The nodes "/dev/ramX" and "/dev/loopX" are mounted on boot.
Each node calls the mount.sh script, but they are not mounted
because these nodes are blacklisted in the "blacklist.conf" file.
In the ccmp13 adding this modification in the rule saves
around 4 seconds per boot.
In the ccmp15 and ccimx6ul around 2 seconds are saved.
https://onedigi.atlassian.net/browse/DEL-8725
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
This commit adds signed FIT image support for the CCMP1
platforms when using Trustfence.
https://onedigi.atlassian.net/browse/DEL-8591
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Use the intention of installing dual boot firmware as a condition to set
bootlimit=3 so that the bootcount mechanism is enabled.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DUB-1058
During firmware install, the target may be reset several times.
We don't want the bootcount to count these as boot attempts.
This was done in a791bb4463 for the ccmp1
but not for the rest of platforms.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
These binaries are installed in subdirectories by default. The uuu
installer expects to find all binaries on the same folder where the script
is. By creating symlinks, the uuu installer can find all the binaries it
needs directly on the deploy folder.
NOTE: variables in 'for' clauses are intentionally without quotes to skip
whitespaces in them.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Improve boot attempts message showing not only the current boot attempt
but also the limit:
(boot attempt 1/3)
Print the message only when the bootcount mechanism is active, i.e. when
the bootlimit is defined (not zero), and when bootcount is > 0.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DUB-1056
New NXP's release is based on upstream v2.8. Use this only for ccimx93,
and keep using the previous Kirkstone release (based on upstream v2.6)
for the rest of the platforms.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Recently, meta-freescale backported the support to build multiple boot
artifacts. This clashes with the changes in our imx-boot bbappend,
so update the bbappend to make it compatible with the latest changes
in meta-freescale.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 2fd1dbfed7)
Through the inclusion of 'nand-4-256' in BOOTDEVICE_LABELS, the include
file 'st-machine-common-stm32mp.inc' adds strings to MULTIUBI_BUILD and
IMAGE_FSTYPES that result in building ubi and ubifs images.
These are redundant and not needed since meta-digi's
'image_types_digi.bbclass' already generates the needed ubifs images.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8714
The STM signtools are precompiled binaries with a fixed RPATH to look for
dynamic libraries.
When the binaries are installed to the regular ${bindir} (either native or
nativesdk), additional toolchain libraries in the regular ${libdir} folder
confuse the binaries, resulting in segmentation faults when running them
or missing symbols.
The package has been reworked to place the directory structure expected
by the binaries, in a subfolder "stm" within the ${bindir}.
Two wrapper scripts with the names of the binaries (STM32MP_KeyGen_CLI and
STM32MP_SigningTool_CLI) have been created to run the binaries in the new
subfolder.
Package version has been bumped to 1.1.
While on it, remove the 'do_install' from trustfence-stm-signtools.inc
which is not needed because the 'bin_package' class already provides the
same functionality.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8720
The appropriate way to add STM signtools to the SDK is via RDEPENDS on
nativesdk-packagegroup-sdk-host, not through the parent recipe of STM
signtools recipe itself.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8720
Some platforms do not support signing external artifacts (kernel, dtb,
etc.) yet, so we need to decouple the signing of the bootloader from the
signing of the external artifacts.
This commit generalizes the code, so instead of having platform exceptions
scattered along the recipes, we create a new variable used conditionally
to sign or not the external artifacts.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
ARM64 generic overrides where in the middle of the chain with more
precedence than IMX overrides.
From:
MACHINEOVERRIDES="imx-generic-bsp:imx-nxp-bsp:imxdrm:imxpxp:mx9-generic-bsp:mx9-nxp-bsp:mx93-generic-bsp:mx93-nxp-bsp:ccimx93:ccimx93:aarch64:armv8-2a:use-nxp-bsp:ccimx93-dvk"
To:
MACHINEOVERRIDES="aarch64:armv8-2a:use-nxp-bsp:imx-generic-bsp:imx-nxp-bsp:imxdrm:imxpxp:mx9-generic-bsp:mx9-nxp-bsp:mx93-generic-bsp:mx93-nxp-bsp:ccimx93:ccimx93:ccimx93-dvk"
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
mkimage output provides some information (basically image offsets) that
cst (code signing tool) uses to sign imx-boot images.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This version supports i.MX8ULP and i.MX9x devices.
NOTICE: changed the "srk_ca" parameter in ahab_pki_tree.sh from "yes" to
"no". This script is shared between cc8x and ccimx93. The imx93 does not
support that option at the moment (generation of subordinate SGK certs)
and for the cc8x we were generating them but never used them to sign
the artifacts.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Merge the patches for the PKI tree generation scripts, to ease
maintenance (still keeping two separate patches for HAB4/AHAB).
