It's not enabled by default. It's controlled by DEY_IMAGE_INSTALLER
variable in the project's local.conf.
https://jira.digi.com/browse/DEL-3591
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add critical section in suspend script to avoid that more than
one instance can be executed concurrently. This happens, for
instance, when the power button key is pressed while the system
is resumming, causing issues on the wifi interface.
https://jira.digi.com/browse/DEL-3431
Signed-off-by: Pedro Perez de Heredia <pedro.perez@digi.com>
The profiles created for the sgtl5000 sound card didn't have any priorities
assigned, making pulseaudio map a different profile than before and causing the
sink to remain unloaded.
This commit fixes this by assigning a priority to each profile. The values
were taken directly from the default profile to assure that pulseaudio's
behavior is the same using one profile or the other.
https://jira.digi.com/browse/DEL-3602
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We have seen corner cases (e.g. when the partition to format has already
some corrupted UBI metadata) where ubiformat stops and ask the user for
confirmation to do the format. We cannot have such interactivity in the
recovery ramdisk so use the '-y' argument to assume yes for all
questions.
Also use the '-q' (quiet) parameter instead of the '/dev/null'
redirections to remove command's output.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit adds a wpa supplicant P2P configuration file and configures
the p2p0 interface automatically at pre-up.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
For the moment the cloudconnector is provided only as static library, so
the recipe can be simplified.
https://jira.digi.com/browse/DEL-3523
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
In pulseaudio, module-suspend-on-idle controls how much time a sink spends
in the 'idle' state before going to 'suspended'. This means the ALSA device
associated with the sink stays busy for a few seconds after loading or using
the sink.
This commit adds the timeout=0 parameter when loading module-suspend-on-idle.
Now the sink will go to the 'suspended' state right after being loaded or used.
https://jira.digi.com/browse/DEL-2218
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
On boot, pulseaudio looks for the sound cards' corresponding profile sets, and
uses a default configuration if none is found. This was causing pulseaudio to
take up to 5 seconds trying every possible default profile.
This commit fixes this by creating a specific profile set for each of the sound
cards on the ccimx6sbc so pulseaudio doesn't spend time trying different
profiles that don't apply to our platform. It also adds udev rules so
pulseaudio knows which configuration to load for each card.
https://jira.digi.com/browse/DEL-2218
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The HDMI hotplug script required alsa-utils to be installed in order to work.
This commit avoids this by adding a recipe for a small binary that replaces
aplay in the script.
https://jira.digi.com/browse/DEL-3482
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Instead of using a hardcoded path to the SWU update package, just get
the filename and search the file in the different mounted partitions
(giving priority to the internal 'update' partition over other external
media).
https://jira.digi.com/browse/DEL-3466
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
For block devices we can get the filesystem in the partition using the
'blkid' command.
This cleans up some warnings on mounting:
EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (mmcblk0p4): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (mmcblk0p4): couldn't mount as ext2 due to feature incompatibilities
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
"i" variable in the nested loop is expanded to the absolute path
of the device, so prepending it with the ${device} results in
"/dev/sda/dev/sda1" for a 'sda1' partition.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These examples can be used to test Device Cloud functionality. There are three
test applications available:
* device_request_listener: Listen for requests from the Device Cloud
* upload_data_points: Upload test data points to the Device Cloud
* upload_file: Uploads the contents of a file as binary data points
https://jira.digi.com/browse/DEL-3305https://jira.digi.com/browse/DEL-3309https://jira.digi.com/browse/DEL-3397
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
This avoids the certificate package being generated according to Debian
rules (libcloudconnector-cert).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The CC6UL has little video capabilities and reduced storage memory so lets
remove gstreamer plugins included in -bad and -ugly to reduce the rootfs
size.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-713
recovery-utils allows to configure recovery commands and reboot into
recovery mode.
Internal recovery-utils.git SHA1: 5555d4c736e3
https://jira.digi.com/browse/DEL-3358
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
When hotplugging the HDMI cable after booting the target, pulseaudio doesn't
load the HDMI sink. This commit fixes this by adding a udev rule and a script
that prompts pulseaudio to detect the HDMI sound card and load its sink, as
well as making it the default one.
