The scripts need to know the SOC's revision to be able to select the correct
imx-boot image. Modify the boot-artifacts bbclass so the renamed imx-boot files
are included in the installation .zip.
Also, bypass the SECO fw check in the uSD script so it can install future
versions that aren't recognized by U-Boot's SECO fw checking logic. The UUU
script doesn't require this bypass, since it doesn't use the Digi update
command to flash the bootloader.
https://jira.digi.com/browse/DEL-7069
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Modify the imx-seco recipe so it deploys the B0 and C0 versions of the SECO
firmware, Then, modify the imx-boot recipe so it builds every possible
combination of:
* RAM configuration
* imx-boot target (with and without M4 demos)
* Silicon revision
https://jira.digi.com/browse/DEL-7069
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
With the device tree overlays mechanism in place, the bootscript
doesn't need to set the fdt_file variable. Instead, it will use
the value it has (which can be changed by the user) and it will
simply update the 'overlays' variable with the device tree
overlays that apply basing on the hardware capabilities found
on the HWID, SOM version, and carrier board version.
This allows a user to override the default fdt_file to point
to his custom device tree, but still make use of the boot script
for hardware-detected overlays.
Without the need to set the base filename, the boot script is the
same for any carrier board of the ccimx8x SOM, so this commit
moves it to a common folder.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Each platform now has only one base device tree, meant for the i.MX8DX variants
of the ccimx8x boards. Apply the QXP overlay in the bootscript if the SOC is
identified as an i.MX8QXP.
Since we want to give this overlay a higher priority than the SOM overlays
(wifi and bluetooth), prepend it to the overlay list after appending the SOM
overlays.
https://jira.digi.com/browse/DEL-7100
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These overlays aren't handled in our bootscript, but we make them available for
users in case they wish to use alternative interface configurations.
https://jira.digi.com/browse/DEL-7100
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Remove the old wb device trees from the ccimx8x-sbc-express and ccimx8x-sbc-pro
configuration files and add the ccimx8x wifi and bt overlays. Modify both
platforms' bootscripts to apply the overlays depending on board_id, hardware
capabilities or module variants.
https://jira.digi.com/browse/DEL-7100
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The function that parsed the output for a U-Boot variable value
was receiving a multi-line output, with blank lines that were
not being properly processed.
Simplify the parsing by using 'sed' command.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-951
The if condition expanded to nothing so the install command was
never called. Apart from that the install command was wrong and
missing the '-m' option for modifier.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This allows to generalize the code instead of needing to replicate
overrides for each platform that contains the MCA.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The variable BT_DEVICE_NAME is used to name the Bluetooth device name on
the BlueZ configuration file. Re-use the contents of DIGI_FAMILY (except
for ccimx6qp which re-writes it) to simplify platform definitions.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
- WLAN_P2P_INTERFACE is the same for all platforms: "p2p0".
- WLAN_P2P_DEVICE_NAME can be built out of ${DIGI_FAMILY} except for
the ccimx6qp, that's why it has a weak default assignment.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Platform-based variable STORAGE_MEDIA, allows us to select the
correct configuration file without needing to replicate it per
platform.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This overlay is not handled in our bootscript, but we add it to the Linux
partition in case users want to apply it manually.
https://jira.digi.com/browse/DEL-2609
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Parse the hardware version from the HWID and load the overlay if and only if
the revision is "1". Also, update the board's device tree list accordingly.
https://jira.digi.com/browse/DEL-7070
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Instead of having two separate device trees for the non-wireless and wireless
variants of the ccimx8mn, use the non-wireless .dtb as a base and apply the
overlays in the bootscript depending on the variant's capabilities.
Also, update the board's device tree list accordingly.
https://jira.digi.com/browse/DEL-2609
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This reverts commit 03d40edfd0.
The build of U-Boot without the flags field, incorporated changes
that made the Cortex M4 acquired certain resources (like GPIOs)
that were later not available for the Cortex A35 cores.
