- OTP section
- Use just one fixed path to the OTP nvmem device descriptor (instead
of a loop).
- Use '-v' for dumping all values with hexdump.
- TrustFence section
- For cc8x, determine if the device is closed by checking a new boolean
property on the DT: digi,tf-open|closed
- For the rest, check the SEC_CONFIG[1] bit using the new nvmem
descriptor.
- Change log from 'Device status' to 'Security status'
- Report UNKNOWN if nvmem device does not exist.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7185
With the change of bsp now we have several entries under
/sys/bus/nvmem/devices/ in the CC6UL platform and we should
reduce the num of folders where the otp folder can be found.
ls /sys/bus/nvmem/devices/
bootloader
environment
imx-ocotp0
linux
recovery
rootfs
safe
update
https://jira.digi.com/browse/DEL-7082
Signed-off-by: Francisco Gil Martinez <francisco.gilmartinez@digi.com>
This allows to generalize the code instead of needing to replicate
overrides for each platform that contains the MCA.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Bluetooth class to support the bluez4/bluez5 distro features,
was removed due to bluez4 was removed from meta-oe some time ago.
This commit simplifies the requeriments adding directly the bluez5,
instead of the intermediate bluetooth class.
https://jira.digi.com/browse/DEL-7013
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This package has not been supported since OpenSSL was updated to v1.1.x, and it
has been deprecated by Microchip.
https://jira.digi.com/browse/DEL-6826
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Digi Embedded Yocto 2.6-r2.2
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Otherwise, users that are behind corporate firewalls might not be able to
obtain the package sources.
https://jira.digi.com/browse/DEL-6663
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
-p : Test the standard periodic interrupts (uses timers, doesn't wake from low power)
-u : Test the standard 1 Hz interrupt (uses RTC ALARM)
-v : Test MCA periodic interrupts (uses RTC PERIODIC_IRQ)
-w : Test MCA 1 Hz interrupt (uses RTC 1HZ)
https://jira.digi.com/browse/DEL-6602
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
The watchdog and ADC devices were not being modified to belong
to 'digiapix' group, so the examples did not run properly when
ran as a user different than root.
Reported-by: Andreas Burghart <andreas.burghart@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6581
Digi Embedded Yocto 2.6-r1.3
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The exported PWM channels now report the channel name under udev
EXPORT parameter.
Add the 'change' udev action type to the udev rules and use that
parameter to change the group ownership of the PWM channels to
digiapix group, so they can be used by non-root user.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
With the re-organisation of the python3 packaging, some of the
packages have disappeared and are now part of base packages.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
For CC6/CC6Plus
- Add USER_LED0 alias (same as default USER_LED)
- Change aliases of the other LEDs to USER_LED1 and
USER_LED2 (without additional underscore and fixed
indexes, to match the board schematics)
For CC8X SBC Pro
- Add USER_LED0 alias (same as default USER_LED)
- Add USER_LED1 which was missing
- Increase indexes (due to removed MCA_IO19 on SOM v3)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Gabriel Valcazar
Hector Palacios
Francisco Gil Martinez
Arturo Buzarra
Hector Bujanda
Jose Diaz de Grenu
Mike Engel
Gonzalo Ruiz
Alex Gonzalez