The common license file GPL-2.0 is now called GPL-2.0-only in poky, so we need
to reflect this name change to avoid errors
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
NXP now uses the meta-freescale version of the imx-boot recipe as a base, and
applies a .bbappend in meta-imx to apply more customizations. Reflect this
in meta-digi-arm and merge said .bbappend with ours. While at it, omit one of
NXP's operations in their do_deploy, since it breaks our build and doesn't look
essential.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This recipe is only compatible with the i.MX8MP EVK, so it might be
platform-specific or board-specific. Add it for now to be safe.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This recipe was missing from our layer, so add it just in case it's needed
by any new package.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update the recipes to v8.14. NXP changed the mechanism used to load the sdma
and regulatory firmware (they now use firmwared), so remove our ccimx8mm sdma
fw service for now and see if we need a similar workaround with the new
mechanism.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Digi Embedded Yocto 3.2-r2.2
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The AHAB decryption process takes the encrypted file from the address defined
in U-Boot and decrypts it into the address defined in this script. If both
addresses are the same, the decryption process ends up failing. This
happens even for signed-only images.
Maintain the original addresses in this script so they do not collide.
This reverts commit c970d87d5a.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
If IMAGE_FEATURE 'read-only-rootfs' is active, the rootfs image
will be SQUASHFS.
Remove other root file system images, such as ext4, ubifs, sdcard.gz
to avoid confusion and use by install scripts.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
U-Boot uses partition names instead of partition indexes for the nand devices.
This commit syncs the boot scripts with the new dualboot variables.
https://onedigi.atlassian.net/browse/CC6UL-1254
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
These folders /mnt/linux, /mnt/update and /mnt/data are
created by the automount_block.sh script. In a read only
system, these folders are not created raising some errors.
Creating these folders solves the issue.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Create this symbolics links in build time instead of doing it
in run-time. This simplifies the system and allows it to work
with read only filesystems.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Before this patch the MAC addresses were read from the device
tree in the qualcomm.sh script executed at init, and a creates
a file where the MAC where located.
In 0a92f5d9e8df644de74e74f152ed6ff3dd8d3369 in the qca driver
the support to read these MAC addresses from the filesystem
was added.
This commits creates the simbolic link between the device tree
and the expected path where the MAC addresses where located, and
gets rid of the file with the MAC addresses.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
mkimage logs are required for signature on CC8X and CC8M platforms. Create a
copy in the 'imx-boot-tools' deploy directory so a prebuilt imx-boot file can
be later signed using the standalone signature procedure.
Build the 'print_fit_hab' target unconditionally so the log is available for
future standalone signature processes.
Also, use 'CONFIG_MKIMAGE_LOG_PATH' and 'CONFIG_FIT_HAB_LOG_PATH' variables to
point to the logs before calling the sign scripts. We no longer require
creating a symbolic link of the log files.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This change was accidentally reverted when merging to dey-3.2/maint, causing
the qualcomm module to be missing in the rootfs.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
By default, all platforms except ccimx6qpsbc work at 400 kHz on the i2c bus
connected to the ATECC508A crypto chip.
https://onedigi.atlassian.net/browse/DEL-7727
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Re-use RAMDISK address for authenticating the rootfs instead
of allocating a new address (if authenticating a rootfs, we're
not using a ramdisk).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Add missing call to 'uuu' and erase the partition before creating
the UBI volumes.
Also add larger timeouts to erase operations.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The config file /etc/fw_env.config is generated dynamically basing on
the partition table and, in the case of NAND-based SOMs, on the NAND
geometry. This is done on a postinst script that modifies the file on the
first boot of the target. Since this is not allowed on read-only-rootfs,
this commit adds a default fw_env.config file to use instead when
read-only-rootfs is enabled.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-7708
This allows the packages to be included in the ccimx6sbc images. While at it,
include the Qualcomm bluez patches in ccimx6 builds. These patches aren't
destructive, they simply add functionality required by the Qualcomm chip, so
they shouldn't have any secondary effects when using the Atheros chip.
https://onedigi.atlassian.net/browse/DEL-7661https://onedigi.atlassian.net/browse/DEL-7666
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Other layers, such as meta-digi-dualboot, may add scripts to this
list on their layer.conf file. Depending on the order and priority
of layers, using a strict '=' here completely overrides previous
values, which is not desired.
Reported-by: Francisco Gil <francisco.gilmartinez@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
- Add the '-m' parameter. Without it, the script doesn't
generate the output merged configuration file, and the
fragments are not applied.