If alsa-utils is available, a faulty command is run to load the card without
any audio output. Otherwise, module-udev-detect is unloaded and reloaded.
This is based on commit fca507d316.
https://jira.digi.com/browse/DEL-2327
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is a clone from the original psplash recipe init script
but with the added fix:
@@ -25,5 +25,7 @@
read rotation < /etc/rotation
fi
-/usr/bin/psplash --angle $rotation &
+if [ -c "${FBDEV:-/dev/fb0}" ]; then
+ /usr/bin/psplash --angle $rotation &
+fi
which avoids running the application when there is no framebuffer
in the system. This prevents the following error message during
boot:
Error opening /dev/fb0: No such file or directory
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2747
Some platforms, like ccimx6ulsbc, don't support jack detection
out of the box.
PulseAudio will mute the Headphones by default if it believes
there is no headphones jack plugged-in. With this patch we
tell it to preserve ALSA default value for the headphones
controls.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3435
These recipes allow to generate the .swu update packages to be used with
SWUpdate. The packages can be generated using:
bitbake dey-image-qt-swu
bitbake core-image-base-swu
https://jira.digi.com/browse/DEL-3272
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
- Include psplash package in the recovery initramfs recipe.
- Start psplash in the recovery init.
- Add new methods to communicate with psplash from the init script.
- Show psplash progress information from the init script.
- Start progress binary to update psplash during a firmware update.
https://jira.digi.com/browse/DEL-3356
Signed-off-by: David Escalona <david.escalona@digi.com>
- This patch comes from the sw-update upstream and adds command line support
to the progress client binary.
a11e6f2b80https://jira.digi.com/browse/DEL-3356
Signed-off-by: David Escalona <david.escalona@digi.com>
- Added a 5 seconds delay before mounting external disks so they have
time to be recognized in the system.
- Check if UBI volume is mounted before formatting it.
- Check if eMMC block device exists before formatting it.
Signed-off-by: David Escalona <david.escalona@digi.com>
- Added the new image type 'recovery.vfat' to the DEY images
generation process. This new image is a clone of the 'boot.vfat'
but including the recovery ramdisk and the recovery boot script.
- Added the new image type 'recovery.ubifs' to the DEY images
generation process. This new image is similar to the 'boot.ubifs'
but including the recovery ramdisk and the recovery boot script.
Signed-off-by: David Escalona <david.escalona@digi.com>
- This recipe generates the recovery ramdisk image with the contents of the
recovery ramdisk tree (recovery-initramfs) and other packages.
Signed-off-by: David Escalona <david.escalona@digi.com>
Bringing the Bluetooth interface down and up during suspend
is not needed and it even showed problems on the Starter Board
where the Bluetooth interface does not come up again after
having been brought down in suspend.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3416https://jira.digi.com/browse/DEL-3081
Separately add 'dey-gstreamer' to ccimx6ulsbc platform.
This platform does not have 'accel-video' but we want gstreamer
for using it with video/camera.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2358
There is new functionality in that version that we need for our firmware
update solution, so append the git-based recipe and set the revision to
the 2016.10 version.
Also provide a customized build configuration file. Notice that the
defconfig file is actually a full '.config'. It needs to be a full
config file because otherwise the anonymous python function in the
recipe is not able to gather all the build time dependences.
https://jira.digi.com/browse/DEL-3355
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove preventive delays during the removal of Bluetooth and Wireless
interfaces. Tests revealed they are not needed.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The loading of the wireless module without proper arguments does nothing.
Besides, if the interface was down before going to suspend, there is no
need for the wireless module to be loaded.
The wireless module will be loaded nevertheless (with proper arguments)
when the interface is brought up.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3241
The suspend script was unloading the wireless module driver *only* if the
interface 'wlan0' was previously up. If the interface is down the module
does not unload and the system fails to suspend.
This patch removes the module always if it appears in the list of loaded
modules.
While on it, move the unloading of wireless after the unloading of
Bluetooth, to be in line with the reversed order in which they are loaded
on the resume_interfaces() call.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3241
Use the static binary from the tarball, which should be common across
different platforms and operating systems.
https://jira.digi.com/browse/DEL-3261
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The u-boot header is required for U-Boot to boot the image in secure boot.