Revert this patch so that such changes only take place on images
that contain the M4 applications.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7073
(cherry picked from commit 28ce9340f55a35199dacf1bcbf83dc016b6a2fc7)
Update to NXP's v1.4.0 porting kit, fix an issue with resource allocation
making some GPIOs unusable from the Cortex A35s and update the DCDs using NXP's
RPA v14.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Digi customized linux kernel gpio.h file to allow debounce functionality by the
user space through the character device.
This commit patches the gpio.h file that is used to generate the SDK (which comes
from kernel 5.4) with Digi debounce additions.
https://jira.digi.com/browse/DEL-7027
Signed-off-by: Hector Bujanda hector.bujanda@digi.com
Added rsync to the native dependencies, since it is used during
header install to prevent a build issue.
https://jira.digi.com/browse/DEL-7013
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Default version is defined in poky layer, this commit also modifies
the preferred version to match with the new one.
https://jira.digi.com/browse/DEL-7013
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Remove support to kernel v4.14 and move platforms to use the new
kernel v5.4
https://jira.digi.com/browse/DEL-7013
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
packagegroup-base includes wireless-regdb-static package unconditionally,
however it conflicts with wireless-regdb that it is required by crda,
which is included as a dependency to packagagroup-dey-wireless.
https://jira.digi.com/browse/DEL-7013
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
In meta-freescale was renamed the linux-imx-headers recipe with the
full linux kernel version "4.14.98". With that change our custom
recipe from meta-digi is not selected. This commit reuses the recipe
from meta-freescale layer and modifies it.
https://jira.digi.com/browse/DEL-7001
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update u-boot-fw-utils patches to apply on upstream version 2019.07.
https://jira.digi.com/browse/DEL-7013
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Digi customized linux kernel gpio.h file to allow debounce functionality by the
user space through the character device.
This commit patches the default gpio.h file that is used to generate the SDK
(which comes from kernel 4.18) with Digi debounce additions.
https://jira.digi.com/browse/DEL-7027
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
Add Trustfence support for signing imx-boot images:
- Install a different U-Boot signing script for images with U-Boot SPL.
- Store mkimage log for later use in the signing script
- make 'print_hab_log' and store its log for later use in the signing script
https://jira.digi.com/browse/DEL-7023
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Do not evaluate TRUSTFENCE_SIGN_MODE on conditions where the sign mode
is not relevant:
1) U-Boot binary file should be signed directly after building it when simple
U-Boot images are used, but it should not be signed when imx-boot bundled
images are used.
For those, the signing process is performed later over the whole imx-boot
bundled binary file on a different recipe.
We use BOOTLOADER_IMAGE_RECIPE variable to evaluate this distinction.
BOOTLOADER_IMAGE_RECIPE is set to "u-boot" by default and is set to "imx-boot"
on ccimx8x and ccimx8mn machine configuration files.
2) For signing imx-boot images we should treat differently those images that
include the RAM configuration in their name and those that don't, as we do
for the rest of the tasks in the same recipe. We can ignore the sign mode
method in this case.
https://jira.digi.com/browse/DEL-7023
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Some CC6Plus units fail to communicate with the Bluetooth chip at a certain
temperature range, as happened on some CC6UL units.
Apply the following customizations to the NVM file so the communication is
maintained regardless of the temperature.
- Disable DEEP_SLEEP
- Enable Internal Clock
These customizations were already performed on the NVM file for the CC6UL.
https://jira.digi.com/browse/DEL-3711
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit 400b31f652fb98bb1620e03f85a33c231bf6f244)
Generalize 'Disable Deep Sleep' and 'Enable Internal clock' customizations
so they can be applied on every platform by defining
BT_INTCLOCK_WORKAROUND to '1'.
Disable the customizations by default and enable them for ccimx6ul only.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit 78ef498178abe587d6e2cb4b1ed8ba5f8979fb4e)
We are currently applying customizations to the base NVM file on install.
There was an error that introduced the '"\' characters into the NVM file
instead of the intended hex data.
This commit fixes the implementation of this customization.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit a204a7bfc54fc15aca0d87530c838fb427710a8e)
This commit adds a installation script that uses fastboot support to
update the target firmware.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-6845
Gabriel Valcazar
Hector Palacios
Mike Engel
Hector Bujanda
Arturo Buzarra
Gonzalo Ruiz