- Fix the if condition. The '*.cfg' expands to a list of
files, but the '-f' only admits one parameter. Use instead
the Python find_cfgs() function.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The variable 'dualboot' (and 'singlemtdsys' for CC6UL) was restored
after the bootcmd that runs the first time after programming U-Boot runs
fastboot again to resume the script.
This is ok for the CC6UL but not for the rest of platforms, that run the
partition script on the bootcmd, *before* running fastboot.
Restore the variables for all platforms in the bootcmd right after
resetting the environment.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
U-Boot has embedded support to handle bootcount tries.
When the limit of tries is reached, U-Boot runs the script
in `altbootcmd` rather than the usual `bootcmd`.
This other script resides on meta-digi-dualboot layer.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Ensure stdout redirection to the USB interface is removed in every case.
Otherwise, it would be left redirected when INSTALL_UBOOT_FILENAME is
manually set.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Install scripts may rework the partition table basing on the value of
env variables. Information of UBI volumes may remain on the NAND that
could later not correspond to the new partition table.
Make sure the MTD partitions are erased prior to updating:
- For Multi-MTD, append '-e' option to the update command.
- For Single-MTD, erase the system partition.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Check the status of 'dualboot' env variable.
If set to "yes", use the dualboot partition table in the script and
restore the variable (default is "no") after resetting the environment.
Also, for dualboot, there's no need to wipe the recovery partition or
boot into recovery mode.
For dualboot, this script programs both systems A and B with the same
images.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-7649
Commit c33fc8a7fe wrongly used
https protocol when using MTK remote when it should have been
ssh.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This is necessary for images that have SELinux enabled. Aside from changing
some package configurations and including an additional library in the rootfs,
this change has no apparent effects on the core functionality of the system.
https://onedigi.atlassian.net/browse/DEL-7641
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This allows users to apply small changes to our kernel configuration without
having to create a completely new defconfig. Use a simplified version of the
kernel-yocto.bbclass implementation.
https://onedigi.atlassian.net/browse/DEL-6706
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The default policy provided by meta-selinux breaks a lot of the features in
DEY, so adapt it to make most features work. Note that this is simply an
example, end users should create their own policies for their own needs.
Make these changes toggleable so that users can use the reference policy
instead.
https://onedigi.atlassian.net/browse/DEL-7641
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This package includes a script that is executed by a udev rule that we
currently include in our sysvinit images. Without it, the regulatory firmware
mechanism is broken and an error appears when booting the system.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When we added the SDMA fw systemd service, we accidentally made it so that all
scripts were installed only when using systemd. These files are still needed
when using sysvinit, so correct this change.
While at it, include the SDMA fw service in firmware-imx-sdma's FILES.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When DualBoot mechanism is enabled and an update is pending,
the boot script needs to change certain variables and save the
environment.
The regular boot script already changes a number of variables,
such as 'extra_bootargs' and 'overlays' by appending strings to
the already existing values. Saving the envionment may make these
grow endlessly with each iteration of the boot script.
For this reason, move the DualBoot check as the first thing in
the script, save the environment if needed, and then continue
with the normal flow, that changes variables before booting
but doesn't save them.
On certain scripts, this allows us to get rid of some instructions
for resetting the overlays variable.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The script required the passing of option '-b' for setting up the
target to use a single MTD partition and multiple UBI volumes.
If a target however already has the variable 'ubisysvols' set to
'yes' but this parameter is forgotten when calling the script, the
partition layout would change to default (several MTD partitions).
Remove the recently added '-b' option and make the script decide
basing on the current value of 'ubisysvols' variable.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The script preserves the current value of env variable 'ubisysvols'
so that the new partition script generates the appropriate partition
table before proceeding with the update operations.
If using a UBI volumes layout, the script will not erase the partitions.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-7614
With U-Boot supporting the creation of mtdparts and UBI volumes depending
on the value of variable 'ubisysvols', adapt the install script to make
use of those to generate a partition table and UBI volumes accordingly.
This can be triggered with new option '-b'.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Set the new variable 'rootfsvol' to rootfs_a or rootfs_b when dualboot is
enabled, to cover the case where the devices uses the 'system' partition
with different UBI volumes.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The support for dualboot was integrated on meta-digi-dualboot layer, but it
really depends only on environment variable 'dualboot' so we'd better
integrate the support on the scripts in meta-digi, to avoid synchonization
problems between both layers.
This also allows to be able to easily enable dualboot in U-Boot with the
variable, without needing to update the script on the linux partition.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Traditionally, platforms based on NAND, used one UBI volume
per MTD partition.