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
ARM64 generic overrides were in the middle of the chain with more
precedence than IMX overrides.
From:
MACHINEOVERRIDES="imx-generic-bsp:imx-nxp-bsp:imxdrm:imxpxp:mx9-generic-bsp:mx9-nxp-bsp:mx93-generic-bsp:mx93-nxp-bsp:ccimx93:ccimx93:aarch64:armv8-2a:use-nxp-bsp:ccimx93-dvk"
To:
MACHINEOVERRIDES="aarch64:armv8-2a:use-nxp-bsp:imx-generic-bsp:imx-nxp-bsp:imxdrm:imxpxp:mx9-generic-bsp:mx9-nxp-bsp:mx93-generic-bsp:mx93-nxp-bsp:ccimx93:ccimx93:ccimx93-dvk"
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
If the default r/w rootfs is not found it will try to do a
fallback to the squashfs image.
In the nand devices additionally we need to set the rootfstype
to squashfs.
https://onedigi.atlassian.net/browse/DEL-8638
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
When booting from a microSD, the variable 'boot_device' is
set to "mmc". Check this to fall back to booting Linux from
the microSD partitions.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
These are files for programming images with STM32CubeMX tool.
We don't use the tool or the files. Remove the task to avoid build
warnings.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
BOOTDEVICE_LABELS defines the supported boot device (NAND by default).
BOOTSCHEME_LABELS defines the which kind of boot is supported.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
We will use BOOTDEVICE_LABELS as a means to add 'sdcard'
configuration to TF_A_CONFIG within meta-st-stm32 so there
is no need to have a wrapper variable in meta-digi.
This reverts commit 7cf314ba80.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
We will use BOOTDEVICE_LABELS as a means to add 'sdcard'
configuration to TF_A_CONFIG within meta-st-stm32 so there
is no need to have a wrapper variable in meta-digi.
This reverts commit c6f19a099c.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Digi's mechanism to use a custom Linux kernel defconfig is
based on setting the variable KERNEL_DEFCONFIG, however ST
implements their own mechanism with a custom variable
KERNEL_EXTERNAL_DEFCONFIG. When providing an external defconfig,
the variable needs to be set, otherwise a build error
will be generated. So to keep compatibility with NXP
platforms, this commit weakly assigns KERNEL_EXTERNAL_DEFCONFIG
to a default value "defconfig".
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
ConnectCore Cloud Services examples are included in 'dey-examples' repository
so they can be built from here and also imported in Eclipse/Digi Application
Development Environment for Linux with the samples wizard.
The example 'upload_file' has been removed since currently there is no support
for binary data points in the CCCS daemon/client model.
https://onedigi.atlassian.net/browse/DEL-8628
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
This recipe generates several packages:
* 'cccs' includes the CCCS shared library
* 'cccs-daemon' includes the binary and resources to execute the CCCS daemon
(daemon, service and init scripts, configuration file)
* 'cccs-cert' includes the required certificate to use CCCS daemon
* 'cccs-gs-demo' includes the binary and resources to execute the CCCS get
started demo (binary, service and init scripts)
* 'cccs-legacy' includes the binary (all-in-one) application to execute
the legacy CCCS application (aka cloud-connector) and the configuration
file
* 'cccs-legacy-dev' includes resources to develop legacy CCCS applications
(all-in-one) (header files inside 'cloud-connector' and 'cloudconnector.pc'
pkg config file)
* 'cccs-legacy-staticdev' includes static resources to develop legacy CCCS
applications (all-in-one) (static library)
This commit also renames:
* 'CLOUDCONNECTOR_PKGS' variable to 'CCCS_PKGS'.
* 'CC_DEVICE_TYPE' variable to 'CCCS_DEVICE_TYPE'.
https://onedigi.atlassian.net/browse/DEL-8628
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
Until now, for dualboot systems, all boot variables were calculated on each boot depending on the value of the
'active_system'. These variables are used to boot the device but were not saved, which could lead to a missmatch
between their value in the environment and their required values to correctly boot the system. This commit
simplifies a bit the variables calculation and adds a block to synchronize their value in the environment.
Signed-off-by: David Escalona <david.escalona@digi.com>
All the 'altboot' script functionality has been moved directly to the 'altbootcmd' command
in U-Boot, so this script is no longer necessary. Remove it for all platforms.
https://onedigi.atlassian.net/browse/DEL-8674
Signed-off-by: David Escalona <david.escalona@digi.com>
The install scripts from SD/USB use a fixed image name.
If you are trying to install a different image you need to set
the env variable 'image-name' first.
Add a helper message if default files are not found to
avoid needing to go to the documentation.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Javier Viguera
Francisco Gil
Mike Engel
Isaac Hermida
Hector Palacios
Arturo Buzarra
Tatiana Leon
David Escalona