Generalize DCD patch to be agnostic of the platform and modify the imx-boot
recipe to depend only on the memory configuration instead of the platform name.
https://jira.digi.com/browse/DEL-6205
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The PWM and ADC values are still to be determined, since their BSP support is
currently unavailable.
https://jira.digi.com/browse/DEL-6205
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Initialize Bluetooth chip in HCI_H4 mode and provide a firmware binary
with the IBS and DEEP_SLEEP mode disabled by default. Also this firmware
enables an internal clock required to maintain the system on low power modes.
https://jira.digi.com/browse/DEL-3711
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The Digi vendor kernel uses a dedicated HCI UART driver with support for
In-Band Sleep (IBS). This driver, when used with a QCA vendor ROME plugin
for hciattach, is able to upload a new firmware version to the Bluetooth
chipset, as well as set the MAC address directly on the firmware.
Mainline BSP uses the HCI H4 driver instead and the "qualcomm" hciattach
plugin which is not able to upload firmware to the QCA6564 chipset.
As such, when using mainline the chipset uses the ROM firmware and the
bluetooth init script has been adapted accordingly.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This kernel module is used for debugging and when available it spams the
log file with every input event.
This patch avoid it being loaded by default but the user can still load
it manually if required.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The meta-freescale layer assumes that when you define the use-mainline-bsp
the platform is going to use the etnaviv gpu driver. This is not the case
for the CC6UL as the mxsfb.c driver is still not DRM capable.
Probably this will change in v4.19 as there is a DRM capable mxsfb.c
driver that will make it possible to use the armada xf86 driver with the
etnaviv fbdev emulation.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
* Check for file before using it
This just avoids the failure, on mainline access to OTP would need to be
done differently, see:
https://jira.digi.com/browse/ACL-163
* Use compatible node instead of digi,machine,name
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Just add the following to the conf/local.conf file:
MACHINEOVERRIDES .= ":use-mainline-bsp"
The defconfig is the mainline imx_v6_v7_defconfig.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Currently the contents of FILESEXTRAPATHS and the actual paths being used for
the patch files are not aligned. That generates the following WARNINGs:
imx-gst1.0-plugin_4.3.4.bb: Unable to get checksum for imx-gst1.0-plugin SRC_URI entry 0001-gstimxv4l2-map-dev-video1-to-dev-fb0.patch: file could not be found
kernel-module-imx-gpu-viv_5.0.11.p8.6.bb: Unable to get checksum for kernel-module-imx-gpu-viv SRC_URI entry 0001-mxc-gpu-use-recommended-values-for-minimum-GPU-frequ.patch: file could not be found
kernel-module-imx-gpu-viv_5.0.11.p8.6+fslc.bb: Unable to get checksum for kernel-module-imx-gpu-viv SRC_URI entry 0001-mxc-gpu-use-recommended-values-for-minimum-GPU-frequ.patch: file could not be found
Also, those patches are not being applied.
This patch fixes FILESEXTRAPATHS to contain the actual paths being used.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
(cherry picked from commit 4d35d15fee)
Currently the contents of FILESEXTRAPATHS and the actual paths being used for
the patch files are not aligned. That generates the following WARNINGs:
imx-gst1.0-plugin_4.3.4.bb: Unable to get checksum for imx-gst1.0-plugin SRC_URI entry 0001-gstimxv4l2-map-dev-video1-to-dev-fb0.patch: file could not be found
kernel-module-imx-gpu-viv_5.0.11.p8.6.bb: Unable to get checksum for kernel-module-imx-gpu-viv SRC_URI entry 0001-mxc-gpu-use-recommended-values-for-minimum-GPU-frequ.patch: file could not be found
kernel-module-imx-gpu-viv_5.0.11.p8.6+fslc.bb: Unable to get checksum for kernel-module-imx-gpu-viv SRC_URI entry 0001-mxc-gpu-use-recommended-values-for-minimum-GPU-frequ.patch: file could not be found
Also, those patches are not being applied.
This patch fixes FILESEXTRAPATHS to contain the actual paths being used.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This way, customers are less likely to flash the plain u-boot by accident
instead of imx-boot. Also, have the imx-boot recipe look for the u-boot files
in the imx-boot-tools directory.
https://jira.digi.com/browse/DEL-6185
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
On this platform, the SPI device gets registered as /dev/spidev32766.0.
https://jira.digi.com/browse/DEL-6183
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
During the merge of the maintainance branch and the manual revert of
some recipes, these were forgotten.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Digi Embedded Yocto 2.4-r2.4-beta
Manually changed recipes to use the master branches instead of the
fixed SHA1 from the last release.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
On this platform, the SPI device gets registered as /dev/spidev32766.0.
https://jira.digi.com/browse/DEL-6183
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We have seen errors when verifying the rootfs update on 2 GiB variants. Forcing
otf-update prevents these errors from happening.
https://jira.digi.com/browse/DUB-855
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also, make the script recognize the different SOM variants.
https://jira.digi.com/browse/DEL-6175
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The generate_installer_zip() function had a hardcoded "u-boot" filename when adding
the bootloader to the list of files that are put in the installer .zip.
https://jira.digi.com/browse/DEL-6174
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Set a lower baudrate of 115200bps for bluetooth on SOMv1 since
hardware flow control is not available.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Commit d981f999f0 introduced a new
platform with dashes on its name, which broke Jenkins build because
middle variables are being created using the name of the platform
and dashes are not allowed in bash variable names.
To fix it, this commit changes the dashes to underscores on the fly.
This is ported from a2092450fa.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
These packages create dependency issues when compiling framebuffer images, and
they aren't essential. Include them only in ccimx6 images.
This reverts commit 2edb127d28.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Since we were modifying UBOOT_SYMLINK for the ccimx8x, we were generating
u-boot symlinks with imx-boot names. This also caused the imx-boot recipe to
fail during compilation, because it couldn't find the old UBOOT_SYMLINK that
we replaced.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Arturo Buzarra
Alex Gonzalez
Jose Diaz de Grenu
Hector Palacios
Gabriel Valcazar
Gonzalo Ruiz