The old fsl_otp driver is deprecated and we need to determine
if the device is closed using a new property of the device tree
called 'digi,tf-closed'.
Assume the device is open if the property is not found.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7185
- OTP section
- Use just one fixed path to the OTP nvmem device descriptor (instead
of a loop).
- Use '-v' for dumping all values with hexdump.
- TrustFence section
- For cc8x, determine if the device is closed by checking a new boolean
property on the DT: digi,tf-open|closed
- For the rest, check the SEC_CONFIG[1] bit using the new nvmem
descriptor.
- Change log from 'Device status' to 'Security status'
- Report UNKNOWN if nvmem device does not exist.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7185
Busybox's device manager mdev was originally meant to be set up by writing its
path to /proc/sys/kernel/hotplug before launching it, but that entry no longer
exists in Linux v5.4's procfs and mdev can be launched directly.
Since mdev is the element in the recovery initramfs that is in charge of
mounting all partitions where .swu packages can be found (update partition on
the eMMC/MTD, uSD and USB), checking for the existence of the hotplug entry in
the procfs before launching mdev in v5.4 was preventing the partitions from
being mounted, and causing all software updates to fail.
While at it, move the two second delay to before mdev is launched, so all
partitions can be mounted. Otherwise, some devices such as the USB might not
be ready when mdev is launched, causing its partition to not be mounted.
https://jira.digi.com/browse/DEL-7143
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This recipe was originally ported from the zeus branch of poky into the dey-2.6
meta-digi branch to support the pkcs11 feature in cryptoauthlib. Now that we've
migrated to zeus, the recipe is now duplicated and no longer necessary.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Starting with Linux v4.15, regulatory domains are no longer handled via CRDA,
but via the kernel and a flexible database instead. Said database is included
in the wireless-regdb-static package, which conflicts with the old
wireless-regdb package.
To accomodate for this new package, add CRDA as a dependency for ccimx6
platforms only, and incorporate wireless-regdb-static for the rest of the
platforms. Additionally, the ccimx6 kernel should inherit the
kernel_wireless_regdb .bbclass so the plaintext database is copied to the
kernel sources, but since we use the same recipe for all kernel versions and
ccimx6 platforms are not yet supported in zeus, omit this change for now.
Remove the package-base .bbappend, since only ccimx6ulstarter images include
that packagegroup and they require wireless-regdb-static, anyway.
By adding the regulatory database, we avoid delays when going to suspend,
caused by the kernel waiting for the database to appear.
https://jira.digi.com/browse/DEL-7133
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Revert partially commit 1fb65f08 ("qtbase: apply imxgpu2d patches to imx8mn
platforms as well"), since it was fixed in meta-freescale layer in the commit
626e271b ("qtbase: Add i.MX 8 configuration")
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Gstreamer package was updated to v1.16.2 in poky layer, so
we need to update the base files used in meta-digi.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Commit 9d4490a ("qtwayland: really use OpenGL ES 2 API for decoration blitter")
from meta-qt5 layer backports an upstream patch to Yocto 3.0 (Zeus), which
conflicts with the same patch integrated in meta-digi layer.
This commit removes the patch from meta-digi.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit backports the IEEE 802.11r support from the later version v1.20
and integrates it in NetworkManager v1.18 supported by Yocto 3.0 (Zeus)
https://jira.digi.com/browse/CC6UL-1110
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit integrates support for the IEEE 802.11r protocol to operate with
fast roaming networks.
https://jira.digi.com/browse/CC6UL-1110
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
With the change of bsp now we have several entries under
/sys/bus/nvmem/devices/ in the CC6UL platform and we should
reduce the num of folders where the otp folder can be found.
ls /sys/bus/nvmem/devices/
bootloader
environment
imx-ocotp0
linux
recovery
rootfs
safe
update
https://jira.digi.com/browse/DEL-7082
Signed-off-by: Francisco Gil Martinez <francisco.gilmartinez@digi.com>
MMC core block has changed in kernel 5.4 so Replay Protected Memory Block (RPMB)
and boot partitions are not listed under /proc/partitions anymore.
get_emmc_block_device() function in pkg_postinst_ontarget() method was looking
for these entries to identify the MMC partition where to execute resize2fs.
This function has been modified to do the checks inside /dev/mmcblk* where RPMB
and boot entries are still listed.
https://jira.digi.com/browse/DEL-7094
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
This allows to generalize the code instead of needing to replicate
overrides for each platform that contains the MCA.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Based on commit ed2c4974 ("imx-gpu-viv: remove wayland as a requirement for
i.MX8 platforms"), this commit removes the requeriment of wayland as a backend
for the i.MX8 platforms to build framebuffer images.
https://jira.digi.com/browse/DEL-7013
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Commit 3418d1326c ("populate_sdk_base: provide options to set sdk type")
in poky layer introduces a new mechanism to create different archive types
for the sdk, and the function tar_sdk was renamed to archive_sdk.
This commit updates the custom SDK_POSTPROCESS_COMMAND variable with the new
function name.
https://jira.digi.com/browse/DEL-7013
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
There is a mismatch between the new upstream recipe that uses a cache folder
to share the header files and the imx recipe that requires a specific folder.
https://jira.digi.com/browse/DEL-7013
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Bluetooth class to support the bluez4/bluez5 distro features,
was removed due to bluez4 was removed from meta-oe some time ago.
This commit simplifies the requeriments adding directly the bluez5,
instead of the intermediate bluetooth class.
https://jira.digi.com/browse/DEL-7013
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Gabriel Valcazar
Hector Palacios
Francisco Gil Martinez
Arturo Buzarra
Hector Bujanda