Now it's possible to use only one MTD partition containing many
UBI volumes.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-7614
Enabling DIGI_INTERNAL_GIT defaults to LOG server. The build from local
MTK Digi server was broken.
Fix uboot and linux recipes declaring different repo paths depending on
whether the local remote is LOG or MTK.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This package includes a script that is executed by a udev rule that we
currently include in our sysvinit images. Without it, the regulatory firmware
mechanism is broken and an error appears when booting the system.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When we added the SDMA fw systemd service, we accidentally made it so that all
scripts were installed only when using systemd. These files are still needed
when using sysvinit, so correct this change.
While at it, include the SDMA fw service in firmware-imx-sdma's FILES.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This command was already present on the script used for CC8X. Add it here
so the scripts are as much alike as possible.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Fastboot is configured on boot with the current MMC configuration.
If we create a GPT partition table, we need to restart fastboot before we
try to program any partition with the 'flash' fastboot command.
Set 'fastboot_dev' to a different device, 'sata' for example an back to 'mmc'
to trigger a fastboot restart after creating the partition table on blank
devices.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Includes:
- add support for getting properties from the ROM bootloader.
- flash layout extra check by asking flash size to the MCA bootloader.
- flash layout extra check by asking flash size to the MCA.
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
The current syntax only works properly when running the script through bash.
Change this so that it works for other shells as well.
While at it, fix a typo in the message that appears when the variant can't be
detected in the 6UL script.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We document how to use this script from the Yocto image directory. Now that the
*.ext4 files are compressed by default, the script needs to automatically
decompress said files before starting the update process.
https://onedigi.atlassian.net/browse/DEL-7582
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These images are comprised of the bootloader, linux and rootfs images. Since
the rootfs images are highly compressable, we can compress the .sdcard file as
well to reduce the space taken up by build artifacts.
https://onedigi.atlassian.net/browse/DEL-7582
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Since these images are highly compressable, this greatly reduces the amount of
space taken up by build artifacts.
Modify the code used to generate the .sdcard and .installer.zip files so that
they contain the decompressed .ext4 image.
https://onedigi.atlassian.net/browse/DEL-7582
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit adds the Edge TPU simple camera examples to exercise the Google
Coral devices with Digi Embedded Yocto.
https://onedigi.atlassian.net/browse/DEL-7547
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds the required libraries and packages to exercise the Google
Coral devices with Digi Embedded Yocto.
https://onedigi.atlassian.net/browse/DEL-7547
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The install script of cc8x had errors (using double '==' instead
of single on comparisions).
Besides fixing this typo, this commit changes the logic to:
- default to 2GB U-Boot for variants other than the ones in the
list.
- consider variant code 0x00 (not programmed HWID) as a failure.
thus forcing the user to specify the file on the command line.
This second action is done also on the cc6ul script.
Reported-by: Hector Bujanda <hector.bujanda@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Update US Board Data File to include the changes required to pass the
EN 300 328 V2.2.2 blocking test.
The new BDF is:
- bdwlan30_US.bin (24140b5c28256cadfd95bc28fc574733)
https://onedigi.atlassian.net/browse/DEL-7576
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
install_abort is a temp variable so 'test -n' doesn't work on it.
This was fixed in all scripts except the USB script of ccimx6sbc.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
- Check the existence of files before the 10 second wait.
- Print the list of filenames to program to each partition.
- Print the file that's being updated to each partition.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
With the generalization done in previous commits, we have now several files
that are identical and can be merged into a common SOM or SOM family
folder.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Create global variables:
DEFAULT_IMAGE_NAME
GRAPHICAL_IMAGES
to have them substituted on the U-Boot install scripts for better
generalization.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
U-Boot install scripts (from uSD and USB) were hard-coded to dey-image-qt.
Allow to install other image files by setting a new variable 'image-name'
which defaults to 'dey-image-qt' if not defined, except for the CC6UL
SBC Express, that defaults to 'core-image-base'.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7385https://jira.digi.com/browse/DEL-7333
On these boot scripts, this variable is not used, so we can remove it.
Besides, it's generated by U-Boot code.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Use ##MACHINE## placeholder to have it later substituted by the recipe
using Yocto ${MACHINE} variable.
This will help later reducing the number of files to have one per SOM
(or even family) instead of one per platform.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Otherwise, the name of the file will be "u-boot-dey-initial-env", causing
errors when reading the default environment from userspace, since libubootenv
expects "u-boot-initial-env" instead.
https://onedigi.atlassian.net/browse/DEL-7566
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit adds the sdma-firmware.service to the rootfs
to load the SDMA firmware during boot, that is necessary
for some drivers to work correctly.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Non-graphical images (core-image-base, dey-image-aws) don't contain the
graphic-backend on their filenames.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
- Determine first the filenames and abort if any does not exist.
