local.conf.
https://jira.digi.com/browse/DEL-2856
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
ICU support was not included in the rootfs in previous DEY versions
but it's included now through runtime dependences of 'harfbuzz' and
'libical'.
The support is not strictly needed, as ICU is a library for Unicode
support for applications:
http://site.icu-project.org/home
This commit disables ICU support directly for 'harfbuzz' and adds a
patch for 'libical' that allows to disable it. Notice that it's only
disabled for the CC6UL, as the CC6 has no rootfs space problems.
Only the 'libicudata' library is 25MB:
25M /usr/lib/libicudata.so.57.1
https://jira.digi.com/browse/DEL-3854
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The unlock retries feature from the Telit plugin does not work properly with
old versions of the Telit HE910 firmware. This has been fixed in upstream
commit: fbb607f0c25be3a4bb8692ee48445cf437345b6c
Signed-off-by: Salvador Penalva <salvador.penalva@digi.com>
https://jira.digi.com/browse/DEL-3863
This reverts commit 3123085e72.
we revert this commit because the patch was already applied on mm-1.6.4
Signed-off-by: Salvador Penalva <salvador.penalva@digi.com>
This commit adds mdev support into the recovery ramdisk to
mount/unmount storage devices for the firmware up tool.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3692
The main purpose is to improve our kits usability. This way users do not need
to follow the steps in the documentation to change from static to DHCP IPs.
https://jira.digi.com/browse/DEL-3821
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
udhcpc's '-n' option means 'Exit if lease is not obtained'.
We want to keep udhcp client alive if lease is not obtained, so when it is
possible, an IP is assigned.
https://jira.digi.com/browse/DEL-3821
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
udhcpc options added to 'network/interfaces':
* '-S' to log to syslog too.
* Redirect the output to '/dev/null' not to show messages of the tool running
in background (for example when executing 'ifup').
* '&' to send the udhcp client to background.
https://jira.digi.com/browse/DEL-3821
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
The amount of patches to this driver maintained in meta-digi is
substantial, so we are moving to a git repository release model.
https://jira.digi.com/browse/DEL-3710
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This is to avoid the following QA error:
ERROR: fbtest-1.0-r0 do_package_qa: QA Issue: No GNU_HASH in the elf binary: '/usr/local/ssd/dey-2.2/workspace/ccimx6ulstarter/tmp/work/cortexa7hf-neon-dey-linux-gnueabi/fbtest/1.0-r0/packages-split/fbtest/usr/bin/fbtest' [ldflags]
ERROR: fbtest-1.0-r0 do_package_qa: QA run found fatal errors. Please consider fixing them.
ERROR: fbtest-1.0-r0 do_package_qa: Function failed: do_package_qa
ERROR: Logfile of failure stored in: /usr/local/ssd/dey-2.2/workspace/ccimx6ulstarter/tmp/work/cortexa7hf-neon-dey-linux-gnueabi/fbtest/1.0-r0/temp/log.do_package_qa.6755
ERROR: Task (/usr/local/ssd/dey-2.2/sources/meta-digi/meta-digi-dey/recipes-digi/fbtest/fbtest.bb:do_package_qa) failed with exit code '1'
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Mike Engel
Tatiana Leon
Alejandro Navarro
Hector Palacios
Salvador Penalva
Alex Gonzalez
Javier Viguera
David Escalona
Sebastian Pastor
Diaz de Grenu, Jose