The cpio.gz.u-boot.tf image gets signed and encrpyted if required.
https://jira.digi.com/browse/DEL-3242
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
https://jira.digi.com/browse/DEL-3195
Signed-off-by: Pedro Perez de Heredia <pedro.perez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The OTP word read was incorrect. HW_OCOTP_CFG5 corresponds to bank 0 word 6.
https://jira.digi.com/browse/ADK4A-1129
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Print the wireless configuration as well as supplicant and hostapd version info
https://jira.digi.com/browse/DEL-3147
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This allows to correctly read the U-Boot version when using encrypted images.
Leave the current implementation as a fallback, in case the system is using an
old U-Boot which does not populate the device tree property.
https://jira.digi.com/browse/DEL-3025
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
When encryption is enabled, the signed U-Boot image will be used for the uSD.
This allows the uSD image to boot the device and recover it from the U-Boot
console, which is its main purpose. Nevertheless, the uSD image will not be
able to boot Linux.
https://jira.digi.com/browse/DEL-2877
This reverts commit 2e13e194d9.
Optimize the provided config file with default support for 802.11ac.
https://jira.digi.com/browse/DEL-3128
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Also change the image type of dey-image-trustfence-initramfs.
https://jira.digi.com/browse/DUB-615
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
x11vnc is light in size so we can include it in the final rootfs after
reworking the qtbase and packaga-management stuff.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Including ICU increases the rootfs too much and is not needed unless we want
to build qtwebkit, so only include it for platforms with enough size.
Additionally, linuxfb support is not needed for ccimx6.
https://jira.digi.com/browse/DEL-3058
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The ccimx6ul has a small NAND flash rootfs partition, and removing
package-management image feature saves around 10MB.
https://jira.digi.com/browse/DEL-3058
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Do not use hcitattach to reconfigure the baudrate but set it directly in the
Bluetooth FW file; this work arounds some synchronization problems when not
using HW flow control.
https://jira.digi.com/browse/DEL-3052https://jira.digi.com/browse/DEL-3057
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
CCIMX6UL's rootfs partition is not big enough for the default
'dey-image-qt' image. This commit reworks the QT5 and SATO installed
packages for the ccimx6ul, so the image fits in the rootfs partition.
https://jira.digi.com/browse/DEL-2607
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The ccimx6ul does not have a GPU, so opengl based gstreamer sink will
not work. Thus apply the patch only for the CCIMX6.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This plugin uses directly the framebuffer, so it can be used in non
X11-based systems, but it oly supports software rendered content,
no opengl/es.
https://jira.digi.com/browse/DEL-2607
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This allows to build 'qtbase' for the CC6UL.
It only fixes the broken build, as any QT application that uses OpenGL/ES
will fail because there is no support for QT/OpenGL in modules without
a GPU.
Fix:
arm-dey-linux-gnueabi-g++ -march=armv7-a -mfloat-abi=softfp -mfpu=neon
--sysroot=/ssd/dey/jethro/fb/ccimx6ulsbc/tmp/sysroots/ccimx6ulsbc
-Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -Wl,-O1 -o opengldesktop
opengldesktop.o -lGL
.../arm-dey-linux-gnueabi/5.2.0/ld: cannot find -lGL
A similar commit was done in meta-fsl-arm.git (branch Krogoth).
https://jira.digi.com/browse/DEL-2607
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add an empty calibration file to prevent the 'xinput_calibrator' tool
being launched on X11 desktop start.
The file does not have any calibration data because capacitive touch
displays usually do not need calibration.
https://jira.digi.com/browse/DEL-3046
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This file has not been synchronized with the one in Poky since previous
versions of DEY. Not much has changed, but sync it anyway.
Also:
* Get SHOWCURSOR from formfactor config files, but fallback to one
value depending on HAVE_TOUCHSCREEN if it was not configured.
* Rename the bbappend to the version generic '_%.bbappend'
https://jira.digi.com/browse/DEL-3046
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The name "ext-eth" seems to indicate "External Ethernet". Rename that variable
and related ones to a more proper name like second ethernet.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Copy of the original defconfig in hostapd-2.4 and enabling next options:
- CONFIG_LIBNL32
- CONFIG_EAP_PSK
- CONFIG_EAP_PWD
- CONFIG_WPS
- CONFIG_WPS_NFC
- CONFIG_RADIUS_SERVER
- CONFIG_IEEE80211N
- CONFIG_IEEE80211AC
- CONFIG_DEBUG_FILE
This means that the hostapd binary will have support for that features, but it
does not imply that the wireless chip does support it.
https://jira.digi.com/browse/DEL-2936
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This reverts commit b8f50680e5.