- Print a warning message about the erasing of the media with a list
of partitions and files to use for the update
- Sync the different scripts so they look more similar
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7333
Similar to how it's done on the ccimx6ul, create a function for updating
a partition with a file, that also prints a message.
Rename the function to be the same in all scripts.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7333
Previously, this script only allowed the U-Boot filename as parameter.
This commit makes use of getopts() to pass the following options to the
script:
-h, for help
-i, to pass the dey image name that prefixes the firmware filenames
-n, to skip the 10 seconds delay that allow you to cancel the process
-u, to pass the U-Boot filename
The default image name (if none passed) keeps being 'dey-image-qt' but the
new option allows reusing this script to install dey-image-webkit or
dey-image-aws images.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7385
The prebuilt 'athtestcmd' binary allows you to test tx/rx of the
Wi-Fi MAC, when the driver is loaded in test mode.
This is required for certifying Wi-Fi in products, so add it by
default for the ccimx6sbc.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7444
(cherry picked from commit acb402fdcfa54d8d5519580ff7fcfb76fbed3f49)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit backports a patch to fix the following build issue with
the GCC v10:
dtc-parser.tab.c:1069: multiple definition of `yylloc'
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Since this feature was introduced in newer versions of U-Boot, we need
to disable it for v2017.03 to avoid several compilation issues.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This version is only required to build U-Boot 2017.X, so since CC6UL was moved
to a new U-Boot version it is not necessary and also fixes a build issue.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update US Board Data File to use the new GOLDEN2 calibration.
The new BDF is:
- bdwlan30_US.bin (328f970444b5eaaa48c0188cea1685e3)
https://jira.digi.com/browse/CC6UL-1210
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit 373b3958bad9d0c462349d89ef5832e843624b01)
This commit fixes the following warning:
WARNING: meta-digi/meta-digi-arm/recipes-bsp/trustfence-cst/trustfence-cst_3.3.1.bb:
Recipe trustfence-cst sets S variable with trailing slash '/tmp/work/aarch64-dey-linux/trustfence-cst/3.3.1-r0/cst-3.3.1/',
remove it
https://jira.digi.com/browse/DEL-7508
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This default environment is needed by packages like libubootenv.
https://jira.digi.com/browse/DEL-7508
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This package has been entirely replaced with libubootenv
https://jira.digi.com/browse/DEL-7410
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is a replacement for u-boot-fw-utils. Adapt the u-boot-fw-utils patches
to this new library and include the same logic as the u-boot-fw-utils recipe
(generate and install the U-Boot environment configuration file in the rootfs)
For now, remove the u-boot-default-env dependency, since the package doesn't
exist in zeus.
https://jira.digi.com/browse/DEL-7410
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Commit 4ab569fb("recipes-*: refine restrictions for NXP BSP") from
meta-freescale layer restrict the use of certain recipes and classes to
enforces them to use a NXP BSP. This is done by adding a new MACHINEOVERRIDES
called "use-nxp-bsp"
https://jira.digi.com/browse/DEL-7508
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Commit ffeb0556("classes: fsl-kernel-localversion: Fix task dependency") in
meta-freescale layer fixes a task dependency issue, so do_preconfigure() was
renamed to do_kernel_localversion().
https://jira.digi.com/browse/DEL-7508
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The new SCFW re-enables "Read DBI deskew configuration"
setting, to support Nanya LPDDR4 chips.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/CC8X-297
Add a patch series to customize the ATF console for the ConnectCore 8M platforms,
and to disable the Cortex-M debug UART.
https://jira.digi.com/browse/DEL-7497
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update file:
- bdwlan30_US.bin (93a58f0f8e241bef6600d53d013c3cb2)
This file was generated by calibrating several v3 CC8MN SOMs and
merging their resulting BDF files into a new Golden file.
Target output powers tables and CTL tables remain intact.
Reference calibration file is obtained from 'qca6574au-le-2-2-2_qca_oem' repo
at tag 'r00005.1' under path
'wlanfw/cnss_proc/wlan/fw/target/sdio_dst/qc6174/bdwlan30.bin':
- bdwlan30.bin (8a40d95698825e1718bee640b1f7982a)
Target output powers respect the maximum EVM for every data rate.
