This commit modifies the boot script condition to apply the overlay for MCA
based on HWID MCA field.
https://onedigi.atlassian.net/browse/DEL-8521
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit modifies the boot script condition to apply the overlay for DVK v1
on boards without the board_version variable defined.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds an overlay for DVK v1 and modifies the boot script to apply it
based on the board_version variable.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Partitions 'fip-a' and 'fip-b' are redundant at the moment. They are
not currently part of the dualboot system. In consequence, program
both partitons unconditionally during the install process.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Number of bootup logos is now configured using fbcon=logo-count parameter,
so use it instead of our deprecated custom code in the kernel.
For backwards compatibility, we add this parameter in the u-boot boot
script for all platforms but the ccimx93, where this is directly handled
by u-boot (v2022.04).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This reverts commit 2bdfdc92e1.
This suffix was removed on error. The artifact does have the suffix.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
These are just a verbatim copy of the ccimx8mm ones, so the project is
buildable. This file list should be revisited and adapted for the
ccimx93.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Increase the timeout from 90 to 120s since it's a large image
and it may take more time on different NANDs.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The U-Boot environment resides on a UBI volume. The uuu script
relies on the environment to save part of the commands that
U-Boot needs to execute after reboot in the middle of the
installation. If the UBI volume 'uboot_config' does not exist
the installer fails.
This commit:
- Creates a function -on the uuu script only- for obtaining
the result of running any U-Boot command (0=success, 1=error).
- Checks the existance of 'uboot_config' volume.
- Runs 'ubivolscript' script to create the UBI volumes layout
that generates the environment volume if it doesn't exist.
- Increases the timeout for running the 'ubivolscript' since
there are occasions in which 'ubi part' (which is part of the
script) takes more time (if it cannot find the fastmap).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
By default ccmp1 platforms have dualboot mode by default, however the required
boot script was added to ccmp15 platform only, so this commit fixes it.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The first time the 'dualboot' variable is tested it is directly run in
the script and doesn't need to escape the special characters.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
When Dual Boot is not enabled, 'rootfsvol' variable must point to the
single boot system rootfs partition 'rootfs'.
Explicitly set this value. Otherwise the script relays on the default
rootfsvol value, which may be a Dual Boot partition.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
- create dualboot.bbclass that
- sets DUALBOOT_ENABLED variable
- defines partition names and function for changing the sw-description
for swupdate
- move files from layer into meta-digi
https://onedigi.atlassian.net/browse/DEL-7962
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
On the CCMP1 SOMs, we only consider a single system partition called UBI,
with many UBI volumes.
The variable 'singlemtdsys' allowed to change between this and
a system with multiple MTD partitions with one UBI volume each
(old approach on CC6UL).
This commit removes the variable and uses the logic as if it was set.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
For the CC6UL 1GB flash variant, the programming of the rootfs exceeds
the current 90 secs timeout, giving following failure:
[Bulk(R):LIBUSB_ERROR_TIMEOUT] fb[-t 90000]: ucmd update rootfs ram ${fastboot_buffer} ${fastboot_bytes} -e
Error: Bulk(R):LIBUSB_ERROR_TIMEOUT
Increase the timeout to prevent the failure.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 16eded4f0edcc603de83be7155f7c09718ba5ddd)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit adds u-boot build support for the CCMP15 platform.
The installation scripts are copies from the CC6UL platform.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://onedigi.atlassian.net/browse/DEL-7797
U-Boot uses partition names instead of partition indexes for the nand devices.
This commit syncs the boot scripts with the new dualboot variables.
https://onedigi.atlassian.net/browse/CC6UL-1254
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add missing call to 'uuu' and erase the partition before creating
the UBI volumes.
Also add larger timeouts to erase operations.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The variable 'dualboot' (and 'singlemtdsys' for CC6UL) was restored
after the bootcmd that runs the first time after programming U-Boot runs
fastboot again to resume the script.
This is ok for the CC6UL but not for the rest of platforms, that run the
partition script on the bootcmd, *before* running fastboot.
Restore the variables for all platforms in the bootcmd right after
resetting the environment.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
U-Boot has embedded support to handle bootcount tries.
When the limit of tries is reached, U-Boot runs the script
in `altbootcmd` rather than the usual `bootcmd`.
This other script resides on meta-digi-dualboot layer.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Ensure stdout redirection to the USB interface is removed in every case.
Otherwise, it would be left redirected when INSTALL_UBOOT_FILENAME is
manually set.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Install scripts may rework the partition table basing on the value of
env variables. Information of UBI volumes may remain on the NAND that
could later not correspond to the new partition table.
Make sure the MTD partitions are erased prior to updating:
- For Multi-MTD, append '-e' option to the update command.
- For Single-MTD, erase the system partition.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Check the status of 'dualboot' env variable.
If set to "yes", use the dualboot partition table in the script and
restore the variable (default is "no") after resetting the environment.
Also, for dualboot, there's no need to wipe the recovery partition or
boot into recovery mode.
For dualboot, this script programs both systems A and B with the same
images.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-7649
When DualBoot mechanism is enabled and an update is pending,
the boot script needs to change certain variables and save the
environment.
The regular boot script already changes a number of variables,
such as 'extra_bootargs' and 'overlays' by appending strings to
the already existing values. Saving the envionment may make these
grow endlessly with each iteration of the boot script.
For this reason, move the DualBoot check as the first thing in
the script, save the environment if needed, and then continue
with the normal flow, that changes variables before booting
but doesn't save them.
On certain scripts, this allows us to get rid of some instructions
for resetting the overlays variable.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The script required the passing of option '-b' for setting up the
target to use a single MTD partition and multiple UBI volumes.
If a target however already has the variable 'ubisysvols' set to
'yes' but this parameter is forgotten when calling the script, the
partition layout would change to default (several MTD partitions).
Remove the recently added '-b' option and make the script decide
basing on the current value of 'ubisysvols' variable.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The script preserves the current value of env variable 'ubisysvols'
so that the new partition script generates the appropriate partition
table before proceeding with the update operations.
If using a UBI volumes layout, the script will not erase the partitions.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-7614
With U-Boot supporting the creation of mtdparts and UBI volumes depending
on the value of variable 'ubisysvols', adapt the install script to make
use of those to generate a partition table and UBI volumes accordingly.
This can be triggered with new option '-b'.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Set the new variable 'rootfsvol' to rootfs_a or rootfs_b when dualboot is
enabled, to cover the case where the devices uses the 'system' partition
with different UBI volumes.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Arturo Buzarra
Tatiana Leon
Gonzalo Ruiz
Javier Viguera
Hector Palacios
Mike Engel
Francisco Gil
Isaac Hermida