The support to read and write to an encrypted environment has been added, so
there is no need to exclude the u-boot-fw-utils anymore.
https://jira.digi.com/browse/DEL-2836
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Add commented lines as example to configure and run the wlan0 interface in AP
mode using hostapd daemon.
https://jira.digi.com/browse/DEL-2913
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Do not autostart hostapd daemon on boot because because it will conflict with
wpa-supplicant process and add a custom hostapd.conf file with WPA2-AES
encryption.
https://jira.digi.com/browse/DEL-2913
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Currently we don't support booting encrypted images from an SDCARD, so
just disable the generation of such images.
https://jira.digi.com/browse/DEL-2876
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
enabled
There is currently no support on fw_printenv/fw_setenv to access an
encrypted environment.
This commit removes the package if U-Boot environment encryption is
enabled to avoid environment corruption on access.
It also documents the issue as a known issue.
https://jira.digi.com/browse/DEL-2625
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
According to 'grep' manual '\s' is a synonym for [[:space:]] which
matches spaces, TABs, but also newlines, etc. We want to only match
spaces and TABs, so use [[:blank:]] instead.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* set cellular user and password
* stricter replace to not match set values
* only set cellular interface to auto
Internal merge of Github's PR:
https://github.com/digi-embedded/meta-digi/pull/2
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
By default, on closed devices you cannot revoke any key. To do so, it is
required to compile a U-Boot which instructs the HAB not to set the sticky
bit which write protects that field in the OCOTP controller.
This patch introduces a Yocto macro which allows to configure U-Boot in
that way.
In the ConnectCore 6, the value of this settings is ignored, because HAB never
sets the sticky bit which write protects that field.
https://jira.digi.com/browse/DUB-665
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
While performing usability testing on the TrustFence documentation, it has
been noted that in order to follow the secure boot instructions the
console needs to be enabled.
We have now moved the secure console section to the end of the
documentation so that disabling the console is the last configuration to
make in a secure system.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Down the bluetooth interface before entering suspend and up it after resuming
if it is present and up.
https://jira.digi.com/browse/DEL-2806
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Start syslog earlier (from 20 to 02) so it is running and other init scripts
can use it to log into the system like the S03networking script.
https://jira.digi.com/browse/DEL-2812
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This is needed so the encrypted rootfs is properly resized to the
partition size.
https://jira.digi.com/browse/DEL-2765
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
New functionality has been implemented in trustfence-tool application,
so there is no need to call cryptsetup command.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Get filesystem type of rootfs block device and pass it explicitly to the
mount command to clean following warnings on boot:
EXT4-fs (dm-0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (dm-0): couldn't mount as ext2 due to feature incompatibilities
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We need a different configuration file, because the SoftAP functionality is
supported using the hostapd package instead of the wpa_supplicant.
https://jira.digi.com/browse/DEL-2744
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Extend the report with more details about:
- memory usage
- all network ports (-a) with their related PIDs (-p)
- network link details (to determine if interface is up)
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Using module-detect there are some audio reverb problems. Reverting that commit
will make pulseaudio use module-udev-detect again instead, which takes longer
to initialize but does not have that problem.
This reverts commit e021f738ee.
https://jira.digi.com/browse/DEL-2587
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
When module-alsa-sink is used, the audio is sometimes heard with
reverb. We will go back to module-udev-detect, so the functionality
introduced in the commit being reverted won't longer work.
This reverts commit fca507d316.
https://jira.digi.com/browse/DEL-2587
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
Add a couple of bluez patches: one for increasing the number of connection
showed with "hcitool con" command and remove "refresh" option in hcitool
help that is not supported.
The qca6564 chip can support more than 10 simultaneous BLE connections.
https://jira.digi.com/browse/DEL-2735
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
qtwebengine does not support armv5 platforms (for example ccardimx28js),
so we need to restrict that package to the ccimx6sbc
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
When Trustfence is enabled, this adds a dependence on the TF initramfs,
so it's built and added to the boot image.