CTL limits comply with FCC, CE and TELEC certifications.
https://jira.digi.com/browse/DEL-7487
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit cceffef831edd10b017aac3006636c98f7baa0a9)
Update file:
- bdwlan30_US.bin (93a58f0f8e241bef6600d53d013c3cb2)
This file was generated by calibrating several v3 CC8MN SOMs and
merging their resulting BDF files into a new Golden file.
Target output powers tables and CTL tables remain intact.
Reference calibration file is obtained from 'qca6574au-le-2-2-2_qca_oem' repo
at tag 'r00005.1' under path
'wlanfw/cnss_proc/wlan/fw/target/sdio_dst/qc6174/bdwlan30.bin':
- bdwlan30.bin (8a40d95698825e1718bee640b1f7982a)
Target output powers respect the maximum EVM for every data rate.
CTL limits comply with FCC, CE and TELEC certifications.
https://jira.digi.com/browse/DEL-7487
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit cceffef831edd10b017aac3006636c98f7baa0a9)
There's a Yocto configuration option that enables this feature in U-Boot, but
since imx-boot images are signed using the scripts in trustfence-sign-tools,
said configuration is lost and the scripts don't take it into account if it's
enabled. Make sure that the configuation carries over to the script.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Attempting to boot encrypted artifacts on these platforms will result in HAB
events caused by CAAM errors. This is due to the CAAM being configured for
non-secure contexts (in regards to Trustzone) while the HAB expects it to be
configured for secure contexts.
For now, only sign artifacts for these platforms even if the project has the
encryption feature enabled.
https://jira.digi.com/browse/DUB-993
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Allow users to select Certified Bluetooth 4.1, rather than
the default not-certified Bluetooth 5, through the use of variable
BT_FW_VERSION="4"
md5sums:
nvm_tlv_3.2.bin ==> 9621f50172f2bfb4f65f8e5c6528b614
rampatch_tlv_3.2.tlv ==> 769e1fc9e5a2061bb3aaa1f32dac3804
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
This overlay added cooling devices for all quad cores.
On the latest BSP, the SoC device tree include contains all four
cooling devices and the newest U-Boot is able to delete the nodes
for non-existing cores, so there's no need for this overlay
anymore.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Otherwise, mkimage will delete the device trees between imx-boot builds,
causing the build to fail when generating a signed imx-boot.
https://jira.digi.com/browse/DEL-7420
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
ConnectCore 8M Mini has support to VPU but the library used is different than
the used by the i.MX6 processors. This recipe manages the required libraries
to operate with this kind of VPU.
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Required for the release rel_imx_5.4.70_2.3.0 based on zeus
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update the MACHINE values with the ones in meta-freescale and meta-imx layer.
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The Cortex-M4 uses the UART4 as debug console, and it is
shared with the Cortex-A53. This commit disables it for the
ConnectCore 8M Mini DVK board to avoid conflicts.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Both ConnectCore 8M platforms share the same U-Boot build process,
so apply the same changes for them.
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Use the same common files for both ConnectCore 8M platforms
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Use the same common files for both ConnectCore 8M platforms
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Use the same common files for both ConnectCore 8M platforms
https://jira.digi.com/browse/DEL-7397
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
When manually changing the partition table, it could happen that
a UBI volume already exists in the 'update' partition.
If not erased, the system may find the old UBI volume (with wrong
geometry information) and try to mount it which will result in
failure.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
On commit 1e5cafeb79 a fall-back
update command was introduced in case the newest command fails.
If the newest command succeeds, however, the 'test' command for
error doesn't match (there is no error) and the return code of
such test is "1". On the next check for errors, this results on
an error, when we really mean to continue because the first
command was successful.
Move the second error check inside the error path of the first
attempt.
Reported-by: Francisco Gil <francisco.gilmartinez@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
In order to revoke SRKs in platforms with AHAB we need to set a mask
during the signing/encryption process.
Create new TRUSTFENCE_SRK_REVOKE_MASK variable to export the
SRK_REVOKE_MASK variable required by the imx-boot signing script.
The revoke mask is not necessary for signing/encryption of other artifacts,
so set it by default to 0x0.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Add support to sign and encrypt OS artifacts for AHAB devices.
https://jira.digi.com/browse/DEL-7371
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The 'source file system' was removed as an argument from the
'update' command in U-Boot v2020.04.
For platforms using such version, remove it from the update fw
scripts.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-983
This command isn't essential and might not be available on all systems, so
remove it. Use the "oflag=sync" dd parameter instead.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Gabriel Valcazar
Ariel D'Alessandro
Gonzalo Ruiz
Arturo Buzarra
Francisco Gil
Mike Engel
Hector Palacios
Javier Viguera
Hector Bujanda