This commit replaces the hardcoded text from the readme file by the environment
variables adding from this way the release version to the file content.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Build the U-Boot for variants with 1GB of memory and make the installation and
boot scripts recognize all of the current variants.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, qt5 applications will fail to launch on the 8X and 6/6QP.
https://jira.digi.com/browse/DEL-7281
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The indexes of the MCA PWM controllers are different in Linux v5.4, so the
default value used by libdigiapix results in an error. Reflect this change and,
while at it, replace the default PWM with an IO connected to a user LED to make
the example more visual.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Commit c24d1d96 ("sysinfo: adapt script after removal of deprecated fsl_otp
driver") introduced a mistake masking the SEC_CONFIG[1] bit read from the OTP.
This commit fix the read command to force it in hex format and finally match
with the mask in the script.
https://jira.digi.com/browse/DEL-7263
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Since this overlay is only used in the SBC Pro bootscript, have a separate
bootscript for the SBC Express.
https://jira.digi.com/browse/DEL-7276
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update file:
- bdwlan30_US.bin (8c8b575fb9a65714df0b7c6cb3399ed6)
This file was generated by calibrating several CC8MN SOMs from spin 3
and merging their resulting BDF files into a Golden file.
It also encodes the Target output powers.
Reference calibration file is obtained from 'qca6574au-le-2-2-2_qca_oem' repo
at tag 'r00005.1' under path
'wlanfw/cnss_proc/wlan/fw/target/sdio_dst/qc6174/bdwlan30.bin':
- bdwlan30.bin (8a40d95698825e1718bee640b1f7982a)
Target output powers respect the maximum EVM for every data rate.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Add the ccimx6/6qp and update the ccimx8x supported U-Boot version. Even though
older versions of U-Boot can be built for the 8X, the dependencies with the
SCFW only make it possible to use the latest version of U-Boot to avoid
unexpected behaviour.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Back when the ccimx6/6qp used Linux v4.9, we needed to use crda because
wireless-regdb-static wasn't supported until v4.15. Now that we use v5.4 on all
platforms, this workaround isn't needed anymore.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Commit c24d1d96 ("sysinfo: adapt script after removal of deprecated fsl_otp
driver") introduced support to determine if a device is closed by checking
a new boolean property on the DT for the CC8X platforms, however the CC8M
platforms use the same mechanism. This commit modifies the sysinfo script to
check also the DT for the CC8M platforms.
https://jira.digi.com/browse/DEL-7263
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Commit cbb38440 ("meta-digi-dey: sysinfo: Add chip revision sysinfo output")
introduced a new script variable to determine the SOC revision of the module.
However this entry only is available on the CC8X platforms. This commit checks
if the entry exist and then tries to read it to avoid unexpected issues with
devices without this entry.
https://jira.digi.com/browse/DEL-7263
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This version includes changes needed to reflect the OTP driver update in the
kernel.
https://jira.digi.com/browse/DEL-7261
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit adds new environment variables to support QT with wayland and
to fix the following error message when executing QT5 applications on the
target.
qt.qpa.plugin: Could not find the Qt platform plugin "eglfs" in ""
This application failed to start because no Qt platform plugin could be initialized.
Reinstalling the application may fix this problem.
Available platform plugins are: minimal, offscreen, vnc, wayland-egl, wayland, xcb.
Aborted.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
The boot script appends values to certain variables such as
$extra_bootargs and $overlays.
If the final instruction of the boot script (dboot command)
fails, these variables contain the new values, plus the original
one. Since the user recovers the prompt, he may do a 'saveenv'
to save the environment, and the modified variables will be
saved, only to be enlarged again on the next boot.
This can lead to repeated strings on such variables.
Save the original value and restore it in case of failure on
the dboot command.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit updates the GPIO udev rules to change the group owner
and permission of the new gpio char driver. This will allow users
that belong to the digiapix group to access the char driver.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-7255
Follow the syntax:
_ov_<som|board>_<functionality>[_<hardware>].dts
where:
_ov_ identifies the file as an overlay.
som|board identifies whether the overlay applies to the SOM
or to the carrier board.
functionality identifies the function of the overlay.
hardware identifies the hardware to which the overlay
applies.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This package was being included as a RRECOMMENDS from libcrypto, but we don't
need it in the initramfs at all. Since our recovery image is already pretty big
compared with the recovery partition size on ccimx6ul platforms with 256 MB of
storage, remove it to make sure the image can fit.
https://jira.digi.com/browse/DEL-7253
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Add systemd auto-getty.service to run agetty on the console defined in the
kernel command line on platforms with systemd support.
This service replaces serial-getty@.service as the one responsible for
opening a tty port and prompting for a login name when
TRUSTFENCE_CONSOLE_DISABLE is configured.
https://jira.digi.com/browse/DEL-7242
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
We have specific scripts per platform to export the qt5 environment variables,
because using the default backend-specific scripts ported from the meta-imx
layer results in mismatches in specific cases (for example, 6UL framebuffer
images only support linuxfb, but the qt5-fb.sh script exports eglfs instead).
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Wrapping unterminated lines doesn't work for scripts (even
if they contain the backslash).
Substitute with full non-wrapped if/elif sentences.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7252
In the ccimx6sbc, since each SOC has a separate set of device trees, we can use
the soc_family environment variable when generating the name of the final
device tree in the bootscript. However, for the ccimx6qpsbc, there is only one
set of device trees with the "imx6qp" prefix, even though there are SOC
variants such as the imx6dp. Running the bootscript on a ccimx6qpsbc with an
imx6dp SOC assembled will result in a failure, since it will look for a
non-existing device tree starting with a "imx6dp" prefix.
Stop using the soc_family variable and hardcode "imx6qp" instead.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We originally ignored the weston-init.bbappend in meta-freescale back in thud
because we were basing our recipe off of NXP's sumo BSP, and NXP's weston-init
customizations were incompatible with the ones in meta-freescale. Remove it
from the BBMASK to be able to incorporate the customizations in meta-freescale.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
With the latest version of imx-mkimage, the original dtb file is being
removed at the end of the build.
Add a patch to preserve it and be able to run several builds during the
same compile run, like we do for imx-boot signing.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The ccimx6 uses the g2d weston renderer to avoid graphical glitches, but the
default renderer code doesn't handle suspend/resume cycles properly, causing
other issues (notably in the framerate and the desktop not showing 66% of the
time when resuming from suspend). Add a patch to mitigate these issues.
https://jira.digi.com/browse/DEL-7236
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Without this option, moving any element on the desktop (cursor or windows) will
cause an undesired "trailing" effect, where parts of the moved elements remain
on the desktop.
https://jira.digi.com/browse/DEL-7221
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
With this change, the ccimx6sbc and ccimx6qpsbc default images will now use the
xwayland backend instead of x11.
https://jira.digi.com/browse/DEL-7221
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
This workaround is no longer needed since ccimx6/6qp now use Linux v5.4
https://jira.digi.com/browse/DEL-7221
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Remove all v4.9 recipes and build Linux using the same branch on all platforms.
The .inc files were only needed because of the existence of multiple Linux
versions, but that's not the case anymore, so remove them.
https://jira.digi.com/browse/DEL-7221
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Hector Palacios
Arturo Buzarra
Gabriel Valcazar
Gonzalo Ruiz
Mike Engel
Francisco Gil Martinez