It also modifies the u-boot boot script on the fly, to boot correctly
using the Trustfence initramfs.
https://jira.digi.com/browse/DEL-2278
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This recipe builds the initramfs image that is used to boot from an
encrypted rootfs.
https://jira.digi.com/browse/DEL-2278
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This package adds some files needed by the trustfence initramfs and that
are not included in other packages.
https://jira.digi.com/browse/DEL-2278
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
lvm2 package provides some user-space tools, but also some dynamic
libraries: libdevmapper, libdevmapper-event, etc.
This commit allows to package the LVM2 libraries in a different package
than the LVM2 user-space tools. This way other user-space tools (e.g.
cryptsetup) that runtime depends on the LVM2 libs can only add that libs
package to the rootfs, instead of the whole LVM2 utilities.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The ccimx6ul or ccardimx28 do not have hdmi interface, so do not install the
hdmi hotplug script.
https://jira.digi.com/browse/DEL-2654
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The TRUSTFENCE_UBOOT_DEK_SIZE Yocto macro maps to the UBOOT_DEK_SIZE U-Boot
Kconfig entry, which is defined as a choice entry. This makes necessary
to explicitly define the choice Kconfig entry for the configuration to
work.
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
There are several possible values for TRUSTFENCE_UBOOT_ENV_DEK:
* Not defined: if the trustfence support is not included.
Should not include the feature.
* 32 characters: when defining a valid key.
Should include the feature.
* "0": when explicitly disabling the feature.
Should not include the feature
* <other>: Invalid value, should trigger the error.
This commits fixes the logic so that 'None' (no defined) is taken as a valid
value.
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
The following utilities are supposed to be available on the environment's
PATH:
uptime, uname, cat, zcat, free, ps, mount, netstat, route, ifconfig, gzip
https://jira.digi.com/browse/DEL-2447
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This commit changes the CONFIG_CCIMX6SBC_CONSOLE_ENABLE_GPIO_NR define
into a platform independent setting.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-2641
The power regulator connected to the qca6554 chip is always on, which causes
the Bluetooth part to not work correctly after a software-reset.
This commit asserts momentarily the BT_EN line during the start-up sequence
to reset the Bluetooth controller so that it is in a predictable state after a
reset.
https://jira.digi.com/browse/DEL-2623
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This function is deprecated in favor of bb.utils.contains. The same
change has been done in other layers.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
https://jira.digi.com/browse/DEL-2603
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
The steps to set the bluetooth MAC address is send an specific hci command
and an hci reset, so the bluetooth interface need to be up in order to
configure it.
Additionally we have generalized the way to read the MAC address from the
device tree and removed some old code for getting the MAC address in
kernel version 2.
https://jira.digi.com/browse/DUB-595
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Add a software workaround to disable the HW flow control because the SOM
revision 3 (and older) has swapped the bluetooth TX and RX lines so we need
to operate in DTE mode which implies that the HW control lines are swapped.
This also implies reducing the baudrate to avoid the need for HW flow control.
https://jira.digi.com/browse/DEL-2611
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Implement the set of TRUSTFENCE_ macros to configure each secure boot feature
available in U-Boot.
https://jira.digi.com/browse/DUB-570
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
sysinfo is a bash script which gathers all the relevant information
from a running system on a timestamped compressed file.
https://jira.digi.com/browse/DEL-2447
Signed-off-by: Victor Rubio Victor.RubioTorroba@digi.com
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit adds a trustfence class to encapsulate all trustfence
configurations.
https://jira.digi.com/browse/DEL-2257
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This support comes from meta-linaro @9f899282caa9 and adds the ability
to configure getty dynamically from the console argument in the kernel
command line.
This will make it possible to enable/disable the console dynamically as
signalled by U-Boot.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
David Escalona
Javier Viguera
Pedro Perez de Heredia
Gabriel Valcazar
Alex Gonzalez
Hector Palacios
Diaz de Grenu, Jose
Isaac Hermida
Stephan Klatt
Mike Engel
Jose Diaz de Grenu de Pedro
Victor Rubio